## On this page

  

 

 # `FiberCompressiveFailureCriterion`

 Last update: 09.03.2026 

<a id="ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Results.DamageResults.FiberCompressiveFailureCriterion"></a>

#### *class* Ansys.ACT.Automation.Mechanical.Results.DamageResults.FiberCompressiveFailureCriterion

Bases: [`object`](https://docs.python.org/3/library/functions.html#object)

Defines a FiberCompressiveFailureCriterion.

<a id="overview"></a>

## Overview

### Methods

NameDescription[`Activate`](#FiberCompressiveFailureCriterion.Activate)Activate the current object.[`AddAlert`](#FiberCompressiveFailureCriterion.AddAlert)Creates a new Alert[`AddComment`](#FiberCompressiveFailureCriterion.AddComment)Creates a new child Comment.[`AddConvergence`](#FiberCompressiveFailureCriterion.AddConvergence)Creates a new Convergence[`AddFigure`](#FiberCompressiveFailureCriterion.AddFigure)Creates a new child Figure.[`AddImage`](#FiberCompressiveFailureCriterion.AddImage)Creates a new child Image.[`ClearGeneratedData`](#FiberCompressiveFailureCriterion.ClearGeneratedData)Run the ClearGeneratedData action.[`CopyTo`](#FiberCompressiveFailureCriterion.CopyTo)Copies all visible properties from this object to another.[`CreateParameter`](#FiberCompressiveFailureCriterion.CreateParameter)CreateParameter method.[`CreateResultsAtAllSets`](#FiberCompressiveFailureCriterion.CreateResultsAtAllSets)Creates results at all sets for results under a solution.[`Delete`](#FiberCompressiveFailureCriterion.Delete)Run the Delete action.[`Duplicate`](#FiberCompressiveFailureCriterion.Duplicate)Creates a copy of the current DataModelObject.[`DuplicateWithoutResults`](#FiberCompressiveFailureCriterion.DuplicateWithoutResults)Run the DuplicateWithoutResults action.[`EvaluateAllResults`](#FiberCompressiveFailureCriterion.EvaluateAllResults)Run the EvaluateAllResults action.[`ExportAnimation`](#FiberCompressiveFailureCriterion.ExportAnimation)Run the ExportAnimation action.[`ExportToTextFile`](#FiberCompressiveFailureCriterion.ExportToTextFile)Run the ExportToTextFile action.[`FetchRemoteResults`](#FiberCompressiveFailureCriterion.FetchRemoteResults)Run the FetchRemoteResult action.[`GetChildren`](#FiberCompressiveFailureCriterion.GetChildren)Gets the list of children, filtered by type.[`GetParameter`](#FiberCompressiveFailureCriterion.GetParameter)Gets the parameter corresponding to the given property.[`GroupAllSimilarChildren`](#FiberCompressiveFailureCriterion.GroupAllSimilarChildren)Run the GroupAllSimilarChildren action.[`GroupSimilarObjects`](#FiberCompressiveFailureCriterion.GroupSimilarObjects)Run the GroupSimilarObjects action.[`PromoteToNamedSelection`](#FiberCompressiveFailureCriterion.PromoteToNamedSelection)Run the PromoteToNamedSelection action.[`PropertyByAPIName`](#FiberCompressiveFailureCriterion.PropertyByAPIName)Get a property by its API name.[`PropertyByName`](#FiberCompressiveFailureCriterion.PropertyByName)Get a property by its unique name.[`RemoveParameter`](#FiberCompressiveFailureCriterion.RemoveParameter)Removes the parameter from the parameter set corresponding to the given property.[`RenameBasedOnDefinition`](#FiberCompressiveFailureCriterion.RenameBasedOnDefinition)Run the RenameBasedOnDefinition action.### Properties

