    

 ## On this page

  

 

 # Postprocessing definition classes

 Last update: 20.02.2025 

## [`CombinedFailureCriteria`](#compolyx.CombinedFailureCriteria)

### *class* compolyx.CombinedFailureCriteria(graph, obj, failure\_criteria=\[\], parent=None)

CombinedFailureCriteria class.

#### *property* enabled

Whether this object is currently enabled or not. Mainly defined through the current application mode pre or post.

#### serialize()

Serialize to Python string.

### [`MaxStressCriterion`](#compolyx.MaxStressCriterion)

### *class* compolyx.MaxStressCriterion(s1=1, s2=1, s3=0, s12=1, s13=0, s23=0, wf\_s1=1.0, wf\_s2=1.0, wf\_s3=1.0, wf\_s12=1.0, wf\_s13=1.0, wf\_s23=1.0)

Max stress failure criterion configuration.

Properties are s1, s2, s3, s12, s13, s23, wf\_s1, wf\_s2, wf\_s3, wf\_s12, wf\_s13, wf\_s23.

For instance, MaxStressCriterion(s1=1, s2=1, s3=0, s12=1, s13=0, s23=0, wf\_s1=1, wf\_s2=1, wf\_s3=1, wf\_s12=1, wf\_s13=1, wf\_s23=1).

#### *property* s1

Specifies whether to compute max stress in the material 1 direction.

#### *property* s12

Specifies whether to compute max shear stress in the material 1 direction.

#### *property* s13

Specifies whether to compute max normal stress in the material 1 direction.

#### *property* s2

Specifies whether to compute max stress in the material 2 direction.

#### *property* s23

Specifies whether to compute max normal stress in the material 2 direction.

#### *property* s3

Specifies whether to compute max stress in the material 3 direction.

#### serialize()

Serialize to Python string.

#### *property* wf\_s1

Weighting factor of s1.

#### *property* wf\_s12

Weighting factor of s12.

#### *property* wf\_s13

Weighting factor of s13.

#### *property* wf\_s2

Weighting factor of s2.

#### *property* wf\_s23

Weighting factor of s23.

#### *property* wf\_s3

weighting factor of s3.

### [`MaxStrainCriterion`](#compolyx.MaxStrainCriterion)

### *class* compolyx.MaxStrainCriterion(e1=1, e2=1, e3=0, e12=1, e13=0, e23=0, wf\_e1=1.0, wf\_e2=1.0, wf\_e3=1.0, wf\_e12=1.0, wf\_e13=1.0, wf\_e23=1.0, eXt=0.0, eXc=0.0, eYt=0.0, eYc=0.0, eZt=0.0, eZc=0.0, eSxy=0.0, eSxz=0.0, eSyz=0.0, force\_global\_strain\_limits=False)

Max strain failure criterion configuration.

#### *property* e1

Specifies whether to compute max strain in the material 1 direction.

#### *property* e12

Specifies whether to compute max shear 12 strain.

#### *property* e13

Specifies whether to compute max shear 13 strain.

#### *property* e2

Specifies whether to compute max strain in the material 2 direction.

#### *property* e23

Specifies whether to compute max shear 23 strain.

#### *property* e3

Specifies whether to compute max strain in the material 3 direction.

#### *property* eSxy

Global limit shear strain in material 12 direction.

#### *property* eSxz

Global limit shear strain in material 13 direction.

#### *property* eSyz

Global limit shear strain in material 23 direction.

#### *property* eXc

Global limit compression strain in material 1 direction.

#### *property* eXt

Global limit tension strain in material 1 direction.

#### *property* eYc

Global limit compression strain in material 2 direction.

#### *property* eYt

Global limit tension strain in material 2 direction.

#### *property* eZc

Global limit compression strain in material 3 direction.

#### *property* eZt

Global limit tension strain in material 3 direction.

#### *property* force\_global\_strain\_limits

Force to use global strain limits.

#### serialize()

Serialize to Python string.

#### *property* wf\_e1

Weighting factor of e1.

#### *property* wf\_e12

Weighting factor of e12.

#### *property* wf\_e13

Weighting factor of e13.

#### *property* wf\_e2

Weighting factor of e2.

#### *property* wf\_e23

Weighting factor of e23.

#### *property* wf\_e3

Weighting factor of e3.

