`ImportedBodyForceDensity`

class Ansys.ACT.Automation.Mechanical.ImportedLoads.ImportedBodyForceDensity

Bases: object

Defines a ImportedBodyForceDensity.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddMappingValidation	Creates a new MappingValidation
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
ExportToTextFile	Run the ExportToTextFile action.
GetActivateAtLoadStep	Gets whether the imported body force density is active at the specified load step.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
Import	Import.
ImportLoad	Run the ImportLoad action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
ReloadConfiguration	Reload the Imported Load’s setup from its associated configuration file (if available).
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
SetActivateAtLoadStep	Sets whether the imported body force density is active at the specified load step.
SyncAnalysisFrequencies	Synchronizes the analysis settings’ RPMs and frequencies based on the selected imported load.

Properties

Name	Description
Algorithm	Algorithm property.
ApplyAs	This controls how the imported load is applied, either as a boundary condition or an initial condition.
BoundingBoxTolerance	BoundingBoxTolerance property.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
CreateNameSelectionForMappedNodes	CreateNameSelectionForMappedNodes property.
CreateNameSelectionForOutsideNodes	CreateNameSelectionForOutsideNodes property.
CreateNameSelectionForUnmappedNodes	CreateNameSelectionForUnmappedNodes property.
DataModelObjectCategory	Gets the current DataModelObject’s category.
DisplayInteriorPoints	DisplayInteriorPoints property.
DisplayProjectionPlane	DisplayProjectionPlane property.
DisplaySourcePointIds	DisplaySourcePointIds property.
DisplaySourcePoints	DisplaySourcePoints property.
ExtrapolationTolerancePercent	ExtrapolationTolerancePercent property.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Interpolation	Interpolation property.
KrigingCorrelationFunction	KrigingCorrelationFunction property.
KrigingPolynom	KrigingPolynom property.
Limit	Limit property.
Location	Gets or sets the Location.
MappedNodesName	MappedNodesName property.
Mapping	Mapping property.
MappingControl	MappingControl property.
MaxOutsideDistance	MaxOutsideDistance property.
Method	Method property.
NumberOfPoints	NumberOfPoints property.
OrientationRealignment	OrientationRealignment property.
OutsideDistanceCheck	OutsideDistanceCheck property.
OutsideNodesName	OutsideNodesName property.
OutsideOption	OutsideOption property.
Pinball	Pinball property.
Projection	Projection property.
Properties	Gets the list of properties for this object.
RigidBodyTransformationType	RigidBodyTransformationType property.
RigidTransformSourceCoordinateSystem	RigidTransformSourceCoordinateSystem property.
RigidTransformTargetCoordinateSystem	RigidTransformTargetCoordinateSystem property.
SharedRefBody	Gets or sets the SharedRefBody.
ShellThicknessFactor	ShellThicknessFactor property.
SourceMaximum	SourceMaximum property.
SourceMinimum	SourceMinimum property.
Suppressed	Gets or sets the Suppressed.
UnmappedNodesName	UnmappedNodesName property.
VariableType	VariableType property.
VisibleProperties	Gets the list of properties that are visible for this object.
Weighting	Weighting property.

Property detail

property ImportedBodyForceDensity.Algorithm : Ansys.Mechanical.DataModel.Enums.MappingAlgorithm | None

Algorithm property.

property ImportedBodyForceDensity.ApplyAs : Ansys.Mechanical.DataModel.Enums.ExternalLoadApplicationType | None

This controls how the imported load is applied, either as a boundary condition or an initial condition.

property ImportedBodyForceDensity.BoundingBoxTolerance : Ansys.Core.Units.Quantity | None

BoundingBoxTolerance property.

property ImportedBodyForceDensity.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ImportedBodyForceDensity.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ImportedBodyForceDensity.CreateNameSelectionForMappedNodes : bool | None

CreateNameSelectionForMappedNodes property.

property ImportedBodyForceDensity.CreateNameSelectionForOutsideNodes : bool | None

CreateNameSelectionForOutsideNodes property.

property ImportedBodyForceDensity.CreateNameSelectionForUnmappedNodes : bool | None

CreateNameSelectionForUnmappedNodes property.

property ImportedBodyForceDensity.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property ImportedBodyForceDensity.DisplayInteriorPoints : bool | None

DisplayInteriorPoints property.

property ImportedBodyForceDensity.DisplayProjectionPlane : bool | None

DisplayProjectionPlane property.

property ImportedBodyForceDensity.DisplaySourcePointIds : bool | None

DisplaySourcePointIds property.

property ImportedBodyForceDensity.DisplaySourcePoints : bool | None

DisplaySourcePoints property.

property ImportedBodyForceDensity.ExtrapolationTolerancePercent : float | None

ExtrapolationTolerancePercent property.

property ImportedBodyForceDensity.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ImportedBodyForceDensity.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ImportedBodyForceDensity.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSExternalLoadAuto | None

Gets the internal object. For advanced usage only.

property ImportedBodyForceDensity.Interpolation : Ansys.Mechanical.DataModel.Enums.InterpolationType | None

Interpolation property.

