## On this page

  

 

 # `Mesh`

 Last update: 16.07.2025 

<a id="ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.MeshControls.Mesh"></a>

#### *class* Ansys.ACT.Automation.Mechanical.MeshControls.Mesh

Bases: [`object`](https://docs.python.org/3/library/functions.html#object)

Defines a Mesh.

<a id="overview"></a>

## Overview

### Methods

NameDescription[`Activate`](#Mesh.Activate)Activate the current object.[`ActivateAllSolidSurfaceWorksheetRows`](#Mesh.ActivateAllSolidSurfaceWorksheetRows)ActivateAllSolidSurfaceWorksheetRows method.[`ActivateAllSurfaceWorksheetRows`](#Mesh.ActivateAllSurfaceWorksheetRows)ActivateAllSurfaceWorksheetRows method.[`ActivateAllVolumeWorksheetRows`](#Mesh.ActivateAllVolumeWorksheetRows)ActivateAllVolumeWorksheetRows method.[`AddAutomaticMethod`](#Mesh.AddAutomaticMethod)Creates a new AutomaticMethod[`AddComment`](#Mesh.AddComment)Creates a new child Comment.[`AddConnect`](#Mesh.AddConnect)Creates a new Connect Control[`AddContactMatchGroup`](#Mesh.AddContactMatchGroup)Add a new AddContactMatchGroup.[`AddContactSizing`](#Mesh.AddContactSizing)Creates a new ContactSizing[`AddDeviation`](#Mesh.AddDeviation)Creates a new SagControl[`AddDirectMorph`](#Mesh.AddDirectMorph)Add a new DirectMorph.[`AddFaceMeshing`](#Mesh.AddFaceMeshing)Creates a new FaceMeshing[`AddFeatureSuppress`](#Mesh.AddFeatureSuppress)Creates a new FeatureSuppress[`AddFigure`](#Mesh.AddFigure)Creates a new child Figure.[`AddGeometryFidelity`](#Mesh.AddGeometryFidelity)Creates a new GeometryFidelity[`AddImage`](#Mesh.AddImage)Creates a new child Image.[`AddInflation`](#Mesh.AddInflation)Creates a new Inflation[`AddManualMeshConnection`](#Mesh.AddManualMeshConnection)Add a new ManualMeshConnection[`AddMatchControl`](#Mesh.AddMatchControl)Creates a new MatchControl[`AddMeshConnectionGroup`](#Mesh.AddMeshConnectionGroup)Add a new MeshConnectionGroup.[`AddMeshCopy`](#Mesh.AddMeshCopy)Creates a new MeshCopy[`AddNodeMerge`](#Mesh.AddNodeMerge)Add a new NodeMerge.[`AddNodeMergeGroup`](#Mesh.AddNodeMergeGroup)Add a new NodeMergeGroup.[`AddPinch`](#Mesh.AddPinch)Creates a new Pinch[`AddPullExtrude`](#Mesh.AddPullExtrude)Add a new Pull (Extrude).[`AddPullRevolve`](#Mesh.AddPullRevolve)Add a new Pull (Revolve).[`AddPullSurfaceCoating`](#Mesh.AddPullSurfaceCoating)Add a new Pull (Surface Coating)).[`AddRefinement`](#Mesh.AddRefinement)Creates a new Refinement[`AddRepairTopology`](#Mesh.AddRepairTopology)Creates a new RepairTopology[`AddSizing`](#Mesh.AddSizing)Creates a new Sizing[`AddWasher`](#Mesh.AddWasher)Creates a new SagControl[`AddWeld`](#Mesh.AddWeld)Creates a new WeldControl[`CleanPartOrBody`](#Mesh.CleanPartOrBody)Clear generated data for parts and/or bodies provided.[`ClearGeneratedData`](#Mesh.ClearGeneratedData)Run the ClearGeneratedData action.[`CopyTo`](#Mesh.CopyTo)Copies all visible properties from this object to another.[`CreateMQSolidSurfaceElementsNamedSelection`](#Mesh.CreateMQSolidSurfaceElementsNamedSelection)Create Mesh Quality SolidSurface Element Name Selection[`CreateMQSurfaceElementsNamedSelection`](#Mesh.CreateMQSurfaceElementsNamedSelection)Create Mesh Quality Surface Element Named Selection[`CreateMQVolumeElementsNamedSelection`](#Mesh.CreateMQVolumeElementsNamedSelection)Create Mesh Quality Volume Element Name Selection[`CreateParameter`](#Mesh.CreateParameter)Creates a new parameter for a Property.[`CreatePinchControls`](#Mesh.CreatePinchControls)Run the CreatePinchControls action.[`DeactivateAllSolidSurfaceWorksheetRows`](#Mesh.DeactivateAllSolidSurfaceWorksheetRows)DeactivateAllSolidSurfaceWorksheetRows method.[`DeactivateAllSurfaceWorksheetRows`](#Mesh.DeactivateAllSurfaceWorksheetRows)DeactivateAllSurfaceWorksheetRows method.[`DeactivateAllVolumeWorksheetRows`](#Mesh.DeactivateAllVolumeWorksheetRows)DeactivateAllVolumeWorksheetRows method.[`Duplicate`](#Mesh.Duplicate)Creates a copy of the current DataModelObject.[`GenerateMesh`](#Mesh.GenerateMesh)Run the GenerateMesh action.[`GetActiveSurfaceMeshQuality`](#Mesh.GetActiveSurfaceMeshQuality)Get Active User Mesh Quality[`GetChildren`](#Mesh.GetChildren)Gets the list of children, filtered by type.[`GetIsShellTargetMetric`](#Mesh.GetIsShellTargetMetric)Get Shell Target Metric[`GetIsSolidSurfaceTargetMetric`](#Mesh.GetIsSolidSurfaceTargetMetric)Get SolidSurface Target Metric[`GetIsSolidTargetMetric`](#Mesh.GetIsSolidTargetMetric)Get Solid Target Metric[`GetMeshMetricOptions`](#Mesh.GetMeshMetricOptions)GetMeshMetricOptions method.[`GetParameter`](#Mesh.GetParameter)Gets the parameter corresponding to the given property.[`GetSolidSurfaceMeshMetrics`](#Mesh.GetSolidSurfaceMeshMetrics)GetSolidSurfaceMeshMetrics method.[`GetSolidSurfaceMeshQualityAverageMetricValue`](#Mesh.GetSolidSurfaceMeshQualityAverageMetricValue)Get Mesh Quality Average Metric Value[`GetSolidSurfaceMeshQualityCountFailed`](#Mesh.GetSolidSurfaceMeshQualityCountFailed)Get Mesh Quality Count Failed[`GetSolidSurfaceMeshQualityErrorLimit`](#Mesh.GetSolidSurfaceMeshQualityErrorLimit)Get Mesh Quality Error Limit[`GetSolidSurfaceMeshQualityName`](#Mesh.GetSolidSurfaceMeshQualityName)Get Mesh Quality Name[`GetSolidSurfaceMeshQualityPercentageFailed`](#Mesh.GetSolidSurfaceMeshQualityPercentageFailed)Get Mesh Quality Percentage Failed[`GetSolidSurfaceMeshQualityWarningCountFailed`](#Mesh.GetSolidSurfaceMeshQualityWarningCountFailed)Get Mesh Quality Warning Count Failed[`GetSolidSurfaceMeshQualityWarningLimit`](#Mesh.GetSolidSurfaceMeshQualityWarningLimit)Get Mesh Quality Warning Limit[`GetSolidSurfaceMeshQualityWarningPercentageFailed`](#Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed)Get Mesh Quality Warning Percentage Failed[`GetSolidSurfaceMeshQualityWorstMetricBackgroundColor`](#Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor)Get