NameDescription[`Average`](#FiberCompressiveFailureCriterion.Average)Gets the Average.[`By`](#FiberCompressiveFailureCriterion.By)Gets or sets the By.[`CalculateTimeHistory`](#FiberCompressiveFailureCriterion.CalculateTimeHistory)Gets or sets the CalculateTimeHistory.[`Children`](#FiberCompressiveFailureCriterion.Children)Gets the list of children.[`CombinationNumber`](#FiberCompressiveFailureCriterion.CombinationNumber)Gets or sets the Combination Number for a Solution Combination result.[`Comments`](#FiberCompressiveFailureCriterion.Comments)Gets the list of associated comments.[`CoordinateSystem`](#FiberCompressiveFailureCriterion.CoordinateSystem)Gets or sets the Coordinate System.[`CrackFrontNumber`](#FiberCompressiveFailureCriterion.CrackFrontNumber)Gets or sets the CrackFrontNumber.[`DamageResultType`](#FiberCompressiveFailureCriterion.DamageResultType)Gets the DamageResultType.[`DataModelObjectCategory`](#FiberCompressiveFailureCriterion.DataModelObjectCategory)Gets the current DataModelObject’s category.[`DisplayOption`](#FiberCompressiveFailureCriterion.DisplayOption)Gets or sets the DisplayOption.[`DisplayTime`](#FiberCompressiveFailureCriterion.DisplayTime)Gets or sets the DisplayTime.[`DpfEvaluation`](#FiberCompressiveFailureCriterion.DpfEvaluation)Gets or sets the DpfEvaluation.[`Figures`](#FiberCompressiveFailureCriterion.Figures)Gets the list of associated figures.[`GlobalIDs`](#FiberCompressiveFailureCriterion.GlobalIDs)Gets or sets the GlobalIDs.[`GraphControlsXAxis`](#FiberCompressiveFailureCriterion.GraphControlsXAxis)Gets or sets the GraphControlsXAxis.[`Identifier`](#FiberCompressiveFailureCriterion.Identifier)Gets or sets the Identifier.[`Images`](#FiberCompressiveFailureCriterion.Images)Gets the list of associated images.[`InternalObject`](#FiberCompressiveFailureCriterion.InternalObject)Gets the internal object. For advanced usage only.[`IsSolved`](#FiberCompressiveFailureCriterion.IsSolved)Gets the IsSolved.[`ItemType`](#FiberCompressiveFailureCriterion.ItemType)Gets or sets the ItemType.[`IterationNumber`](#FiberCompressiveFailureCriterion.IterationNumber)Gets the IterationNumber.[`LoadStep`](#FiberCompressiveFailureCriterion.LoadStep)Gets the LoadStep.[`LoadStepForMaximumOfMaximumValues`](#FiberCompressiveFailureCriterion.LoadStepForMaximumOfMaximumValues)Get the Load Step for the maximum of maximum values.[`LoadStepForMaximumOfMinimumValues`](#FiberCompressiveFailureCriterion.LoadStepForMaximumOfMinimumValues)Get the Load Step for the maximum of minimum values.[`LoadStepForMinimumOfMaximumValues`](#FiberCompressiveFailureCriterion.LoadStepForMinimumOfMaximumValues)Get the Load Step for the minimum of maximum values.[`LoadStepForMinimumOfMinimumValues`](#FiberCompressiveFailureCriterion.LoadStepForMinimumOfMinimumValues)Get the Load Step for the minimum of minimum values.[`LoadStepNumber`](#FiberCompressiveFailureCriterion.LoadStepNumber)Gets or sets the LoadStepNumber.[`Location`](#FiberCompressiveFailureCriterion.Location)Gets or sets the Location.[`Maximum`](#FiberCompressiveFailureCriterion.Maximum)Gets the Maximum.[`MaximumOccursOn`](#FiberCompressiveFailureCriterion.MaximumOccursOn)Gets the MaximumOccursOn.[`MaximumOfMaximumOverTime`](#FiberCompressiveFailureCriterion.MaximumOfMaximumOverTime)Gets the MaximumOfMaximumOverTime.[`MaximumOfMinimumOverTime`](#FiberCompressiveFailureCriterion.MaximumOfMinimumOverTime)Gets the MaximumOfMinimumOverTime.[`Minimum`](#FiberCompressiveFailureCriterion.Minimum)Gets the Minimum.[`MinimumOccursOn`](#FiberCompressiveFailureCriterion.MinimumOccursOn)Gets the MinimumOccursOn.[`MinimumOfMaximumOverTime`](#FiberCompressiveFailureCriterion.MinimumOfMaximumOverTime)Gets the MinimumOfMaximumOverTime.[`MinimumOfMinimumOverTime`](#FiberCompressiveFailureCriterion.MinimumOfMinimumOverTime)Gets the MinimumOfMinimumOverTime.[`Mode`](#FiberCompressiveFailureCriterion.Mode)Gets or sets the Mode.[`NamedSelections`](#FiberCompressiveFailureCriterion.NamedSelections)Gets or sets the NamedSelections.[`Path`](#FiberCompressiveFailureCriterion.Path)Path property.[`Plies`](#FiberCompressiveFailureCriterion.Plies)Plies property.[`PlotData`](#FiberCompressiveFailureCriterion.PlotData)Gets the result table.[`Ply`](#FiberCompressiveFailureCriterion.Ply)Gets or sets the Ply selection.[`Properties`](#FiberCompressiveFailureCriterion.Properties)Gets the list of properties for this object.[`RPMSelection`](#FiberCompressiveFailureCriterion.RPMSelection)Gets or sets the RPM Selection value at which the results are evaluated.[`ScopingMethod`](#FiberCompressiveFailureCriterion.ScopingMethod)Gets or sets the ScopingMethod.[`SetNumber`](#FiberCompressiveFailureCriterion.SetNumber)Gets or sets the Set Number.[`SolutionCombinationDriver`](#FiberCompressiveFailureCriterion.SolutionCombinationDriver)Gets or sets the SolutionCombinationDriver.[`SolverComponentIDs`](#FiberCompressiveFailureCriterion.SolverComponentIDs)Gets or sets the SolverComponentIDs.[`Substep`](#FiberCompressiveFailureCriterion.Substep)Gets the Substep.[`Suppressed`](#FiberCompressiveFailureCriterion.Suppressed)Gets or sets the Suppressed.[`Surface`](#FiberCompressiveFailureCriterion.Surface)Surface property.[`SurfaceCoating`](#FiberCompressiveFailureCriterion.SurfaceCoating)SurfaceCoating property.[`Time`](#FiberCompressiveFailureCriterion.Time)Gets the Time.[`TimeForMaximumOfMaximumValues`](#FiberCompressiveFailureCriterion.TimeForMaximumOfMaximumValues)Get the Time for the maximum of maximum values.[`TimeForMaximumOfMinimumValues`](#FiberCompressiveFailureCriterion.TimeForMaximumOfMinimumValues)Get the Time for the maximum of minimum values.[`TimeForMinimumOfMaximumValues`](#FiberCompressiveFailureCriterion.TimeForMinimumOfMaximumValues)Get the Time for the minimum of maximum values.[`TimeForMinimumOfMinimumValues`](#FiberCompressiveFailureCriterion.TimeForMinimumOfMinimumValues)Get the Time for the minimum of minimum values.[`Total`](#FiberCompressiveFailureCriterion.Total)Gets the Total.[`VisibleProperties`](#FiberCompressiveFailureCriterion.VisibleProperties)Gets the list of properties that are visible for this object.<a id="property-detail"></a>