property ImportedBodyForceDensity.KrigingCorrelationFunction : Ansys.Mechanical.DataModel.Enums.KrigingCorrFuncType | None

KrigingCorrelationFunction property.

property ImportedBodyForceDensity.KrigingPolynom : Ansys.Mechanical.DataModel.Enums.KrigingPolynomType | None

KrigingPolynom property.

property ImportedBodyForceDensity.Limit : int | None

Limit property.

property ImportedBodyForceDensity.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property ImportedBodyForceDensity.MappedNodesName : str | None

MappedNodesName property.

property ImportedBodyForceDensity.Mapping : Ansys.Mechanical.DataModel.Enums.MappingInterpolationType | None

Mapping property.

property ImportedBodyForceDensity.MappingControl : Ansys.Mechanical.DataModel.Enums.MappingControlType | None

MappingControl property.

property ImportedBodyForceDensity.MaxOutsideDistance : Ansys.Core.Units.Quantity | None

MaxOutsideDistance property.

property ImportedBodyForceDensity.Method : Ansys.Mechanical.DataModel.Enums.MappingMethod | None

Method property.

property ImportedBodyForceDensity.NumberOfPoints : int | None

NumberOfPoints property.

property ImportedBodyForceDensity.OrientationRealignment : bool | None

OrientationRealignment property.

property ImportedBodyForceDensity.OutsideDistanceCheck : bool | None

OutsideDistanceCheck property.

property ImportedBodyForceDensity.OutsideNodesName : str | None

OutsideNodesName property.

property ImportedBodyForceDensity.OutsideOption : Ansys.Mechanical.DataModel.Enums.MappingOutsideOption | None

OutsideOption property.

property ImportedBodyForceDensity.Pinball : Ansys.Core.Units.Quantity | None

Pinball property.

property ImportedBodyForceDensity.Projection : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Projection property.

property ImportedBodyForceDensity.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ImportedBodyForceDensity.RigidBodyTransformationType : Ansys.Mechanical.DataModel.Enums.RigidBodyTransformationType | None

RigidBodyTransformationType property.

property ImportedBodyForceDensity.RigidTransformSourceCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformSourceCoordinateSystem property.

property ImportedBodyForceDensity.RigidTransformTargetCoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformTargetCoordinateSystem property.

property ImportedBodyForceDensity.SharedRefBody : Ansys.ACT.Automation.Mechanical.Body | None

Gets or sets the SharedRefBody.

property ImportedBodyForceDensity.ShellThicknessFactor : float | None

ShellThicknessFactor property.

property ImportedBodyForceDensity.SourceMaximum : Ansys.Core.Units.Quantity | None

SourceMaximum property.

property ImportedBodyForceDensity.SourceMinimum : Ansys.Core.Units.Quantity | None

SourceMinimum property.

property ImportedBodyForceDensity.Suppressed : bool | None

Gets or sets the Suppressed.

property ImportedBodyForceDensity.UnmappedNodesName : str | None

UnmappedNodesName property.

property ImportedBodyForceDensity.VariableType : Ansys.Mechanical.DataModel.Enums.MappingVariableType | None

VariableType property.

property ImportedBodyForceDensity.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property ImportedBodyForceDensity.Weighting : Ansys.Mechanical.DataModel.Enums.WeightingType | None

Weighting property.

Method detail

ImportedBodyForceDensity.Activate() → None

Activate the current object.

ImportedBodyForceDensity.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ImportedBodyForceDensity.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ImportedBodyForceDensity.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ImportedBodyForceDensity.AddMappingValidation() → Ansys.ACT.Automation.Mechanical.MappingValidation

Creates a new MappingValidation

ImportedBodyForceDensity.ClearGeneratedData() → None

Run the ClearGeneratedData action.

ImportedBodyForceDensity.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ImportedBodyForceDensity.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ImportedBodyForceDensity.Delete() → None

Run the Delete action.

ImportedBodyForceDensity.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ImportedBodyForceDensity.ExportToTextFile(filePath: str) → None

Run the ExportToTextFile action.

ImportedBodyForceDensity.GetActivateAtLoadStep(stepNumber: int) → bool

Gets whether the imported body force density is active at the specified load step.

ImportedBodyForceDensity.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ImportedBodyForceDensity.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ImportedBodyForceDensity.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ImportedBodyForceDensity.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ImportedBodyForceDensity.Import() → None

Import.

ImportedBodyForceDensity.ImportLoad() → None

Run the ImportLoad action.

ImportedBodyForceDensity.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ImportedBodyForceDensity.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ImportedBodyForceDensity.ReloadConfiguration() → None

Reload the Imported Load’s setup from its associated configuration file (if available).

ImportedBodyForceDensity.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

ImportedBodyForceDensity.SetActivateAtLoadStep(stepNumber: int, bActive: bool) → None

Sets whether the imported body force density is active at the specified load step.

ImportedBodyForceDensity.SyncAnalysisFrequencies() → None

Synchronizes the analysis settings' RPMs and frequencies based on the selected imported load.
    A `NotSupportedException` exception will be thrown when called with any non-supported imported loads.