Mesh Quality Worst Metric BackgroundColor[`GetSolidSurfaceMeshQualityWorstMetricValue`](#Mesh.GetSolidSurfaceMeshQualityWorstMetricValue)Get Mesh Quality Worst Metric Value[`GetSurfaceMeshQualityAverageMetricValue`](#Mesh.GetSurfaceMeshQualityAverageMetricValue)Get Mesh Quality Average Metric Value[`GetSurfaceMeshQualityCountFailed`](#Mesh.GetSurfaceMeshQualityCountFailed)Get Mesh Quality Count Failed[`GetSurfaceMeshQualityErrorLimit`](#Mesh.GetSurfaceMeshQualityErrorLimit)Get User Mesh Quality Error Limit[`GetSurfaceMeshQualityName`](#Mesh.GetSurfaceMeshQualityName)Get Mesh Quality Name[`GetSurfaceMeshQualityPercentageFailed`](#Mesh.GetSurfaceMeshQualityPercentageFailed)Get Mesh Quality Percentage Failed[`GetSurfaceMeshQualityWarningCountFailed`](#Mesh.GetSurfaceMeshQualityWarningCountFailed)Get Mesh Quality Warning Count Failed[`GetSurfaceMeshQualityWarningLimit`](#Mesh.GetSurfaceMeshQualityWarningLimit)Get User Mesh Quality Warning Limit[`GetSurfaceMeshQualityWarningPercentageFailed`](#Mesh.GetSurfaceMeshQualityWarningPercentageFailed)Get Mesh Quality Warning Percentage Failed[`GetSurfaceMeshQualityWorstMetricValue`](#Mesh.GetSurfaceMeshQualityWorstMetricValue)Get Mesh Quality Worst Metric Value[`GetVolumeMeshMetrics`](#Mesh.GetVolumeMeshMetrics)GetVolumeMeshMetrics method.[`GetVolumeMeshQualityAverageMetricValue`](#Mesh.GetVolumeMeshQualityAverageMetricValue)Get Mesh Quality Average Metric Value[`GetVolumeMeshQualityCountFailed`](#Mesh.GetVolumeMeshQualityCountFailed)Get Mesh Quality Count Failed[`GetVolumeMeshQualityErrorLimit`](#Mesh.GetVolumeMeshQualityErrorLimit)Get Mesh Quality Error Limit[`GetVolumeMeshQualityName`](#Mesh.GetVolumeMeshQualityName)Get Mesh Quality Name[`GetVolumeMeshQualityPercentageFailed`](#Mesh.GetVolumeMeshQualityPercentageFailed)Get Mesh Quality Percentage Failed[`GetVolumeMeshQualityWarningCountFailed`](#Mesh.GetVolumeMeshQualityWarningCountFailed)Get Mesh Quality Warning Count Failed[`GetVolumeMeshQualityWarningLimit`](#Mesh.GetVolumeMeshQualityWarningLimit)Get Mesh Quality Warning Limit[`GetVolumeMeshQualityWarningPercentageFailed`](#Mesh.GetVolumeMeshQualityWarningPercentageFailed)Get Mesh Quality Warning Percentage Failed[`GetVolumeMeshQualityWorstMetricBackgroundColor`](#Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor)Get Mesh Quality Worst Metric BackgroundColor[`GetVolumeMeshQualityWorstMetricValue`](#Mesh.GetVolumeMeshQualityWorstMetricValue)Get Mesh Quality Worst Metric Value[`GroupAllSimilarChildren`](#Mesh.GroupAllSimilarChildren)Run the GroupAllSimilarChildren action.[`GroupSimilarObjects`](#Mesh.GroupSimilarObjects)Run the GroupSimilarObjects action.[`IsMeshMetricVisible`](#Mesh.IsMeshMetricVisible)IsMeshMetricVisible method.[`LoadMQWorksheetFile`](#Mesh.LoadMQWorksheetFile)LoadMQWorksheetFile method.[`PinchControlGeomtry`](#Mesh.PinchControlGeomtry)Set the geometry type for the Pinch Control.[`PreviewInflation`](#Mesh.PreviewInflation)Run the PreviewInflation action.[`PreviewMeshOnAllWelds`](#Mesh.PreviewMeshOnAllWelds)Preview model mesh on all weld controls of the Mesh.[`PreviewMeshOnWeld`](#Mesh.PreviewMeshOnWeld)Preview model mesh on one weld control provided.[`PreviewMeshOnWeldWorksheet`](#Mesh.PreviewMeshOnWeldWorksheet)PreviewMeshOnWeldWorksheet method.[`PreviewMeshOnWelds`](#Mesh.PreviewMeshOnWelds)PreviewMeshOnWelds method.[`PreviewSurfaceMesh`](#Mesh.PreviewSurfaceMesh)Run the PreviewSurfaceMesh action.[`PreviewWelds`](#Mesh.PreviewWelds)Preview Welds.[`PropertyByAPIName`](#Mesh.PropertyByAPIName)Get a property by its API name.[`PropertyByName`](#Mesh.PropertyByName)Get a property by its unique name.[`RemoveParameter`](#Mesh.RemoveParameter)Removes the parameter from the parameter set corresponding to the given property.[`SaveMQWorksheetFile`](#Mesh.SaveMQWorksheetFile)SaveMQWorksheetFile method.[`SetActiveSolidSurfaceMeshQuality`](#Mesh.SetActiveSolidSurfaceMeshQuality)Set Active Mesh Quality[`SetActiveSurfaceMeshQuality`](#Mesh.SetActiveSurfaceMeshQuality)Set Active Mesh Quality[`SetActiveVolumeMeshQuality`](#Mesh.SetActiveVolumeMeshQuality)Set Active Mesh Quality[`SetMeshMetricOptions`](#Mesh.SetMeshMetricOptions)SetMeshMetricOptions method.[`SetSolidMeshMetricLimits`](#Mesh.SetSolidMeshMetricLimits)SetSolidMeshMetricLimits method.[`SetSolidSurfaceMeshMetricLimits`](#Mesh.SetSolidSurfaceMeshMetricLimits)SetSolidSurfaceMeshMetricLimits method.[`SetSolidSurfaceMeshQualityErrorLimit`](#Mesh.SetSolidSurfaceMeshQualityErrorLimit)Set Mesh Quality Error Limit[`SetSolidSurfaceMeshQualityWarningLimit`](#Mesh.SetSolidSurfaceMeshQualityWarningLimit)Set Mesh Quality Warning Limit[`SetSurfaceMeshMetricLimits`](#Mesh.SetSurfaceMeshMetricLimits)SetSurfaceMeshMetricLimits method.[`SetSurfaceMeshQualityErrorLimit`](#Mesh.SetSurfaceMeshQualityErrorLimit)Set Mesh Quality Error Level[`SetSurfaceMeshQualityWarningLimit`](#Mesh.SetSurfaceMeshQualityWarningLimit)Set Mesh Quality Warning Limit[`SetVolumeMeshQualityErrorLimit`](#Mesh.SetVolumeMeshQualityErrorLimit)Set Mesh Quality Error Limit[`SetVolumeMeshQualityWarningLimit`](#Mesh.SetVolumeMeshQualityWarningLimit)Set Mesh Quality Warning Limit[`ShowFeatureSuppressibleFaces`](#Mesh.ShowFeatureSuppressibleFaces)Run the ShowFeatureSuppressibleFaces action.[`ShowMappableBodies`](#Mesh.ShowMappableBodies)Run the ShowMappableBodies action.[`ShowOverlappingFaces`](#Mesh.ShowOverlappingFaces)Run the ShowOverlappingFaces action.[`ShowSweepableBodies`](#Mesh.ShowSweepableBodies)Run the ShowSweepableBodies action.[`ShowUnconnectedFacesNearEdges`](#Mesh.ShowUnconnectedFacesNearEdges)Run the ShowUnconnectedFreeEdges action.[`Update`](#Mesh.Update)Run the Update action.### Properties