## Property detail

<a id="FiberCompressiveFailureCriterion.Average"></a>

### *property* FiberCompressiveFailureCriterion.Average *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Average.

<a id="FiberCompressiveFailureCriterion.By"></a>

### *property* FiberCompressiveFailureCriterion.By *: [Ansys.Mechanical.DataModel.Enums.SetDriverStyle](../../../../../Mechanical/DataModel/Enums/SetDriverStyle.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.SetDriverStyle) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the By.

<a id="FiberCompressiveFailureCriterion.CalculateTimeHistory"></a>

### *property* FiberCompressiveFailureCriterion.CalculateTimeHistory *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CalculateTimeHistory.

<a id="FiberCompressiveFailureCriterion.Children"></a>

### *property* FiberCompressiveFailureCriterion.Children *: List\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of children.

<a id="FiberCompressiveFailureCriterion.CombinationNumber"></a>

### *property* FiberCompressiveFailureCriterion.CombinationNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Combination Number for a Solution Combination result.

<a id="FiberCompressiveFailureCriterion.Comments"></a>

### *property* FiberCompressiveFailureCriterion.Comments *: Iterable\[[Ansys.ACT.Automation.Mechanical.Comment](../../Comment.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Comment)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated comments.

<a id="FiberCompressiveFailureCriterion.CoordinateSystem"></a>

### *property* FiberCompressiveFailureCriterion.CoordinateSystem *: [Ansys.ACT.Automation.Mechanical.CoordinateSystem](../../CoordinateSystem.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.CoordinateSystem) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

<a id="FiberCompressiveFailureCriterion.CrackFrontNumber"></a>

### *property* FiberCompressiveFailureCriterion.CrackFrontNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the CrackFrontNumber.