### [`TsaiWu`](#compolyx.TsaiWu)

### *class* compolyx.TsaiWu(dim=2, wf=1.0)

Tsai Wu failure criterion configuration.

#### *property* dim

Dimension of the Tsai-Wu failure criterion (2 or 3).

#### serialize()

Serialize to Python string.

#### *property* wf

Weighting factor.

### [`TsaiHill`](#compolyx.TsaiHill)

### *class* compolyx.TsaiHill(dim=2, wf=1.0)

Tsai Hill failure criterion configuration.

#### *property* dim

Dimension of the Tsai-Hill failure criterion (2 or 3).

#### serialize()

Serialize to Python string.

#### *property* wf

Weighting factor.

### [`Hashin`](#compolyx.Hashin)

### *class* compolyx.Hashin(dim=2, hf=1, hm=1, hd=1, wf\_hf=1.0, wf\_hm=1.0, wf\_hd=1.0)

Hashin failure criterion configuration.

#### *property* dim

Dimension of the Hashin failure criterion (2 or 3).

#### *property* hd

Specifies whether to compute delamination.

#### *property* hf

Specifies whether to compute fiber failure.

#### *property* hm

Specifies whether to compute matrix failure.

#### serialize()

Serialize to Python string.

#### *property* wf\_hd

Weighting factor.

#### *property* wf\_hf

Weighting factor.

#### *property* wf\_hm

Weighting factor.

### [`Hoffman`](#compolyx.Hoffman)

### *class* compolyx.Hoffman(dim=2, wf=1.0)

Hoffman failure criterion configuration.

#### *property* dim

Dimension of the Hoffman failure criterion (2 or 3).

#### serialize()

Serialize to Python string.

#### *property* wf

Weighting factor.

### [`Puck`](#compolyx.Puck)

### *class* compolyx.Puck(dim=2, force\_global\_constants=False, p21\_pos=0.325, p21\_neg=0.275, p22\_neg=0.225, p22\_pos=0.225, s=0.5, M=0.5, interface\_weakening\_factor=0.8, pf=1, pmA=1, pmB=1, pmC=1, pd=1, wf\_pf=1.0, wf\_pmA=1.0, wf\_pmB=1.0, wf\_pmC=1.0, wf\_pd=1.0, cfps=True)

Puck failure criterion configuration.

#### *property* M

Degradation factor (Default = 0.5).

#### *property* cfps

Specifies whether to consider the influence of fiber parallel stresses on inter-fiber failure.

#### *property* dim

dimension of the puck failure criterion (1, 2 or 3).

#### *property* force\_global\_constants

Use global Puck constants instead of material specific values.

#### *property* interface\_weakening\_factor

Interface weakening factor (Default = 0.8).

#### *property* p21\_neg

Inclination of the failure curve for negative normal matrix stresses (Default = 0.275).

#### *property* p21\_pos

Inclination of the failure curve for positive normal matrix stresses (Default = 0.325).

#### *property* p22\_neg

Inclination of the failure curve for negative normal matrix stresses (Default = 0.225).

#### *property* p22\_pos

Inclination of the failure curve for positive normal matrix stresses (Default = 0.225).

#### *property* pd

Specifies whether to compute delamination.

#### *property* pf

Specifies whether to compute fiber failure.

#### *property* pmA

Specifies whether to compute matrix tension failure.

#### *property* pmB

Specifies whether to compute matrix compression failure.

#### *property* pmC

Specifies whether to compute matrix shear failure.

#### *property* s

Degradation factor (Default = 0.5).

#### serialize()

Serialize to Python string.

#### *property* wf\_pd

Weighting factor.

#### *property* wf\_pf

Weighting factor.

#### *property* wf\_pmA

Weighting factor.

#### *property* wf\_pmB

Weighting factor.

#### *property* wf\_pmC

Weighting factor.

### [`Wrinkling`](#compolyx.Wrinkling)

### *class* compolyx.Wrinkling(q\_homogeneous=0.5, q\_honeycomb=0.33, wf\_wr=1.0)

Configuration of wrinkling failure criterion for sandwich structures.

#### *property* q\_homogeneous

Wrinkling coefficient for sandwiches with homogeneous core. Default = 0.5.

#### *property* q\_honeycomb

Wrinkling coefficient for sandwiches with honeycomb core. Default = 0.33.