NameDescription[`AspectRatio`](#Mesh.AspectRatio)Gets or sets the AspectRatio.[`AutomaticMeshBasedDefeaturing`](#Mesh.AutomaticMeshBasedDefeaturing)Gets or sets the AutomaticMeshBasedDefeaturing.[`Average`](#Mesh.Average)Gets the Average.[`Beam3`](#Mesh.Beam3)Gets the Beam3.[`Beam4`](#Mesh.Beam4)Gets the Beam4.[`BeamElements`](#Mesh.BeamElements)Gets the BeamElements.[`CaptureCurvature`](#Mesh.CaptureCurvature)Gets or sets the CaptureCurvature.[`CaptureProximity`](#Mesh.CaptureProximity)Gets or sets the CaptureProximity.[`CheckMeshQuality`](#Mesh.CheckMeshQuality)Gets or sets the CheckMeshQuality.[`Children`](#Mesh.Children)Gets the list of children.[`CollisionAvoidance`](#Mesh.CollisionAvoidance)Gets or sets the CollisionAvoidance.[`Comments`](#Mesh.Comments)Gets the list of associated comments.[`ConnectionSize`](#Mesh.ConnectionSize)Gets or sets the ConnectionSize.[`ConnectionTolerance`](#Mesh.ConnectionTolerance)Gets or sets the ConnectionTolerance.[`ConnectionToleranceList`](#Mesh.ConnectionToleranceList)Gets or sets the ConnectionToleranceList.[`CoplanarAngleTol`](#Mesh.CoplanarAngleTol)Gets or sets the CoplanarAngleTol.[`CornerNodes`](#Mesh.CornerNodes)Gets the CornerNodes.[`CurrentConfiguration`](#Mesh.CurrentConfiguration)Gets the Assembly Mesh’s current configuration Id.[`CurvatureNormalAngle`](#Mesh.CurvatureNormalAngle)Gets or sets the CurvatureNormalAngle.[`DataModelObjectCategory`](#Mesh.DataModelObjectCategory)Gets the current DataModelObject’s category.[`DefeatureTolerance`](#Mesh.DefeatureTolerance)Gets or sets the DefeatureTolerance.[`DisplayStyle`](#Mesh.DisplayStyle)Gets or sets the DisplayStyle.[`ElementOrder`](#Mesh.ElementOrder)Gets or sets the ElementOrder.[`ElementSize`](#Mesh.ElementSize)Gets or sets the ElementSize.[`Elements`](#Mesh.Elements)Gets the Elements.[`ExportFormat`](#Mesh.ExportFormat)Gets or sets the ExportFormat.[`ExportUnit`](#Mesh.ExportUnit)Gets or sets the ExportUnit.[`ExtraRetriesForAssembly`](#Mesh.ExtraRetriesForAssembly)Gets or sets the ExtraRetriesForAssembly.[`Figures`](#Mesh.Figures)Gets the list of associated figures.[`FilletRatio`](#Mesh.FilletRatio)Gets or sets the FilletRatio.[`FirstLayerHeight`](#Mesh.FirstLayerHeight)Gets or sets the FirstLayerHeight.[`GasketElements`](#Mesh.GasketElements)Gets the GasketElements.[`GeneratePinchOnRefresh`](#Mesh.GeneratePinchOnRefresh)Gets or sets the GeneratePinchOnRefresh.[`GlobalUseCustomTargetLimit`](#Mesh.GlobalUseCustomTargetLimit)Gets or sets the GlobalUseCustomTargetLimit.[`GrowthRate`](#Mesh.GrowthRate)Gets or sets the GrowthRate.[`GrowthRateSF`](#Mesh.GrowthRateSF)Gets or sets the GrowthRateSF.[`GrowthRateType`](#Mesh.GrowthRateType)Gets or sets the GrowthRateType.[`Hex20`](#Mesh.Hex20)Gets the Hex20.[`Hex8`](#Mesh.Hex8)Gets the Hex8.[`HoleRemovalTolerance`](#Mesh.HoleRemovalTolerance)Gets or sets the HoleRemovalTolerance.[`Images`](#Mesh.Images)Gets the list of associated images.[`InflationAlgorithm`](#Mesh.InflationAlgorithm)Gets or sets the InflationAlgorithm.[`InflationElementType`](#Mesh.InflationElementType)Gets or Sets the InflationElementType[`InflationOption`](#Mesh.InflationOption)Gets or sets the InflationOption.[`InitialSizeSeed`](#Mesh.InitialSizeSeed)Gets or sets the InitialSizeSeed.[`InternalObject`](#Mesh.InternalObject)Gets the internal object. For advanced usage only.[`Line2`](#Mesh.Line2)Gets the Line2.[`Line3`](#Mesh.Line3)Gets the Line3.[`Maximum`](#Mesh.Maximum)Gets the Maximum.[`MaximumAngle`](#Mesh.MaximumAngle)Gets or sets the MaximumAngle.[`MaximumHeightOverBase`](#Mesh.MaximumHeightOverBase)Gets or sets the MaximumHeightOverBase.[`MaximumLayers`](#Mesh.MaximumLayers)Gets or sets the MaximumLayers.[`MaximumSize`](#Mesh.MaximumSize)Gets or sets the MaximumSize.[`MaximumThickness`](#Mesh.MaximumThickness)Gets or sets the MaximumThickness.[`MeshBasedConnection`](#Mesh.MeshBasedConnection)Gets or sets the MeshBasedConnection.[`MeshMetric`](#Mesh.MeshMetric)Gets or sets the MeshMetric.[`MeshMorphing`](#Mesh.MeshMorphing)Gets or sets the MeshMorphing.[`Method`](#Mesh.Method)Gets or sets the Method.[`MidNodes`](#Mesh.MidNodes)Gets the MidNodes.[`MinimizeNumTriangles`](#Mesh.MinimizeNumTriangles)Gets or sets the TriangleReduction option for Batch Connections.[`Minimum`](#Mesh.Minimum)Gets the Minimum.[`MinimumEdgeLength`](#Mesh.MinimumEdgeLength)Gets the MinimumEdgeLength.[`MinimumSize`](#Mesh.MinimumSize)Gets or sets the MinimumSize.[`MultiConnectionSteps`](#Mesh.MultiConnectionSteps)Gets or sets the MultiConnectionSteps.[`NamedSelection`](#Mesh.NamedSelection)Gets or sets the NamedSelection.[`Nodes`](#Mesh.Nodes)Gets the Nodes.[`NumberOfCPUsForParallelPartMeshing`](#Mesh.NumberOfCPUsForParallelPartMeshing)Gets or sets the NumberOfCPUsForParallelPartMeshing.[`NumberOfRetries`](#Mesh.NumberOfRetries)Gets or sets the NumberOfRetries.[`NumberOfShellMeshQualityMetrics`](#Mesh.NumberOfShellMeshQualityMetrics)Gets the number of Mesh Quality Metrics[`OrientationNodes`](#Mesh.OrientationNodes)Gets the OrientationNodes.[`PhysicsPreference`](#Mesh.PhysicsPreference)Gets or sets the PhysicsPreference.[`PinchTolerance`](#Mesh.PinchTolerance)Gets or sets the PinchTolerance.[`Properties`](#Mesh.Properties)Gets the list of properties for this object.[`ProximityGapFactor`](#Mesh.ProximityGapFactor)Gets or sets the ProximityGapFactor.[`ProximityMinimumSize`](#Mesh.ProximityMinimumSize)Gets or sets the ProximityMinimumSize.[`ProximitySizeSources`](#Mesh.ProximitySizeSources)Gets or sets the ProximitySizeSources.[`Pyramid13`](#Mesh.Pyramid13)Gets the Pyramid13.[`Pyramid5`](#Mesh.Pyramid5)Gets the Pyramid5.[`Quad4`](#Mesh.Quad4)Gets the Quad4.[`Quad8`](#Mesh.Quad8)Gets the Quad8.[`QuadMesh`](#Mesh.QuadMesh)Gets or sets the QuadMesh.[`ReadOnly`](#Mesh.ReadOnly)Gets the ReadOnly.[`Relevance`](#Mesh.Relevance)Gets or sets the Relevance.[`RelevanceCenter`](#Mesh.RelevanceCenter)Gets or sets the RelevanceCenter.[`Resolution`](#Mesh.Resolution)Gets or sets the Resolution.[`RigidBodyBehavior`](#Mesh.RigidBodyBehavior)Gets or sets the BoundaryCondition.[`RigidBodyFaceMeshType`](#Mesh.RigidBodyFaceMeshType)Gets or sets the RigidBodyFaceMeshType.[`ShapeChecking`](#Mesh.ShapeChecking)Gets or sets the ShapeChecking.[`SharedNodes`](#Mesh.SharedNodes)Gets the SharedNodes.[`SheetLoopRemoval`](#Mesh.SheetLoopRemoval)Gets or sets the SheetLoopRemoval.[`ShellElements`](#Mesh.ShellElements)Gets the ShellElements.[`ShowDetailedStatistics`](#Mesh.ShowDetailedStatistics)Gets or sets the ShowDetailedStatistics.[`Smoothing`](#Mesh.Smoothing)Gets or sets the Smoothing.[`SmoothingIterations`](#Mesh.SmoothingIterations)Gets or sets the SmoothingIterations.[`SolidElements`](#Mesh.SolidElements)Gets the SolidElements.[`SolidShellElements`](#Mesh.SolidShellElements)Gets the SolidShellElements.[`SolverPreference`](#Mesh.SolverPreference)Gets or sets the SolverPreference.[`SpanAngleCenter`](#Mesh.SpanAngleCenter)Gets or sets the SpanAngleCenter.[`StandardDeviation`](#Mesh.StandardDeviation)Gets the StandardDeviation.[`StraightSidedElements`](#Mesh.StraightSidedElements)Gets or sets the StraightSidedElements.[`TargetCharacteristicLength`](#Mesh.TargetCharacteristicLength)Gets or sets the TargetCharacteristicLength.[`TargetExplicitAspectRatio`](#Mesh.TargetExplicitAspectRatio)Gets or sets the TargetExplicitAspectRatio.[`TargetQuality`](#Mesh.TargetQuality)Gets or sets the TargetQuality.[`TargetSkewness`](#Mesh.TargetSkewness)Gets or sets the TargetSkewness.[`Tet10`](#Mesh.Tet10)Gets the Tet10.[`Tet4`](#Mesh.Tet4)Gets the Tet4.[`TopologyChecking`](#Mesh.TopologyChecking)Gets or sets the TopologyChecking.[`TransitionOption`](#Mesh.TransitionOption)Gets or sets the TransitionOption.[`TransitionRatio`](#Mesh.TransitionRatio)Gets or sets the TransitionRatio.[`Tri3`](#Mesh.Tri3)Gets the Tri3.[`Tri6`](#Mesh.Tri6)Gets the Tri6.[`TriangleSurfaceMesher`](#Mesh.TriangleSurfaceMesher)Gets or sets the TriangleSurfaceMesher.[`UseAdaptiveSizing`](#Mesh.UseAdaptiveSizing)Gets or sets the UseAdaptiveSizing.[`UseAdvancedSizeFunction`](#Mesh.UseAdvancedSizeFunction)Gets or sets the UseAdvancedSizeFunction.[`UseAutomaticInflation`](#Mesh.UseAutomaticInflation)Gets or sets the UseAutomaticInflation.[`UseFixedSizeFunctionForSheets`](#Mesh.UseFixedSizeFunctionForSheets)Gets or sets the UseFixedSizeFunctionForSheets.[`UsePostSmoothing`](#Mesh.UsePostSmoothing)Gets or sets the UsePostSmoothing.[`UseSheetThicknessForPinch`](#Mesh.UseSheetThicknessForPinch)Gets or sets the UseSheetThicknessForPinch.[`ViewAdvancedOptions`](#Mesh.ViewAdvancedOptions)Gets or sets the ViewAdvancedOptions.[`VisibleProperties`](#Mesh.VisibleProperties)Gets the list of properties that are visible for this object.[`Wedge15`](#Mesh.Wedge15)Gets the Wedge15.[`Wedge6`](#Mesh.Wedge6)Gets the Wedge6.[`Worksheet`](#Mesh.Worksheet)Get the MeshControlWorksheet action.<a id="property-detail"></a>