<a id="FiberCompressiveFailureCriterion.DamageResultType"></a>

### *property* FiberCompressiveFailureCriterion.DamageResultType *: [Ansys.Mechanical.DataModel.Enums.DamageResultType](../../../../../Mechanical/DataModel/Enums/DamageResultType.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.DamageResultType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the DamageResultType.

<a id="FiberCompressiveFailureCriterion.DataModelObjectCategory"></a>

### *property* FiberCompressiveFailureCriterion.DataModelObjectCategory *: [Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory](../../../../../Mechanical/DataModel/Enums/DataModelObjectCategory.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the current DataModelObject’s category.

<a id="FiberCompressiveFailureCriterion.DisplayOption"></a>

### *property* FiberCompressiveFailureCriterion.DisplayOption *: [Ansys.Mechanical.DataModel.Enums.ResultAveragingType](../../../../../Mechanical/DataModel/Enums/ResultAveragingType.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.ResultAveragingType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DisplayOption.

<a id="FiberCompressiveFailureCriterion.DisplayTime"></a>

### *property* FiberCompressiveFailureCriterion.DisplayTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DisplayTime.

<a id="FiberCompressiveFailureCriterion.DpfEvaluation"></a>

### *property* FiberCompressiveFailureCriterion.DpfEvaluation *: [Ansys.Mechanical.DataModel.Enums.DpfEvaluationType](../../../../../Mechanical/DataModel/Enums/DpfEvaluationType.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.DpfEvaluationType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the DpfEvaluation.

<a id="FiberCompressiveFailureCriterion.Figures"></a>

### *property* FiberCompressiveFailureCriterion.Figures *: Iterable\[[Ansys.ACT.Automation.Mechanical.Figure](../../Figure.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Figure)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated figures.

<a id="FiberCompressiveFailureCriterion.GlobalIDs"></a>

### *property* FiberCompressiveFailureCriterion.GlobalIDs *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GlobalIDs.

<a id="FiberCompressiveFailureCriterion.GraphControlsXAxis"></a>

### *property* FiberCompressiveFailureCriterion.GraphControlsXAxis *: [Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis](../../../../../Mechanical/DataModel/Enums/GraphControlsXAxis.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the GraphControlsXAxis.

<a id="FiberCompressiveFailureCriterion.Identifier"></a>

### *property* FiberCompressiveFailureCriterion.Identifier *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Identifier.

<a id="FiberCompressiveFailureCriterion.Images"></a>

### *property* FiberCompressiveFailureCriterion.Images *: Iterable\[[Ansys.ACT.Automation.Mechanical.Image](../../Image.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Image)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated images.

<a id="FiberCompressiveFailureCriterion.InternalObject"></a>

### *property* FiberCompressiveFailureCriterion.InternalObject *: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the internal object. For advanced usage only.

<a id="FiberCompressiveFailureCriterion.IsSolved"></a>

### *property* FiberCompressiveFailureCriterion.IsSolved *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the IsSolved.

<a id="FiberCompressiveFailureCriterion.ItemType"></a>

### *property* FiberCompressiveFailureCriterion.ItemType *: [Ansys.Mechanical.DataModel.Enums.ResultFileItemType](../../../../../Mechanical/DataModel/Enums/ResultFileItemType.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.ResultFileItemType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ItemType.

<a id="FiberCompressiveFailureCriterion.IterationNumber"></a>

### *property* FiberCompressiveFailureCriterion.IterationNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the IterationNumber.

<a id="FiberCompressiveFailureCriterion.LoadStep"></a>

### *property* FiberCompressiveFailureCriterion.LoadStep *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the LoadStep.

<a id="FiberCompressiveFailureCriterion.LoadStepForMaximumOfMaximumValues"></a>

### *property* FiberCompressiveFailureCriterion.LoadStepForMaximumOfMaximumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the maximum of maximum values.

<a id="FiberCompressiveFailureCriterion.LoadStepForMaximumOfMinimumValues"></a>

### *property* FiberCompressiveFailureCriterion.LoadStepForMaximumOfMinimumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the maximum of minimum values.

