## On this page

  

 

 # `MullinsMaximumPreviousStrainEnergy`

 Last update: 16.07.2025 

<a id="ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.DamageResults.MullinsMaximumPreviousStrainEnergy"></a>

#### *class* Ansys.ACT.Automation.Mechanical.Results.DamageResults.MullinsMaximumPreviousStrainEnergy

Bases: [`object`](https://docs.python.org/3/library/functions.html#object)

Defines a MullinsMaximumPreviousStrainEnergy.

<a id="overview"></a>

## Overview

### Methods

NameDescription[`Activate`](#MullinsMaximumPreviousStrainEnergy.Activate)Activate the current object.[`AddAlert`](#MullinsMaximumPreviousStrainEnergy.AddAlert)Creates a new Alert[`AddComment`](#MullinsMaximumPreviousStrainEnergy.AddComment)Creates a new child Comment.[`AddConvergence`](#MullinsMaximumPreviousStrainEnergy.AddConvergence)Creates a new Convergence[`AddFigure`](#MullinsMaximumPreviousStrainEnergy.AddFigure)Creates a new child Figure.[`AddImage`](#MullinsMaximumPreviousStrainEnergy.AddImage)Creates a new child Image.[`ClearGeneratedData`](#MullinsMaximumPreviousStrainEnergy.ClearGeneratedData)Run the ClearGeneratedData action.[`CopyTo`](#MullinsMaximumPreviousStrainEnergy.CopyTo)Copies all visible properties from this object to another.[`CreateParameter`](#MullinsMaximumPreviousStrainEnergy.CreateParameter)CreateParameter method.[`CreateResultsAtAllSets`](#MullinsMaximumPreviousStrainEnergy.CreateResultsAtAllSets)Creates results at all sets for results under a solution.[`Delete`](#MullinsMaximumPreviousStrainEnergy.Delete)Run the Delete action.[`Duplicate`](#MullinsMaximumPreviousStrainEnergy.Duplicate)Creates a copy of the current DataModelObject.[`DuplicateWithoutResults`](#MullinsMaximumPreviousStrainEnergy.DuplicateWithoutResults)Run the DuplicateWithoutResults action.[`EvaluateAllResults`](#MullinsMaximumPreviousStrainEnergy.EvaluateAllResults)Run the EvaluateAllResults action.[`ExportAnimation`](#MullinsMaximumPreviousStrainEnergy.ExportAnimation)Run the ExportAnimation action.[`ExportToTextFile`](#MullinsMaximumPreviousStrainEnergy.ExportToTextFile)Run the ExportToTextFile action.[`FetchRemoteResults`](#MullinsMaximumPreviousStrainEnergy.FetchRemoteResults)Run the FetchRemoteResult action.[`GetChildren`](#MullinsMaximumPreviousStrainEnergy.GetChildren)Gets the list of children, filtered by type.[`GetParameter`](#MullinsMaximumPreviousStrainEnergy.GetParameter)Gets the parameter corresponding to the given property.[`GroupAllSimilarChildren`](#MullinsMaximumPreviousStrainEnergy.GroupAllSimilarChildren)Run the GroupAllSimilarChildren action.[`GroupSimilarObjects`](#MullinsMaximumPreviousStrainEnergy.GroupSimilarObjects)Run the GroupSimilarObjects action.[`PromoteToNamedSelection`](#MullinsMaximumPreviousStrainEnergy.PromoteToNamedSelection)Run the PromoteToNamedSelection action.[`PropertyByAPIName`](#MullinsMaximumPreviousStrainEnergy.PropertyByAPIName)Get a property by its API name.[`PropertyByName`](#MullinsMaximumPreviousStrainEnergy.PropertyByName)Get a property by its unique name.[`RemoveParameter`](#MullinsMaximumPreviousStrainEnergy.RemoveParameter)Removes the parameter from the parameter set corresponding to the given property.[`RenameBasedOnDefinition`](#MullinsMaximumPreviousStrainEnergy.RenameBasedOnDefinition)Run the RenameBasedOnDefinition action.### Properties