## Property detail

<a id="Mesh.AspectRatio"></a>

### *property* Mesh.AspectRatio *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the AspectRatio.

<a id="Mesh.AutomaticMeshBasedDefeaturing"></a>

### *property* Mesh.AutomaticMeshBasedDefeaturing *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the AutomaticMeshBasedDefeaturing.

<a id="Mesh.Average"></a>

### *property* Mesh.Average *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Average.

<a id="Mesh.Beam3"></a>

### *property* Mesh.Beam3 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Beam3.

<a id="Mesh.Beam4"></a>

### *property* Mesh.Beam4 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Beam4.

<a id="Mesh.BeamElements"></a>

### *property* Mesh.BeamElements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the BeamElements.

<a id="Mesh.CaptureCurvature"></a>

### *property* Mesh.CaptureCurvature *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CaptureCurvature.

<a id="Mesh.CaptureProximity"></a>

### *property* Mesh.CaptureProximity *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CaptureProximity.

<a id="Mesh.CheckMeshQuality"></a>

### *property* Mesh.CheckMeshQuality *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CheckMeshQuality.

<a id="Mesh.Children"></a>

### *property* Mesh.Children *: List\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of children.

<a id="Mesh.CollisionAvoidance"></a>

### *property* Mesh.CollisionAvoidance *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CollisionAvoidance.

<a id="Mesh.Comments"></a>

### *property* Mesh.Comments *: Iterable\[[Ansys.ACT.Automation.Mechanical.Comment](../Comment.md#ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Comment)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated comments.

<a id="Mesh.ConnectionSize"></a>

### *property* Mesh.ConnectionSize *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ConnectionSize.

<a id="Mesh.ConnectionTolerance"></a>

### *property* Mesh.ConnectionTolerance *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ConnectionTolerance.

<a id="Mesh.ConnectionToleranceList"></a>

### *property* Mesh.ConnectionToleranceList *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ConnectionToleranceList.

<a id="Mesh.CoplanarAngleTol"></a>

### *property* Mesh.CoplanarAngleTol *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CoplanarAngleTol.

<a id="Mesh.CornerNodes"></a>

### *property* Mesh.CornerNodes *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the CornerNodes.

<a id="Mesh.CurrentConfiguration"></a>

### *property* Mesh.CurrentConfiguration *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Assembly Mesh’s current configuration Id.

<a id="Mesh.CurvatureNormalAngle"></a>

### *property* Mesh.CurvatureNormalAngle *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CurvatureNormalAngle.

<a id="Mesh.DataModelObjectCategory"></a>

### *property* Mesh.DataModelObjectCategory *: [Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory](../../../../Mechanical/DataModel/Enums/DataModelObjectCategory.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the current DataModelObject’s category.

<a id="Mesh.DefeatureTolerance"></a>

### *property* Mesh.DefeatureTolerance *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DefeatureTolerance.

<a id="Mesh.DisplayStyle"></a>

### *property* Mesh.DisplayStyle *: [Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle](../../../../Mechanical/DataModel/Enums/MeshDisplayStyle.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DisplayStyle.

<a id="Mesh.ElementOrder"></a>

### *property* Mesh.ElementOrder *: [Ansys.Mechanical.DataModel.Enums.ElementOrder](../../../../Mechanical/DataModel/Enums/ElementOrder.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.ElementOrder) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ElementOrder.

<a id="Mesh.ElementSize"></a>

### *property* Mesh.ElementSize *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ElementSize.

<a id="Mesh.Elements"></a>

### *property* Mesh.Elements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Elements.

<a id="Mesh.ExportFormat"></a>

### *property* Mesh.ExportFormat *: [Ansys.Mechanical.DataModel.Enums.FluentExportMeshType](../../../../Mechanical/DataModel/Enums/FluentExportMeshType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.FluentExportMeshType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ExportFormat.