<a id="FiberCompressiveFailureCriterion.LoadStepForMinimumOfMaximumValues"></a>

### *property* FiberCompressiveFailureCriterion.LoadStepForMinimumOfMaximumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the minimum of maximum values.

<a id="FiberCompressiveFailureCriterion.LoadStepForMinimumOfMinimumValues"></a>

### *property* FiberCompressiveFailureCriterion.LoadStepForMinimumOfMinimumValues *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Load Step for the minimum of minimum values.

<a id="FiberCompressiveFailureCriterion.LoadStepNumber"></a>

### *property* FiberCompressiveFailureCriterion.LoadStepNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the LoadStepNumber.

<a id="FiberCompressiveFailureCriterion.Location"></a>

### *property* FiberCompressiveFailureCriterion.Location *: Ansys.ACT.Interfaces.Common.ISelectionInfo | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Location.

<a id="FiberCompressiveFailureCriterion.Maximum"></a>

### *property* FiberCompressiveFailureCriterion.Maximum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Maximum.

<a id="FiberCompressiveFailureCriterion.MaximumOccursOn"></a>

### *property* FiberCompressiveFailureCriterion.MaximumOccursOn *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOccursOn.

<a id="FiberCompressiveFailureCriterion.MaximumOfMaximumOverTime"></a>

### *property* FiberCompressiveFailureCriterion.MaximumOfMaximumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOfMaximumOverTime.

<a id="FiberCompressiveFailureCriterion.MaximumOfMinimumOverTime"></a>

### *property* FiberCompressiveFailureCriterion.MaximumOfMinimumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MaximumOfMinimumOverTime.

<a id="FiberCompressiveFailureCriterion.Minimum"></a>

### *property* FiberCompressiveFailureCriterion.Minimum *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Minimum.

<a id="FiberCompressiveFailureCriterion.MinimumOccursOn"></a>

### *property* FiberCompressiveFailureCriterion.MinimumOccursOn *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOccursOn.

<a id="FiberCompressiveFailureCriterion.MinimumOfMaximumOverTime"></a>

### *property* FiberCompressiveFailureCriterion.MinimumOfMaximumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOfMaximumOverTime.

<a id="FiberCompressiveFailureCriterion.MinimumOfMinimumOverTime"></a>

### *property* FiberCompressiveFailureCriterion.MinimumOfMinimumOverTime *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the MinimumOfMinimumOverTime.

<a id="FiberCompressiveFailureCriterion.Mode"></a>

### *property* FiberCompressiveFailureCriterion.Mode *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Mode.

<a id="FiberCompressiveFailureCriterion.NamedSelections"></a>

### *property* FiberCompressiveFailureCriterion.NamedSelections *: Iterable\[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NamedSelections.

<a id="FiberCompressiveFailureCriterion.Path"></a>

### *property* FiberCompressiveFailureCriterion.Path *: [Ansys.ACT.Automation.Mechanical.Path](../../Path.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Path) | [None](https://docs.python.org/3/library/constants.html#None)*

Path property.

<a id="FiberCompressiveFailureCriterion.Plies"></a>

### *property* FiberCompressiveFailureCriterion.Plies *: Iterable\[[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection](../../ImportedPliesCollection.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.ImportedPliesCollection)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Plies property.

<a id="FiberCompressiveFailureCriterion.PlotData"></a>

### *property* FiberCompressiveFailureCriterion.PlotData *: [Ansys.Mechanical.DataModel.Results.ResultDataTable](../../../../../Mechanical/DataModel/Results/ResultDataTable.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Results.ResultDataTable) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the result table.

<a id="FiberCompressiveFailureCriterion.Ply"></a>

### *property* FiberCompressiveFailureCriterion.Ply *: Iterable\[[Ansys.ACT.Automation.Mechanical.AnalysisPly](../../AnalysisPly.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.AnalysisPly)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Ply selection.

<a id="FiberCompressiveFailureCriterion.Properties"></a>

### *property* FiberCompressiveFailureCriterion.Properties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties for this object.

<a id="FiberCompressiveFailureCriterion.RPMSelection"></a>

### *property* FiberCompressiveFailureCriterion.RPMSelection *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the RPM Selection value at which the results are evaluated.