NameDescription[`Average`](#MullinsMaximumPreviousStrainEnergy.Average)Gets the Average.[`By`](#MullinsMaximumPreviousStrainEnergy.By)Gets or sets the By.[`CalculateTimeHistory`](#MullinsMaximumPreviousStrainEnergy.CalculateTimeHistory)Gets or sets the CalculateTimeHistory.[`Children`](#MullinsMaximumPreviousStrainEnergy.Children)Gets the list of children.[`CombinationNumber`](#MullinsMaximumPreviousStrainEnergy.CombinationNumber)Gets or sets the Combination Number for a Solution Combination result.[`Comments`](#MullinsMaximumPreviousStrainEnergy.Comments)Gets the list of associated comments.[`CoordinateSystem`](#MullinsMaximumPreviousStrainEnergy.CoordinateSystem)Gets or sets the Coordinate System.[`CrackFrontNumber`](#MullinsMaximumPreviousStrainEnergy.CrackFrontNumber)Gets or sets the CrackFrontNumber.[`DamageResultType`](#MullinsMaximumPreviousStrainEnergy.DamageResultType)Gets the DamageResultType.[`DataModelObjectCategory`](#MullinsMaximumPreviousStrainEnergy.DataModelObjectCategory)Gets the current DataModelObject’s category.[`DisplayOption`](#MullinsMaximumPreviousStrainEnergy.DisplayOption)Gets or sets the DisplayOption.[`DisplayTime`](#MullinsMaximumPreviousStrainEnergy.DisplayTime)Gets or sets the DisplayTime.[`DpfEvaluation`](#MullinsMaximumPreviousStrainEnergy.DpfEvaluation)Gets or sets the DpfEvaluation.[`Figures`](#MullinsMaximumPreviousStrainEnergy.Figures)Gets the list of associated figures.[`GlobalIDs`](#MullinsMaximumPreviousStrainEnergy.GlobalIDs)Gets or sets the GlobalIDs.[`GraphControlsXAxis`](#MullinsMaximumPreviousStrainEnergy.GraphControlsXAxis)Gets or sets the GraphControlsXAxis.[`Identifier`](#MullinsMaximumPreviousStrainEnergy.Identifier)Gets or sets the Identifier.[`Images`](#MullinsMaximumPreviousStrainEnergy.Images)Gets the list of associated images.[`InternalObject`](#MullinsMaximumPreviousStrainEnergy.InternalObject)Gets the internal object. For advanced usage only.[`IsSolved`](#MullinsMaximumPreviousStrainEnergy.IsSolved)Gets the IsSolved.[`ItemType`](#MullinsMaximumPreviousStrainEnergy.ItemType)Gets or sets the ItemType.[`IterationNumber`](#MullinsMaximumPreviousStrainEnergy.IterationNumber)Gets the IterationNumber.[`LoadStep`](#MullinsMaximumPreviousStrainEnergy.LoadStep)Gets the LoadStep.[`LoadStepForMaximumOfMaximumValues`](#MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMaximumValues)Get the Load Step for the maximum of maximum values.[`LoadStepForMaximumOfMinimumValues`](#MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMinimumValues)Get the Load Step for the maximum of minimum values.[`LoadStepForMinimumOfMaximumValues`](#MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMaximumValues)Get the Load Step for the minimum of maximum values.[`LoadStepForMinimumOfMinimumValues`](#MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMinimumValues)Get the Load Step for the minimum of minimum values.[`LoadStepNumber`](#MullinsMaximumPreviousStrainEnergy.LoadStepNumber)Gets or sets the LoadStepNumber.[`Location`](#MullinsMaximumPreviousStrainEnergy.Location)Gets or sets the Location.