<a id="Mesh.ExportUnit"></a>

### *property* Mesh.ExportUnit *: [Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit](../../../../Mechanical/DataModel/Enums/PolyflowExportUnit.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ExportUnit.

<a id="Mesh.ExtraRetriesForAssembly"></a>

### *property* Mesh.ExtraRetriesForAssembly *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ExtraRetriesForAssembly.

<a id="Mesh.Figures"></a>

### *property* Mesh.Figures *: Iterable\[[Ansys.ACT.Automation.Mechanical.Figure](../Figure.md#ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Figure)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated figures.

<a id="Mesh.FilletRatio"></a>

### *property* Mesh.FilletRatio *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the FilletRatio.

<a id="Mesh.FirstLayerHeight"></a>

### *property* Mesh.FirstLayerHeight *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the FirstLayerHeight.

<a id="Mesh.GasketElements"></a>

### *property* Mesh.GasketElements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the GasketElements.

<a id="Mesh.GeneratePinchOnRefresh"></a>

### *property* Mesh.GeneratePinchOnRefresh *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GeneratePinchOnRefresh.

<a id="Mesh.GlobalUseCustomTargetLimit"></a>

### *property* Mesh.GlobalUseCustomTargetLimit *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GlobalUseCustomTargetLimit.

<a id="Mesh.GrowthRate"></a>

### *property* Mesh.GrowthRate *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GrowthRate.

<a id="Mesh.GrowthRateSF"></a>

### *property* Mesh.GrowthRateSF *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GrowthRateSF.

<a id="Mesh.GrowthRateType"></a>

### *property* Mesh.GrowthRateType *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GrowthRateType.

<a id="Mesh.Hex20"></a>

### *property* Mesh.Hex20 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Hex20.

<a id="Mesh.Hex8"></a>

### *property* Mesh.Hex8 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Hex8.

<a id="Mesh.HoleRemovalTolerance"></a>

### *property* Mesh.HoleRemovalTolerance *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the HoleRemovalTolerance.

<a id="Mesh.Images"></a>

### *property* Mesh.Images *: Iterable\[[Ansys.ACT.Automation.Mechanical.Image](../Image.md#ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Image)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated images.

<a id="Mesh.InflationAlgorithm"></a>

### *property* Mesh.InflationAlgorithm *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the InflationAlgorithm.

<a id="Mesh.InflationElementType"></a>

### *property* Mesh.InflationElementType *: [Ansys.Mechanical.DataModel.Enums.MeshInflationElementType](../../../../Mechanical/DataModel/Enums/MeshInflationElementType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshInflationElementType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or Sets the InflationElementType

<a id="Mesh.InflationOption"></a>

### *property* Mesh.InflationOption *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the InflationOption.

<a id="Mesh.InitialSizeSeed"></a>

### *property* Mesh.InitialSizeSeed *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the InitialSizeSeed.

<a id="Mesh.InternalObject"></a>

### *property* Mesh.InternalObject *: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the internal object. For advanced usage only.

<a id="Mesh.Line2"></a>

### *property* Mesh.Line2 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Line2.

<a id="Mesh.Line3"></a>

### *property* Mesh.Line3 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Line3.

<a id="Mesh.Maximum"></a>

### *property* Mesh.Maximum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Maximum.

<a id="Mesh.MaximumAngle"></a>

### *property* Mesh.MaximumAngle *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MaximumAngle.

<a id="Mesh.MaximumHeightOverBase"></a>

### *property* Mesh.MaximumHeightOverBase *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MaximumHeightOverBase.

<a id="Mesh.MaximumLayers"></a>

### *property* Mesh.MaximumLayers *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MaximumLayers.

<a id="Mesh.MaximumSize"></a>

### *property* Mesh.MaximumSize *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MaximumSize.

<a id="Mesh.MaximumThickness"></a>

### *property* Mesh.MaximumThickness *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MaximumThickness.

<a id="Mesh.MeshBasedConnection"></a>

### *property* Mesh.MeshBasedConnection *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MeshBasedConnection.

<a id="Mesh.MeshMetric"></a>

### *property* Mesh.MeshMetric *: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MeshMetric.

<a id="Mesh.MeshMorphing"></a>

### *property* Mesh.MeshMorphing *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MeshMorphing.

<a id="Mesh.Method"></a>

### *property* Mesh.Method *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Method.

<a id="Mesh.MidNodes"></a>

### *property* Mesh.MidNodes *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MidNodes.

<a id="Mesh.MinimizeNumTriangles"></a>

### *property* Mesh.MinimizeNumTriangles *: [Ansys.Mechanical.DataModel.Enums.TriangleReduction](../../../../Mechanical/DataModel/Enums/TriangleReduction.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.TriangleReduction) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TriangleReduction option for Batch Connections.

<a id="Mesh.Minimum"></a>

### *property* Mesh.Minimum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Minimum.

<a id="Mesh.MinimumEdgeLength"></a>

### *property* Mesh.MinimumEdgeLength *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumEdgeLength.

<a id="Mesh.MinimumSize"></a>

### *property* Mesh.MinimumSize *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MinimumSize.

<a id="Mesh.MultiConnectionSteps"></a>

### *property* Mesh.MultiConnectionSteps *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the MultiConnectionSteps.

<a id="Mesh.NamedSelection"></a>

### *property* Mesh.NamedSelection *: [Ansys.ACT.Automation.Mechanical.NamedSelection](../NamedSelection.md#ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.NamedSelection) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NamedSelection.

<a id="Mesh.Nodes"></a>

### *property* Mesh.Nodes *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Nodes.

<a id="Mesh.NumberOfCPUsForParallelPartMeshing"></a>

### *property* Mesh.NumberOfCPUsForParallelPartMeshing *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NumberOfCPUsForParallelPartMeshing.

<a id="Mesh.NumberOfRetries"></a>

### *property* Mesh.NumberOfRetries *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NumberOfRetries.

<a id="Mesh.NumberOfShellMeshQualityMetrics"></a>

### *property* Mesh.NumberOfShellMeshQualityMetrics *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the number of Mesh Quality Metrics

<a id="Mesh.OrientationNodes"></a>

### *property* Mesh.OrientationNodes *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the OrientationNodes.

<a id="Mesh.PhysicsPreference"></a>

### *property* Mesh.PhysicsPreference *: [Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType](../../../../Mechanical/DataModel/Enums/MeshPhysicsPreferenceType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the PhysicsPreference.

<a id="Mesh.PinchTolerance"></a>

### *property* Mesh.PinchTolerance *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the PinchTolerance.

<a id="Mesh.Properties"></a>

### *property* Mesh.Properties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties for this object.

<a id="Mesh.ProximityGapFactor"></a>

### *property* Mesh.ProximityGapFactor *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ProximityGapFactor.

<a id="Mesh.ProximityMinimumSize"></a>

### *property* Mesh.ProximityMinimumSize *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ProximityMinimumSize.

<a id="Mesh.ProximitySizeSources"></a>

### *property* Mesh.ProximitySizeSources *: [Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType](../../../../Mechanical/DataModel/Enums/ProximitySFSourcesType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ProximitySizeSources.

<a id="Mesh.Pyramid13"></a>

### *property* Mesh.Pyramid13 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Pyramid13.

<a id="Mesh.Pyramid5"></a>

### *property* Mesh.Pyramid5 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Pyramid5.

<a id="Mesh.Quad4"></a>

### *property* Mesh.Quad4 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Quad4.

<a id="Mesh.Quad8"></a>

### *property* Mesh.Quad8 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Quad8.

<a id="Mesh.QuadMesh"></a>

### *property* Mesh.QuadMesh *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the QuadMesh.

<a id="Mesh.ReadOnly"></a>

### *property* Mesh.ReadOnly *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the ReadOnly.

<a id="Mesh.Relevance"></a>

### *property* Mesh.Relevance *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Relevance.

<a id="Mesh.RelevanceCenter"></a>

### *property* Mesh.RelevanceCenter *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the RelevanceCenter.

<a id="Mesh.Resolution"></a>

### *property* Mesh.Resolution *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Resolution.

<a id="Mesh.RigidBodyBehavior"></a>

### *property* Mesh.RigidBodyBehavior *: [Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType](../../../../Mechanical/DataModel/Enums/MeshControlGroupRigidBodyBehaviorType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the BoundaryCondition.