<a id="FiberCompressiveFailureCriterion.ScopingMethod"></a>

### *property* FiberCompressiveFailureCriterion.ScopingMethod *: [Ansys.Mechanical.DataModel.Enums.GeometryDefineByType](../../../../../Mechanical/DataModel/Enums/GeometryDefineByType.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.GeometryDefineByType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ScopingMethod.

<a id="FiberCompressiveFailureCriterion.SetNumber"></a>

### *property* FiberCompressiveFailureCriterion.SetNumber *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Set Number.

<a id="FiberCompressiveFailureCriterion.SolutionCombinationDriver"></a>

### *property* FiberCompressiveFailureCriterion.SolutionCombinationDriver *: [Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle](../../../../../Mechanical/DataModel/Enums/SolutionCombinationDriverStyle.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SolutionCombinationDriver.

<a id="FiberCompressiveFailureCriterion.SolverComponentIDs"></a>

### *property* FiberCompressiveFailureCriterion.SolverComponentIDs *: [str](https://docs.python.org/3/library/stdtypes.html#str) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the SolverComponentIDs.

<a id="FiberCompressiveFailureCriterion.Substep"></a>

### *property* FiberCompressiveFailureCriterion.Substep *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Substep.

<a id="FiberCompressiveFailureCriterion.Suppressed"></a>

### *property* FiberCompressiveFailureCriterion.Suppressed *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Suppressed.

<a id="FiberCompressiveFailureCriterion.Surface"></a>

### *property* FiberCompressiveFailureCriterion.Surface *: [Ansys.ACT.Automation.Mechanical.Surface](../../Surface.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.Surface) | [None](https://docs.python.org/3/library/constants.html#None)*

Surface property.

<a id="FiberCompressiveFailureCriterion.SurfaceCoating"></a>

### *property* FiberCompressiveFailureCriterion.SurfaceCoating *: [Ansys.ACT.Automation.Mechanical.SurfaceCoating](../../SurfaceCoating.md#ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.SurfaceCoating) | [None](https://docs.python.org/3/library/constants.html#None)*

SurfaceCoating property.

<a id="FiberCompressiveFailureCriterion.Time"></a>

### *property* FiberCompressiveFailureCriterion.Time *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Time.

<a id="FiberCompressiveFailureCriterion.TimeForMaximumOfMaximumValues"></a>

### *property* FiberCompressiveFailureCriterion.TimeForMaximumOfMaximumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the maximum of maximum values.

<a id="FiberCompressiveFailureCriterion.TimeForMaximumOfMinimumValues"></a>

### *property* FiberCompressiveFailureCriterion.TimeForMaximumOfMinimumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the maximum of minimum values.

<a id="FiberCompressiveFailureCriterion.TimeForMinimumOfMaximumValues"></a>

### *property* FiberCompressiveFailureCriterion.TimeForMinimumOfMaximumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the minimum of maximum values.

<a id="FiberCompressiveFailureCriterion.TimeForMinimumOfMinimumValues"></a>

### *property* FiberCompressiveFailureCriterion.TimeForMinimumOfMinimumValues *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Get the Time for the minimum of minimum values.

<a id="FiberCompressiveFailureCriterion.Total"></a>

### *property* FiberCompressiveFailureCriterion.Total *: Ansys.Core.Units.Quantity | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the Total.

<a id="FiberCompressiveFailureCriterion.VisibleProperties"></a>

### *property* FiberCompressiveFailureCriterion.VisibleProperties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties that are visible for this object.

<a id="method-detail"></a>

## Method detail

<a id="FiberCompressiveFailureCriterion.Activate"></a>

### FiberCompressiveFailureCriterion.Activate()

Activate the current object.

<a id="FiberCompressiveFailureCriterion.AddAlert"></a>

### FiberCompressiveFailureCriterion.AddAlert()

Creates a new Alert

<a id="FiberCompressiveFailureCriterion.AddComment"></a>

### FiberCompressiveFailureCriterion.AddComment()

Creates a new child Comment.

<a id="FiberCompressiveFailureCriterion.AddConvergence"></a>

### FiberCompressiveFailureCriterion.AddConvergence()

Creates a new Convergence

<a id="FiberCompressiveFailureCriterion.AddFigure"></a>

### FiberCompressiveFailureCriterion.AddFigure()

Creates a new child Figure.