[`Maximum`](#MullinsMaximumPreviousStrainEnergy.Maximum)Gets the Maximum.[`MaximumOccursOn`](#MullinsMaximumPreviousStrainEnergy.MaximumOccursOn)Gets the MaximumOccursOn.[`MaximumOfMaximumOverTime`](#MullinsMaximumPreviousStrainEnergy.MaximumOfMaximumOverTime)Gets the MaximumOfMaximumOverTime.[`MaximumOfMinimumOverTime`](#MullinsMaximumPreviousStrainEnergy.MaximumOfMinimumOverTime)Gets the MaximumOfMinimumOverTime.[`Minimum`](#MullinsMaximumPreviousStrainEnergy.Minimum)Gets the Minimum.[`MinimumOccursOn`](#MullinsMaximumPreviousStrainEnergy.MinimumOccursOn)Gets the MinimumOccursOn.[`MinimumOfMaximumOverTime`](#MullinsMaximumPreviousStrainEnergy.MinimumOfMaximumOverTime)Gets the MinimumOfMaximumOverTime.[`MinimumOfMinimumOverTime`](#MullinsMaximumPreviousStrainEnergy.MinimumOfMinimumOverTime)Gets the MinimumOfMinimumOverTime.[`Mode`](#MullinsMaximumPreviousStrainEnergy.Mode)Gets or sets the Mode.[`NamedSelections`](#MullinsMaximumPreviousStrainEnergy.NamedSelections)Gets or sets the NamedSelections.[`Path`](#MullinsMaximumPreviousStrainEnergy.Path)Path property.[`Plies`](#MullinsMaximumPreviousStrainEnergy.Plies)Plies property.[`PlotData`](#MullinsMaximumPreviousStrainEnergy.PlotData)Gets the result table.[`Ply`](#MullinsMaximumPreviousStrainEnergy.Ply)Gets or sets the Ply selection.[`Properties`](#MullinsMaximumPreviousStrainEnergy.Properties)Gets the list of properties for this object.[`ScopingMethod`](#MullinsMaximumPreviousStrainEnergy.ScopingMethod)Gets or sets the ScopingMethod.[`SetNumber`](#MullinsMaximumPreviousStrainEnergy.SetNumber)Gets or sets the Set Number.[`SolutionCombinationDriver`](#MullinsMaximumPreviousStrainEnergy.SolutionCombinationDriver)Gets or sets the SolutionCombinationDriver.[`SolverComponentIDs`](#MullinsMaximumPreviousStrainEnergy.SolverComponentIDs)Gets or sets the SolverComponentIDs.[`Substep`](#MullinsMaximumPreviousStrainEnergy.Substep)Gets the Substep.[`Suppressed`](#MullinsMaximumPreviousStrainEnergy.Suppressed)Gets or sets the Suppressed.[`Surface`](#MullinsMaximumPreviousStrainEnergy.Surface)Surface property.[`SurfaceCoating`](#MullinsMaximumPreviousStrainEnergy.SurfaceCoating)SurfaceCoating property.[`Time`](#MullinsMaximumPreviousStrainEnergy.Time)Gets the Time.[`TimeForMaximumOfMaximumValues`](#MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMaximumValues)Get the Time for the maximum of maximum values.[`TimeForMaximumOfMinimumValues`](#MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMinimumValues)Get the Time for the maximum of minimum values.[`TimeForMinimumOfMaximumValues`](#MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMaximumValues)Get the Time for the minimum of maximum values.[`TimeForMinimumOfMinimumValues`](#MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMinimumValues)Get the Time for the minimum of minimum values.[`VisibleProperties`](#MullinsMaximumPreviousStrainEnergy.VisibleProperties)Gets the list of properties that are visible for this object.[`WaterfallShowTextOnMosaic`](#MullinsMaximumPreviousStrainEnergy.WaterfallShowTextOnMosaic)Gets or sets the Waterfall Mosaic Text Property.<a id="property-detail"></a>