<a id="Mesh.RigidBodyFaceMeshType"></a>

### *property* Mesh.RigidBodyFaceMeshType *: [Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType](../../../../Mechanical/DataModel/Enums/MeshControlGroupRigidBodyFaceMeshType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the RigidBodyFaceMeshType.

<a id="Mesh.ShapeChecking"></a>

### *property* Mesh.ShapeChecking *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ShapeChecking.

<a id="Mesh.SharedNodes"></a>

### *property* Mesh.SharedNodes *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the SharedNodes.

<a id="Mesh.SheetLoopRemoval"></a>

### *property* Mesh.SheetLoopRemoval *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SheetLoopRemoval.

<a id="Mesh.ShellElements"></a>

### *property* Mesh.ShellElements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the ShellElements.

<a id="Mesh.ShowDetailedStatistics"></a>

### *property* Mesh.ShowDetailedStatistics *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ShowDetailedStatistics.

<a id="Mesh.Smoothing"></a>

### *property* Mesh.Smoothing *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Smoothing.

<a id="Mesh.SmoothingIterations"></a>

### *property* Mesh.SmoothingIterations *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SmoothingIterations.

<a id="Mesh.SolidElements"></a>

### *property* Mesh.SolidElements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the SolidElements.

<a id="Mesh.SolidShellElements"></a>

### *property* Mesh.SolidShellElements *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the SolidShellElements.

<a id="Mesh.SolverPreference"></a>

### *property* Mesh.SolverPreference *: [Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType](../../../../Mechanical/DataModel/Enums/MeshSolverPreferenceType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SolverPreference.

<a id="Mesh.SpanAngleCenter"></a>

### *property* Mesh.SpanAngleCenter *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SpanAngleCenter.

<a id="Mesh.StandardDeviation"></a>

### *property* Mesh.StandardDeviation *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the StandardDeviation.

<a id="Mesh.StraightSidedElements"></a>

### *property* Mesh.StraightSidedElements *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the StraightSidedElements.

<a id="Mesh.TargetCharacteristicLength"></a>

### *property* Mesh.TargetCharacteristicLength *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TargetCharacteristicLength.

<a id="Mesh.TargetExplicitAspectRatio"></a>

### *property* Mesh.TargetExplicitAspectRatio *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TargetExplicitAspectRatio.

<a id="Mesh.TargetQuality"></a>

### *property* Mesh.TargetQuality *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TargetQuality.

<a id="Mesh.TargetSkewness"></a>

### *property* Mesh.TargetSkewness *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TargetSkewness.

<a id="Mesh.Tet10"></a>

### *property* Mesh.Tet10 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Tet10.

<a id="Mesh.Tet4"></a>

### *property* Mesh.Tet4 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Tet4.

<a id="Mesh.TopologyChecking"></a>

### *property* Mesh.TopologyChecking *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TopologyChecking.

<a id="Mesh.TransitionOption"></a>

### *property* Mesh.TransitionOption *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TransitionOption.

<a id="Mesh.TransitionRatio"></a>

### *property* Mesh.TransitionRatio *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TransitionRatio.

<a id="Mesh.Tri3"></a>

### *property* Mesh.Tri3 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Tri3.

<a id="Mesh.Tri6"></a>

### *property* Mesh.Tri6 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Tri6.

<a id="Mesh.TriangleSurfaceMesher"></a>

### *property* Mesh.TriangleSurfaceMesher *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the TriangleSurfaceMesher.

<a id="Mesh.UseAdaptiveSizing"></a>

### *property* Mesh.UseAdaptiveSizing *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UseAdaptiveSizing.

<a id="Mesh.UseAdvancedSizeFunction"></a>

### *property* Mesh.UseAdvancedSizeFunction *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UseAdvancedSizeFunction.

<a id="Mesh.UseAutomaticInflation"></a>

### *property* Mesh.UseAutomaticInflation *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UseAutomaticInflation.

<a id="Mesh.UseFixedSizeFunctionForSheets"></a>

### *property* Mesh.UseFixedSizeFunctionForSheets *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UseFixedSizeFunctionForSheets.

<a id="Mesh.UsePostSmoothing"></a>

### *property* Mesh.UsePostSmoothing *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UsePostSmoothing.

<a id="Mesh.UseSheetThicknessForPinch"></a>

### *property* Mesh.UseSheetThicknessForPinch *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the UseSheetThicknessForPinch.

<a id="Mesh.ViewAdvancedOptions"></a>

### *property* Mesh.ViewAdvancedOptions *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ViewAdvancedOptions.

<a id="Mesh.VisibleProperties"></a>

### *property* Mesh.VisibleProperties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties that are visible for this object.

<a id="Mesh.Wedge15"></a>

### *property* Mesh.Wedge15 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Wedge15.

<a id="Mesh.Wedge6"></a>

### *property* Mesh.Wedge6 *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Wedge6.

<a id="Mesh.Worksheet"></a>

### *property* Mesh.Worksheet *: Ansys.ACT.Interfaces.Common.IWorksheet | [None](https://docs.python.org/3/library/constants.html#None)*

Get the MeshControlWorksheet action.

<a id="method-detail"></a>

## Method detail

<a id="Mesh.Activate"></a>

### Mesh.Activate()

Activate the current object.

<a id="Mesh.ActivateAllSolidSurfaceWorksheetRows"></a>

### Mesh.ActivateAllSolidSurfaceWorksheetRows()

ActivateAllSolidSurfaceWorksheetRows method.

<a id="Mesh.ActivateAllSurfaceWorksheetRows"></a>

### Mesh.ActivateAllSurfaceWorksheetRows()

ActivateAllSurfaceWorksheetRows method.

<a id="Mesh.ActivateAllVolumeWorksheetRows"></a>

### Mesh.ActivateAllVolumeWorksheetRows()

ActivateAllVolumeWorksheetRows method.

<a id="Mesh.AddAutomaticMethod"></a>

### Mesh.AddAutomaticMethod()

Creates a new AutomaticMethod

<a id="Mesh.AddComment"></a>

### Mesh.AddComment()

Creates a new child Comment.

<a id="Mesh.AddConnect"></a>

### Mesh.AddConnect()

Creates a new Connect Control

<a id="Mesh.AddContactMatchGroup"></a>

### Mesh.AddContactMatchGroup()

Add a new AddContactMatchGroup.

<a id="Mesh.AddContactSizing"></a>

### Mesh.AddContactSizing()

Creates a new ContactSizing

<a id="Mesh.AddDeviation"></a>

### Mesh.AddDeviation()

Creates a new SagControl

<a id="Mesh.AddDirectMorph"></a>

### Mesh.AddDirectMorph()

Add a new DirectMorph.

<a id="Mesh.AddFaceMeshing"></a>

### Mesh.AddFaceMeshing()

Creates a new FaceMeshing

<a id="Mesh.AddFeatureSuppress"></a>

### Mesh.AddFeatureSuppress()

Creates a new FeatureSuppress

<a id="Mesh.AddFigure"></a>

### Mesh.AddFigure()

Creates a new child Figure.