<a id="FiberCompressiveFailureCriterion.AddImage"></a>

### FiberCompressiveFailureCriterion.AddImage(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

```

<a id="FiberCompressiveFailureCriterion.ClearGeneratedData"></a>

### FiberCompressiveFailureCriterion.ClearGeneratedData()

Run the ClearGeneratedData action.

<a id="FiberCompressiveFailureCriterion.CopyTo"></a>

### FiberCompressiveFailureCriterion.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject)

Copies all visible properties from this object to another.

<a id="FiberCompressiveFailureCriterion.CreateParameter"></a>

### FiberCompressiveFailureCriterion.CreateParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

CreateParameter method.

<a id="FiberCompressiveFailureCriterion.CreateResultsAtAllSets"></a>

### FiberCompressiveFailureCriterion.CreateResultsAtAllSets()

Creates results at all sets for results under a solution.

<a id="FiberCompressiveFailureCriterion.Delete"></a>

### FiberCompressiveFailureCriterion.Delete()

Run the Delete action.

<a id="FiberCompressiveFailureCriterion.Duplicate"></a>

### FiberCompressiveFailureCriterion.Duplicate()

Creates a copy of the current DataModelObject.

<a id="FiberCompressiveFailureCriterion.DuplicateWithoutResults"></a>

### FiberCompressiveFailureCriterion.DuplicateWithoutResults()

Run the DuplicateWithoutResults action.

<a id="FiberCompressiveFailureCriterion.EvaluateAllResults"></a>

### FiberCompressiveFailureCriterion.EvaluateAllResults()

Run the EvaluateAllResults action.

<a id="FiberCompressiveFailureCriterion.ExportAnimation"></a>

### FiberCompressiveFailureCriterion.ExportAnimation(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str), format: [Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat](../../../../../Mechanical/DataModel/Enums/GraphicsAnimationExportFormat.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat), settings: [Ansys.Mechanical.Graphics.AnimationExportSettings](../../../../../Mechanical/Graphics/AnimationExportSettings.md#ansys.mechanical.stubs.v251.Ansys.Mechanical.Graphics.AnimationExportSettings))

Run the ExportAnimation action.

<a id="FiberCompressiveFailureCriterion.ExportToTextFile"></a>

### FiberCompressiveFailureCriterion.ExportToTextFile(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str))

Run the ExportToTextFile action.

<a id="FiberCompressiveFailureCriterion.FetchRemoteResults"></a>

### FiberCompressiveFailureCriterion.FetchRemoteResults()

Run the FetchRemoteResult action.

<a id="FiberCompressiveFailureCriterion.GetChildren"></a>

### FiberCompressiveFailureCriterion.GetChildren(recurses: [bool](https://docs.python.org/3/library/functions.html#bool), children: List\[ChildrenType\])

Gets the list of children, filtered by type.

<a id="FiberCompressiveFailureCriterion.GetParameter"></a>

### FiberCompressiveFailureCriterion.GetParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Gets the parameter corresponding to the given property.

<a id="FiberCompressiveFailureCriterion.GroupAllSimilarChildren"></a>

### FiberCompressiveFailureCriterion.GroupAllSimilarChildren()

Run the GroupAllSimilarChildren action.

<a id="FiberCompressiveFailureCriterion.GroupSimilarObjects"></a>

### FiberCompressiveFailureCriterion.GroupSimilarObjects()

Run the GroupSimilarObjects action.

<a id="FiberCompressiveFailureCriterion.PromoteToNamedSelection"></a>

### FiberCompressiveFailureCriterion.PromoteToNamedSelection()

Run the PromoteToNamedSelection action.

<a id="FiberCompressiveFailureCriterion.PropertyByAPIName"></a>

### FiberCompressiveFailureCriterion.PropertyByAPIName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

```text
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

```

<a id="FiberCompressiveFailureCriterion.PropertyByName"></a>

### FiberCompressiveFailureCriterion.PropertyByName(name: [str](https://docs.python.org/3/library/stdtypes.html#str))

Get a property by its unique name.

<a id="FiberCompressiveFailureCriterion.RemoveParameter"></a>

### FiberCompressiveFailureCriterion.RemoveParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str))

Removes the parameter from the parameter set corresponding to the given property.

<a id="FiberCompressiveFailureCriterion.RenameBasedOnDefinition"></a>

### FiberCompressiveFailureCriterion.RenameBasedOnDefinition()

Run the RenameBasedOnDefinition action.