    

 ## On this page

  

 

 # Spherical stop

 Last update: 09.03.2026 

This example describes the implementation of a spherical stop. A spherical stop is a joint that has 3 rotations (joints include spherical, slot, bushing, free and general joints). This specific type of stop creates a limit to the angle between the z-axis of the reference frame and the z-axis of the moving frame. This functionality is available using the following command:

```
AddStop(angle_max, restitution_factor)

```

For example, to add a spherical stop for an angle value equal to 0.45 radians and a restitution factor equal to 1.0, the following command would be issued:

```
Joint.AddStop(0.45,1.0)

```

An example of the model and the results of this command are shown below.

![Mechanical UI](/sites/default/files/git_ansys/command_reference_for_rigid_dynamics_systems_2026_r1_1/gds_cmdref_sp_stop_win.jpg)

![model](/sites/default/files/git_ansys/command_reference_for_rigid_dynamics_systems_2026_r1_1/gds_cmdref_sp_stop_pic.jpg)

![output](/sites/default/files/git_ansys/command_reference_for_rigid_dynamics_systems_2026_r1_1/gds_cmdref_sp_stop_results.jpg)