<a id="Mesh.AddGeometryFidelity"></a>

### Mesh.AddGeometryFidelity()

Creates a new GeometryFidelity

<a id="Mesh.AddImage"></a>

### Mesh.AddImage(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

```

<a id="Mesh.AddInflation"></a>

### Mesh.AddInflation()

Creates a new Inflation

<a id="Mesh.AddManualMeshConnection"></a>

### Mesh.AddManualMeshConnection()

Add a new ManualMeshConnection

<a id="Mesh.AddMatchControl"></a>

### Mesh.AddMatchControl()

Creates a new MatchControl

<a id="Mesh.AddMeshConnectionGroup"></a>

### Mesh.AddMeshConnectionGroup()

Add a new MeshConnectionGroup.

<a id="Mesh.AddMeshCopy"></a>

### Mesh.AddMeshCopy()

Creates a new MeshCopy

<a id="Mesh.AddNodeMerge"></a>

### Mesh.AddNodeMerge()

Add a new NodeMerge.

<a id="Mesh.AddNodeMergeGroup"></a>

### Mesh.AddNodeMergeGroup()

Add a new NodeMergeGroup.

<a id="Mesh.AddPinch"></a>

### Mesh.AddPinch()

Creates a new Pinch

<a id="Mesh.AddPullExtrude"></a>

### Mesh.AddPullExtrude()

Add a new Pull (Extrude).

<a id="Mesh.AddPullRevolve"></a>

### Mesh.AddPullRevolve()

Add a new Pull (Revolve).

<a id="Mesh.AddPullSurfaceCoating"></a>

### Mesh.AddPullSurfaceCoating()

Add a new Pull (Surface Coating)).

<a id="Mesh.AddRefinement"></a>

### Mesh.AddRefinement()

Creates a new Refinement

<a id="Mesh.AddRepairTopology"></a>

### Mesh.AddRepairTopology()

Creates a new RepairTopology

<a id="Mesh.AddSizing"></a>

### Mesh.AddSizing()

Creates a new Sizing

<a id="Mesh.AddWasher"></a>

### Mesh.AddWasher()

Creates a new SagControl

<a id="Mesh.AddWeld"></a>

### Mesh.AddWeld()

Creates a new WeldControl

<a id="Mesh.CleanPartOrBody"></a>

### Mesh.CleanPartOrBody(dataModelObjects: Iterable)

Clear generated data for parts and/or bodies provided.

<a id="Mesh.ClearGeneratedData"></a>

### Mesh.ClearGeneratedData()

Run the ClearGeneratedData action.

<a id="Mesh.CopyTo"></a>

### Mesh.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

<a id="Mesh.CreateMQSolidSurfaceElementsNamedSelection"></a>

### Mesh.CreateMQSolidSurfaceElementsNamedSelection(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), failCode: [int](https://docs.python.org/3/library/functions.html#int))

Create Mesh Quality SolidSurface Element Name Selection

<a id="Mesh.CreateMQSurfaceElementsNamedSelection"></a>

### Mesh.CreateMQSurfaceElementsNamedSelection(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), failCode: [int](https://docs.python.org/3/library/functions.html#int))

Create Mesh Quality Surface Element Named Selection

<a id="Mesh.CreateMQVolumeElementsNamedSelection"></a>

### Mesh.CreateMQVolumeElementsNamedSelection(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), failCode: [int](https://docs.python.org/3/library/functions.html#int))

Create Mesh Quality Volume Element Name Selection

<a id="Mesh.CreateParameter"></a>

### Mesh.CreateParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Creates a new parameter for a Property.

<a id="Mesh.CreatePinchControls"></a>

### Mesh.CreatePinchControls()

Run the CreatePinchControls action.

<a id="Mesh.DeactivateAllSolidSurfaceWorksheetRows"></a>

### Mesh.DeactivateAllSolidSurfaceWorksheetRows()

DeactivateAllSolidSurfaceWorksheetRows method.

<a id="Mesh.DeactivateAllSurfaceWorksheetRows"></a>

### Mesh.DeactivateAllSurfaceWorksheetRows()

DeactivateAllSurfaceWorksheetRows method.

<a id="Mesh.DeactivateAllVolumeWorksheetRows"></a>

### Mesh.DeactivateAllVolumeWorksheetRows()

DeactivateAllVolumeWorksheetRows method.

<a id="Mesh.Duplicate"></a>

### Mesh.Duplicate()

Creates a copy of the current DataModelObject.

<a id="Mesh.GenerateMesh"></a>

### Mesh.GenerateMesh()

Run the GenerateMesh action.

<a id="Mesh.GetActiveSurfaceMeshQuality"></a>

### Mesh.GetActiveSurfaceMeshQuality(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Active User Mesh Quality

<a id="Mesh.GetChildren"></a>

### Mesh.GetChildren(recurses: [bool](https://docs.python.org/3/library/functions.html#bool), children: List\[ChildrenType\])

Gets the list of children, filtered by type.

<a id="Mesh.GetIsShellTargetMetric"></a>

### Mesh.GetIsShellTargetMetric(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Shell Target Metric

<a id="Mesh.GetIsSolidSurfaceTargetMetric"></a>

### Mesh.GetIsSolidSurfaceTargetMetric(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get SolidSurface Target Metric

<a id="Mesh.GetIsSolidTargetMetric"></a>

### Mesh.GetIsSolidTargetMetric(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Solid Target Metric

<a id="Mesh.GetMeshMetricOptions"></a>

### Mesh.GetMeshMetricOptions(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

GetMeshMetricOptions method.

<a id="Mesh.GetParameter"></a>

### Mesh.GetParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Gets the parameter corresponding to the given property.

<a id="Mesh.GetSolidSurfaceMeshMetrics"></a>

### Mesh.GetSolidSurfaceMeshMetrics()

GetSolidSurfaceMeshMetrics method.

<a id="Mesh.GetSolidSurfaceMeshQualityAverageMetricValue"></a>

### Mesh.GetSolidSurfaceMeshQualityAverageMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Average Metric Value

<a id="Mesh.GetSolidSurfaceMeshQualityCountFailed"></a>

### Mesh.GetSolidSurfaceMeshQualityCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Count Failed

<a id="Mesh.GetSolidSurfaceMeshQualityErrorLimit"></a>

### Mesh.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Error Limit

<a id="Mesh.GetSolidSurfaceMeshQualityName"></a>

### Mesh.GetSolidSurfaceMeshQualityName(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Name

<a id="Mesh.GetSolidSurfaceMeshQualityPercentageFailed"></a>

### Mesh.GetSolidSurfaceMeshQualityPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Percentage Failed

<a id="Mesh.GetSolidSurfaceMeshQualityWarningCountFailed"></a>

### Mesh.GetSolidSurfaceMeshQualityWarningCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Count Failed

<a id="Mesh.GetSolidSurfaceMeshQualityWarningLimit"></a>

### Mesh.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Limit

<a id="Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed"></a>

### Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Percentage Failed

<a id="Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor"></a>

### Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Worst Metric BackgroundColor

<a id="Mesh.GetSolidSurfaceMeshQualityWorstMetricValue"></a>

### Mesh.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Worst Metric Value

<a id="Mesh.GetSurfaceMeshQualityAverageMetricValue"></a>

### Mesh.GetSurfaceMeshQualityAverageMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Average Metric Value

<a id="Mesh.GetSurfaceMeshQualityCountFailed"></a>

### Mesh.GetSurfaceMeshQualityCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Count Failed

<a id="Mesh.GetSurfaceMeshQualityErrorLimit"></a>

### Mesh.GetSurfaceMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get User Mesh Quality Error Limit

<a id="Mesh.GetSurfaceMeshQualityName"></a>

### Mesh.GetSurfaceMeshQualityName(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Name

<a id="Mesh.GetSurfaceMeshQualityPercentageFailed"></a>

### Mesh.GetSurfaceMeshQualityPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Percentage Failed

<a id="Mesh.GetSurfaceMeshQualityWarningCountFailed"></a>

### Mesh.GetSurfaceMeshQualityWarningCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Count Failed

<a id="Mesh.GetSurfaceMeshQualityWarningLimit"></a>

### Mesh.GetSurfaceMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get User Mesh Quality Warning Limit

<a id="Mesh.GetSurfaceMeshQualityWarningPercentageFailed"></a>

### Mesh.GetSurfaceMeshQualityWarningPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Percentage Failed

<a id="Mesh.GetSurfaceMeshQualityWorstMetricValue"></a>

### Mesh.GetSurfaceMeshQualityWorstMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Worst Metric Value

<a id="Mesh.GetVolumeMeshMetrics"></a>

### Mesh.GetVolumeMeshMetrics()

GetVolumeMeshMetrics method.

<a id="Mesh.GetVolumeMeshQualityAverageMetricValue"></a>

### Mesh.GetVolumeMeshQualityAverageMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Average Metric Value

<a id="Mesh.GetVolumeMeshQualityCountFailed"></a>

### Mesh.GetVolumeMeshQualityCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Count Failed

<a id="Mesh.GetVolumeMeshQualityErrorLimit"></a>

### Mesh.GetVolumeMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Error Limit

<a id="Mesh.GetVolumeMeshQualityName"></a>

### Mesh.GetVolumeMeshQualityName(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Name

<a id="Mesh.GetVolumeMeshQualityPercentageFailed"></a>

### Mesh.GetVolumeMeshQualityPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Percentage Failed

<a id="Mesh.GetVolumeMeshQualityWarningCountFailed"></a>

### Mesh.GetVolumeMeshQualityWarningCountFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Count Failed

<a id="Mesh.GetVolumeMeshQualityWarningLimit"></a>

### Mesh.GetVolumeMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Limit

<a id="Mesh.GetVolumeMeshQualityWarningPercentageFailed"></a>

### Mesh.GetVolumeMeshQualityWarningPercentageFailed(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Warning Percentage Failed

<a id="Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor"></a>

### Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Worst Metric BackgroundColor

<a id="Mesh.GetVolumeMeshQualityWorstMetricValue"></a>

### Mesh.GetVolumeMeshQualityWorstMetricValue(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType))

Get Mesh Quality Worst Metric Value

<a id="Mesh.GroupAllSimilarChildren"></a>

### Mesh.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

<a id="Mesh.GroupSimilarObjects"></a>

### Mesh.GroupSimilarObjects()

Run the GroupSimilarObjects action.

<a id="Mesh.IsMeshMetricVisible"></a>

### Mesh.IsMeshMetricVisible(index: [int](https://docs.python.org/3/library/functions.html#int))

IsMeshMetricVisible method.

<a id="Mesh.LoadMQWorksheetFile"></a>

### Mesh.LoadMQWorksheetFile(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

LoadMQWorksheetFile method.

<a id="Mesh.PinchControlGeomtry"></a>

### Mesh.PinchControlGeomtry(geomType: [Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType](../../../../Mechanical/DataModel/Enums/MeshControlPinchGeomtryType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType))

Set the geometry type for the Pinch Control.

<a id="Mesh.PreviewInflation"></a>

### Mesh.PreviewInflation()

Run the PreviewInflation action.

<a id="Mesh.PreviewMeshOnAllWelds"></a>

### Mesh.PreviewMeshOnAllWelds()

Preview model mesh on all weld controls of the Mesh.

<a id="Mesh.PreviewMeshOnWeld"></a>

### Mesh.PreviewMeshOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject)

Preview model mesh on one weld control provided.

<a id="Mesh.PreviewMeshOnWeldWorksheet"></a>

### Mesh.PreviewMeshOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: Iterable\[[int](https://docs.python.org/3/library/functions.html#int)\])

PreviewMeshOnWeldWorksheet method.

<a id="Mesh.PreviewMeshOnWelds"></a>

### Mesh.PreviewMeshOnWelds(dataModelObjects: Iterable\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\])

PreviewMeshOnWelds method.

<a id="Mesh.PreviewSurfaceMesh"></a>

### Mesh.PreviewSurfaceMesh()

Run the PreviewSurfaceMesh action.

<a id="Mesh.PreviewWelds"></a>

### Mesh.PreviewWelds()

Preview Welds.

<a id="Mesh.PropertyByAPIName"></a>

### Mesh.PropertyByAPIName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