## Property detail

<a id="MullinsMaximumPreviousStrainEnergy.Average"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Average *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Average.

<a id="MullinsMaximumPreviousStrainEnergy.By"></a>

### *property* MullinsMaximumPreviousStrainEnergy.By *: [Ansys.Mechanical.DataModel.Enums.SetDriverStyle](../../../../../Mechanical/DataModel/Enums/SetDriverStyle.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.SetDriverStyle) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the By.

<a id="MullinsMaximumPreviousStrainEnergy.CalculateTimeHistory"></a>

### *property* MullinsMaximumPreviousStrainEnergy.CalculateTimeHistory *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CalculateTimeHistory.

<a id="MullinsMaximumPreviousStrainEnergy.Children"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Children *: List\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of children.

<a id="MullinsMaximumPreviousStrainEnergy.CombinationNumber"></a>

### *property* MullinsMaximumPreviousStrainEnergy.CombinationNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Combination Number for a Solution Combination result.

<a id="MullinsMaximumPreviousStrainEnergy.Comments"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Comments *: Iterable\[[Ansys.ACT.Automation.Mechanical.Comment](../../Comment.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Comment)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated comments.

<a id="MullinsMaximumPreviousStrainEnergy.CoordinateSystem"></a>

### *property* MullinsMaximumPreviousStrainEnergy.CoordinateSystem *: [Ansys.ACT.Automation.Mechanical.CoordinateSystem](../../CoordinateSystem.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.CoordinateSystem) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

<a id="MullinsMaximumPreviousStrainEnergy.CrackFrontNumber"></a>

### *property* MullinsMaximumPreviousStrainEnergy.CrackFrontNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CrackFrontNumber.

<a id="MullinsMaximumPreviousStrainEnergy.DamageResultType"></a>

### *property* MullinsMaximumPreviousStrainEnergy.DamageResultType *: [Ansys.Mechanical.DataModel.Enums.DamageResultType](../../../../../Mechanical/DataModel/Enums/DamageResultType.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.DamageResultType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the DamageResultType.

<a id="MullinsMaximumPreviousStrainEnergy.DataModelObjectCategory"></a>

### *property* MullinsMaximumPreviousStrainEnergy.DataModelObjectCategory *: [Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory](../../../../../Mechanical/DataModel/Enums/DataModelObjectCategory.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the current DataModelObject’s category.

<a id="MullinsMaximumPreviousStrainEnergy.DisplayOption"></a>

### *property* MullinsMaximumPreviousStrainEnergy.DisplayOption *: [Ansys.Mechanical.DataModel.Enums.ResultAveragingType](../../../../../Mechanical/DataModel/Enums/ResultAveragingType.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.ResultAveragingType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DisplayOption.

<a id="MullinsMaximumPreviousStrainEnergy.DisplayTime"></a>

### *property* MullinsMaximumPreviousStrainEnergy.DisplayTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DisplayTime.

<a id="MullinsMaximumPreviousStrainEnergy.DpfEvaluation"></a>

### *property* MullinsMaximumPreviousStrainEnergy.DpfEvaluation *: [Ansys.Mechanical.DataModel.Enums.DpfEvaluationType](../../../../../Mechanical/DataModel/Enums/DpfEvaluationType.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.DpfEvaluationType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DpfEvaluation.

<a id="MullinsMaximumPreviousStrainEnergy.Figures"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Figures *: Iterable\[[Ansys.ACT.Automation.Mechanical.Figure](../../Figure.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Figure)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated figures.

<a id="MullinsMaximumPreviousStrainEnergy.GlobalIDs"></a>

### *property* MullinsMaximumPreviousStrainEnergy.GlobalIDs *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GlobalIDs.

<a id="MullinsMaximumPreviousStrainEnergy.GraphControlsXAxis"></a>

### *property* MullinsMaximumPreviousStrainEnergy.GraphControlsXAxis *: [Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis](../../../../../Mechanical/DataModel/Enums/GraphControlsXAxis.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GraphControlsXAxis.

<a id="MullinsMaximumPreviousStrainEnergy.Identifier"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Identifier *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Identifier.

<a id="MullinsMaximumPreviousStrainEnergy.Images"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Images *: Iterable\[[Ansys.ACT.Automation.Mechanical.Image](../../Image.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Image)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated images.

<a id="MullinsMaximumPreviousStrainEnergy.InternalObject"></a>

### *property* MullinsMaximumPreviousStrainEnergy.InternalObject *: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the internal object. For advanced usage only.

<a id="MullinsMaximumPreviousStrainEnergy.IsSolved"></a>

### *property* MullinsMaximumPreviousStrainEnergy.IsSolved *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the IsSolved.