#### serialize()

Serialize to Python string.

#### *property* wf\_wr

Weighting factor.

### [`CoreShear`](#compolyx.CoreShear)

### *class* compolyx.CoreShear(ins=False, iss=True, wf\_cs=1.0)

Configuration of core shear failure criterion for sandwich structures.

#### *property* ins

Whether to compute sandwich core shear criterion under consideration of interlaminar normal stresses. Default = False.

#### *property* iss

Whether to compute sandwich core shear criterion under consideration of interlaminar shear stresses. Default = True.

#### serialize()

Serialize to Python string.

#### *property* wf\_cs

Weighting factor.

### [`Larc`](#compolyx.Larc)

### *class* compolyx.Larc(dim=2, lft=1, lfc=1, lmt=1, lmc=1, wf\_lft=1.0, wf\_lfc=1.0, wf\_lmt=1.0, wf\_lmc=1.0)

LaRC failure criterion configuration.

#### *property* dim

Dimension of the LARC failure criterion (2 or 3).

#### *property* lfc

Specifies whether to compute fiber compression failure.

#### *property* lft

Specifies whether to compute fiber tension failure.

#### *property* lmc

Specifies whether to compute matrix compression failure.

#### *property* lmt

Specifies whether to compute matrix tension failure.

#### serialize()

Serialize to Python string.

#### *property* wf\_lfc

Weighting factor for lfc.

#### *property* wf\_lft

Weighting factor for lft.

#### *property* wf\_lmc

Weighting factor for lmc.

#### *property* wf\_lmt

Weighting factor for lmt.

### [`Cuntze`](#compolyx.Cuntze)

### *class* compolyx.Cuntze(dim=2, cft=1, cfc=1, cmA=1, cmB=1, cmC=1, wf\_cft=1.0, wf\_cfc=1.0, wf\_cmA=1.0, wf\_cmB=1.0, wf\_cmC=1.0, b21=0.2, b32=1.38, fracture\_plane\_angle=53.0, m=2.6)

Puck failure criterion configuration.

#### *property* b21

In-plane shear related friction parameter (between 0.1 and 0.6, default = 0.2).

#### *property* b32

Out-of-plane shear related friction parameter (between 1.0 and 1.6, default = 1.38).

#### *property* cfc

Specifies whether to compute fiber compression failure.

#### *property* cft

Specifies whether to compute fiber tensile failure.

#### *property* cmA

Specifies whether to compute matrix tension failure.

#### *property* cmB

Specifies whether to compute matrix compression failure.

#### *property* cmC

Specifies whether to compute matrix wedge shape failure.

#### *property* dim

Dimension of the cuntze failure criterion (2 or 3).

#### *property* fracture\_plane\_angle

Angle between the out-of-plane axis and fracture plane in degree (&gt; 45), default = 53.

#### *property* m

Mode interaction coefficient (between \[2.0,4.0\], default = 2.6).

#### serialize()

Serialize to Python string.

#### *property* wf\_cfc

Weighting factor.

#### *property* wf\_cft

Weighting factor.

#### *property* wf\_cmA

Weighting factor.

#### *property* wf\_cmB

Wweighting factor.

#### *property* wf\_cmC

Weighting factor.

### [`VonMises`](#compolyx.VonMises)

### *class* compolyx.VonMises(vme=1, vms=1, iss=1, ins=0, wf\_vme=1.0, wf\_vms=1.0)

Von Mises failure criterion configuration.

#### *property* ins

Specifies wether to compute interlaminar normal stresses.

#### *property* iss

Specifies wether to compute interlaminar shear stresses.

#### serialize()

Serialize to Python string.

#### *property* vme

Specifies whether to compute von mises strain criteria.

#### *property* vms

Specifies whether to compute von mises stress criteria.

#### *property* wf\_vme

Weighting factor.

#### *property* wf\_vms

Weighting factor.

### [`ShearCrimping`](#compolyx.ShearCrimping)

### *class* compolyx.ShearCrimping(kc=1.0, kf=0.0, wf\_sc=1.0)

Configuration of core shear failure criterion for sandwich structures.

#### *property* kc

Core material factor. Default is 1.

#### *property* kf

Face sheet factor. Default is 0.

#### serialize()

Serialize to Python string.

#### *property* wf\_sc

Weighting factor.