```

<a id="Mesh.PropertyByName"></a>

### Mesh.PropertyByName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

Get a property by its unique name.

<a id="Mesh.RemoveParameter"></a>

### Mesh.RemoveParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Removes the parameter from the parameter set corresponding to the given property.

<a id="Mesh.SaveMQWorksheetFile"></a>

### Mesh.SaveMQWorksheetFile(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

SaveMQWorksheetFile method.

<a id="Mesh.SetActiveSolidSurfaceMeshQuality"></a>

### Mesh.SetActiveSolidSurfaceMeshQuality(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), activeMetric: [float](https://docs.python.org/3/library/functions.html#float))

Set Active Mesh Quality

<a id="Mesh.SetActiveSurfaceMeshQuality"></a>

### Mesh.SetActiveSurfaceMeshQuality(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), activeMetric: [float](https://docs.python.org/3/library/functions.html#float))

Set Active Mesh Quality

<a id="Mesh.SetActiveVolumeMeshQuality"></a>

### Mesh.SetActiveVolumeMeshQuality(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), activeMetric: [float](https://docs.python.org/3/library/functions.html#float))

Set Active Mesh Quality

<a id="Mesh.SetMeshMetricOptions"></a>

### Mesh.SetMeshMetricOptions(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), prefValue: Ansys.Mechanical.DataModel.Enums.MetricPreference)

SetMeshMetricOptions method.

<a id="Mesh.SetSolidMeshMetricLimits"></a>

### Mesh.SetSolidMeshMetricLimits(metricType: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity)

SetSolidMeshMetricLimits method.

<a id="Mesh.SetSolidSurfaceMeshMetricLimits"></a>

### Mesh.SetSolidSurfaceMeshMetricLimits(metricType: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity)

SetSolidSurfaceMeshMetricLimits method.

<a id="Mesh.SetSolidSurfaceMeshQualityErrorLimit"></a>

### Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), errorLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Error Limit

<a id="Mesh.SetSolidSurfaceMeshQualityWarningLimit"></a>

### Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Warning Limit

<a id="Mesh.SetSurfaceMeshMetricLimits"></a>

### Mesh.SetSurfaceMeshMetricLimits(metricType: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity)

SetSurfaceMeshMetricLimits method.

<a id="Mesh.SetSurfaceMeshQualityErrorLimit"></a>

### Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), errorLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Error Level

<a id="Mesh.SetSurfaceMeshQualityWarningLimit"></a>

### Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Warning Limit

<a id="Mesh.SetVolumeMeshQualityErrorLimit"></a>

### Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), errorLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Error Limit

<a id="Mesh.SetVolumeMeshQualityWarningLimit"></a>

### Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: [Ansys.Mechanical.DataModel.Enums.MeshMetricType](../../../../Mechanical/DataModel/Enums/MeshMetricType.md#ansys.mechanical.stubs.v241.Ansys.Mechanical.DataModel.Enums.MeshMetricType), warningLevel: [float](https://docs.python.org/3/library/functions.html#float))

Set Mesh Quality Warning Limit

<a id="Mesh.ShowFeatureSuppressibleFaces"></a>

### Mesh.ShowFeatureSuppressibleFaces()

Run the ShowFeatureSuppressibleFaces action.

<a id="Mesh.ShowMappableBodies"></a>

### Mesh.ShowMappableBodies()

Run the ShowMappableBodies action.

<a id="Mesh.ShowOverlappingFaces"></a>

### Mesh.ShowOverlappingFaces()

Run the ShowOverlappingFaces action.

<a id="Mesh.ShowSweepableBodies"></a>

### Mesh.ShowSweepableBodies()

Run the ShowSweepableBodies action.

<a id="Mesh.ShowUnconnectedFacesNearEdges"></a>

### Mesh.ShowUnconnectedFacesNearEdges()

Run the ShowUnconnectedFreeEdges action.

<a id="Mesh.Update"></a>

### Mesh.Update()

Run the Update action.