<a id="MullinsMaximumPreviousStrainEnergy.ItemType"></a>

### *property* MullinsMaximumPreviousStrainEnergy.ItemType *: [Ansys.Mechanical.DataModel.Enums.ResultFileItemType](../../../../../Mechanical/DataModel/Enums/ResultFileItemType.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.ResultFileItemType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ItemType.

<a id="MullinsMaximumPreviousStrainEnergy.IterationNumber"></a>

### *property* MullinsMaximumPreviousStrainEnergy.IterationNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the IterationNumber.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStep"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStep *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the LoadStep.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMaximumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMaximumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the maximum of maximum values.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMinimumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStepForMaximumOfMinimumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the maximum of minimum values.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMaximumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMaximumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the minimum of maximum values.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMinimumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStepForMinimumOfMinimumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the minimum of minimum values.

<a id="MullinsMaximumPreviousStrainEnergy.LoadStepNumber"></a>

### *property* MullinsMaximumPreviousStrainEnergy.LoadStepNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the LoadStepNumber.

<a id="MullinsMaximumPreviousStrainEnergy.Location"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Location *: Ansys.ACT.Interfaces.Common.ISelectionInfo | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Location.

<a id="MullinsMaximumPreviousStrainEnergy.Maximum"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Maximum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Maximum.

<a id="MullinsMaximumPreviousStrainEnergy.MaximumOccursOn"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MaximumOccursOn *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOccursOn.

<a id="MullinsMaximumPreviousStrainEnergy.MaximumOfMaximumOverTime"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MaximumOfMaximumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOfMaximumOverTime.

<a id="MullinsMaximumPreviousStrainEnergy.MaximumOfMinimumOverTime"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MaximumOfMinimumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOfMinimumOverTime.

<a id="MullinsMaximumPreviousStrainEnergy.Minimum"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Minimum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Minimum.

<a id="MullinsMaximumPreviousStrainEnergy.MinimumOccursOn"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MinimumOccursOn *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOccursOn.

<a id="MullinsMaximumPreviousStrainEnergy.MinimumOfMaximumOverTime"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MinimumOfMaximumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOfMaximumOverTime.

<a id="MullinsMaximumPreviousStrainEnergy.MinimumOfMinimumOverTime"></a>

### *property* MullinsMaximumPreviousStrainEnergy.MinimumOfMinimumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOfMinimumOverTime.

<a id="MullinsMaximumPreviousStrainEnergy.Mode"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Mode *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Mode.

<a id="MullinsMaximumPreviousStrainEnergy.NamedSelections"></a>

### *property* MullinsMaximumPreviousStrainEnergy.NamedSelections *: Iterable\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NamedSelections.

<a id="MullinsMaximumPreviousStrainEnergy.Path"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Path *: [Ansys.ACT.Automation.Mechanical.Path](../../Path.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Path) | [None](https://docs.python.org/3/library/constants.html#None)*

Path property.

<a id="MullinsMaximumPreviousStrainEnergy.Plies"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Plies *: Iterable\[[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection](../../ImportedPliesCollection.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.ImportedPliesCollection)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Plies property.

<a id="MullinsMaximumPreviousStrainEnergy.PlotData"></a>

### *property* MullinsMaximumPreviousStrainEnergy.PlotData *: [Ansys.Mechanical.DataModel.Results.ResultDataTable](../../../../../Mechanical/DataModel/Results/ResultDataTable.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Results.ResultDataTable) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the result table.

<a id="MullinsMaximumPreviousStrainEnergy.Ply"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Ply *: Iterable\[[Ansys.ACT.Automation.Mechanical.AnalysisPly](../../AnalysisPly.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.AnalysisPly)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Ply selection.

<a id="MullinsMaximumPreviousStrainEnergy.Properties"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Properties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties for this object.

<a id="MullinsMaximumPreviousStrainEnergy.ScopingMethod"></a>

### *property* MullinsMaximumPreviousStrainEnergy.ScopingMethod *: [Ansys.Mechanical.DataModel.Enums.GeometryDefineByType](../../../../../Mechanical/DataModel/Enums/GeometryDefineByType.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.GeometryDefineByType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ScopingMethod.

<a id="MullinsMaximumPreviousStrainEnergy.SetNumber"></a>

### *property* MullinsMaximumPreviousStrainEnergy.SetNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Set Number.

<a id="MullinsMaximumPreviousStrainEnergy.SolutionCombinationDriver"></a>

### *property* MullinsMaximumPreviousStrainEnergy.SolutionCombinationDriver *: [Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle](../../../../../Mechanical/DataModel/Enums/SolutionCombinationDriverStyle.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SolutionCombinationDriver.

<a id="MullinsMaximumPreviousStrainEnergy.SolverComponentIDs"></a>

### *property* MullinsMaximumPreviousStrainEnergy.SolverComponentIDs *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SolverComponentIDs.

<a id="MullinsMaximumPreviousStrainEnergy.Substep"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Substep *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Substep.

<a id="MullinsMaximumPreviousStrainEnergy.Suppressed"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Suppressed *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Suppressed.

<a id="MullinsMaximumPreviousStrainEnergy.Surface"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Surface *: [Ansys.ACT.Automation.Mechanical.Surface](../../Surface.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Surface) | [None](https://docs.python.org/3/library/constants.html#None)*

Surface property.

<a id="MullinsMaximumPreviousStrainEnergy.SurfaceCoating"></a>

### *property* MullinsMaximumPreviousStrainEnergy.SurfaceCoating *: [Ansys.ACT.Automation.Mechanical.SurfaceCoating](../../SurfaceCoating.md#ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.SurfaceCoating) | [None](https://docs.python.org/3/library/constants.html#None)*

SurfaceCoating property.

<a id="MullinsMaximumPreviousStrainEnergy.Time"></a>

### *property* MullinsMaximumPreviousStrainEnergy.Time *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Time.

<a id="MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMaximumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMaximumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the maximum of maximum values.

<a id="MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMinimumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.TimeForMaximumOfMinimumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the maximum of minimum values.

<a id="MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMaximumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMaximumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the minimum of maximum values.

<a id="MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMinimumValues"></a>

### *property* MullinsMaximumPreviousStrainEnergy.TimeForMinimumOfMinimumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the minimum of minimum values.

<a id="MullinsMaximumPreviousStrainEnergy.VisibleProperties"></a>

### *property* MullinsMaximumPreviousStrainEnergy.VisibleProperties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties that are visible for this object.

<a id="MullinsMaximumPreviousStrainEnergy.WaterfallShowTextOnMosaic"></a>

### *property* MullinsMaximumPreviousStrainEnergy.WaterfallShowTextOnMosaic *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Waterfall Mosaic Text Property.

<a id="method-detail"></a>

## Method detail

<a id="MullinsMaximumPreviousStrainEnergy.Activate"></a>

### MullinsMaximumPreviousStrainEnergy.Activate()

Activate the current object.

<a id="MullinsMaximumPreviousStrainEnergy.AddAlert"></a>

### MullinsMaximumPreviousStrainEnergy.AddAlert()

Creates a new Alert

<a id="MullinsMaximumPreviousStrainEnergy.AddComment"></a>

### MullinsMaximumPreviousStrainEnergy.AddComment()

Creates a new child Comment.

<a id="MullinsMaximumPreviousStrainEnergy.AddConvergence"></a>

### MullinsMaximumPreviousStrainEnergy.AddConvergence()

Creates a new Convergence

<a id="MullinsMaximumPreviousStrainEnergy.AddFigure"></a>

### MullinsMaximumPreviousStrainEnergy.AddFigure()

Creates a new child Figure.

<a id="MullinsMaximumPreviousStrainEnergy.AddImage"></a>

### MullinsMaximumPreviousStrainEnergy.AddImage(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

```

<a id="MullinsMaximumPreviousStrainEnergy.ClearGeneratedData"></a>

### MullinsMaximumPreviousStrainEnergy.ClearGeneratedData()

Run the ClearGeneratedData action.

<a id="MullinsMaximumPreviousStrainEnergy.CopyTo"></a>

### MullinsMaximumPreviousStrainEnergy.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

<a id="MullinsMaximumPreviousStrainEnergy.CreateParameter"></a>

### MullinsMaximumPreviousStrainEnergy.CreateParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

CreateParameter method.

<a id="MullinsMaximumPreviousStrainEnergy.CreateResultsAtAllSets"></a>

### MullinsMaximumPreviousStrainEnergy.CreateResultsAtAllSets()

Creates results at all sets for results under a solution.

<a id="MullinsMaximumPreviousStrainEnergy.Delete"></a>

### MullinsMaximumPreviousStrainEnergy.Delete()

Run the Delete action.

<a id="MullinsMaximumPreviousStrainEnergy.Duplicate"></a>

### MullinsMaximumPreviousStrainEnergy.Duplicate()

Creates a copy of the current DataModelObject.

<a id="MullinsMaximumPreviousStrainEnergy.DuplicateWithoutResults"></a>

### MullinsMaximumPreviousStrainEnergy.DuplicateWithoutResults()

Run the DuplicateWithoutResults action.

<a id="MullinsMaximumPreviousStrainEnergy.EvaluateAllResults"></a>

### MullinsMaximumPreviousStrainEnergy.EvaluateAllResults()

Run the EvaluateAllResults action.

<a id="MullinsMaximumPreviousStrainEnergy.ExportAnimation"></a>

### MullinsMaximumPreviousStrainEnergy.ExportAnimation(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str), format: [Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat](../../../../../Mechanical/DataModel/Enums/GraphicsAnimationExportFormat.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat), settings: [Ansys.Mechanical.Graphics.AnimationExportSettings](../../../../../Mechanical/Graphics/AnimationExportSettings.md#ansys.mechanical.stubs.v242.Ansys.Mechanical.Graphics.AnimationExportSettings))

Run the ExportAnimation action.

<a id="MullinsMaximumPreviousStrainEnergy.ExportToTextFile"></a>

### MullinsMaximumPreviousStrainEnergy.ExportToTextFile(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

Run the ExportToTextFile action.

<a id="MullinsMaximumPreviousStrainEnergy.FetchRemoteResults"></a>

### MullinsMaximumPreviousStrainEnergy.FetchRemoteResults()

Run the FetchRemoteResult action.

<a id="MullinsMaximumPreviousStrainEnergy.GetChildren"></a>

### MullinsMaximumPreviousStrainEnergy.GetChildren(recurses: [bool](https://docs.python.org/3/library/functions.html#bool), children: List\[ChildrenType\])

Gets the list of children, filtered by type.

<a id="MullinsMaximumPreviousStrainEnergy.GetParameter"></a>

### MullinsMaximumPreviousStrainEnergy.GetParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Gets the parameter corresponding to the given property.

<a id="MullinsMaximumPreviousStrainEnergy.GroupAllSimilarChildren"></a>

### MullinsMaximumPreviousStrainEnergy.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

<a id="MullinsMaximumPreviousStrainEnergy.GroupSimilarObjects"></a>

### MullinsMaximumPreviousStrainEnergy.GroupSimilarObjects()

Run the GroupSimilarObjects action.

<a id="MullinsMaximumPreviousStrainEnergy.PromoteToNamedSelection"></a>

### MullinsMaximumPreviousStrainEnergy.PromoteToNamedSelection()

Run the PromoteToNamedSelection action.

<a id="MullinsMaximumPreviousStrainEnergy.PropertyByAPIName"></a>

### MullinsMaximumPreviousStrainEnergy.PropertyByAPIName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

```

<a id="MullinsMaximumPreviousStrainEnergy.PropertyByName"></a>

### MullinsMaximumPreviousStrainEnergy.PropertyByName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

Get a property by its unique name.

<a id="MullinsMaximumPreviousStrainEnergy.RemoveParameter"></a>

### MullinsMaximumPreviousStrainEnergy.RemoveParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Removes the parameter from the parameter set corresponding to the given property.

<a id="MullinsMaximumPreviousStrainEnergy.RenameBasedOnDefinition"></a>

### MullinsMaximumPreviousStrainEnergy.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.