    

 ## On this page

  

 

 # `Washer`

 Last update: 09.03.2026 

<a id="ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.MeshControls.Washer"></a>

#### *class* Ansys.ACT.Automation.Mechanical.MeshControls.Washer

Bases: [`object`](https://docs.python.org/3/library/functions.html#object)

Defines a Washer.

<a id="overview"></a>

## Overview

### Methods

NameDescription[`Activate`](#Washer.Activate)Activate the current object.[`AddComment`](#Washer.AddComment)Creates a new child Comment.[`AddFigure`](#Washer.AddFigure)Creates a new child Figure.[`AddImage`](#Washer.AddImage)Creates a new child Image.[`CopyTo`](#Washer.CopyTo)Copies all visible properties from this object to another.[`CreateParameter`](#Washer.CreateParameter)Creates a new parameter for a Property.[`Delete`](#Washer.Delete)Run the Delete action.[`Duplicate`](#Washer.Duplicate)Creates a copy of the current DataModelObject.[`GenerateMesh`](#Washer.GenerateMesh)Generate the Mesh.[`GetChildren`](#Washer.GetChildren)Gets the list of children, filtered by type.[`GetParameter`](#Washer.GetParameter)Gets the parameter corresponding to the given property.[`GroupAllSimilarChildren`](#Washer.GroupAllSimilarChildren)Run the GroupAllSimilarChildren action.[`GroupSimilarObjects`](#Washer.GroupSimilarObjects)Run the GroupSimilarObjects action.[`PropertyByAPIName`](#Washer.PropertyByAPIName)Get a property by its API name.[`PropertyByName`](#Washer.PropertyByName)Get a property by its unique name.[`RemoveParameter`](#Washer.RemoveParameter)Removes the parameter from the parameter set corresponding to the given property.[`RenameBasedOnDefinition`](#Washer.RenameBasedOnDefinition)Run the RenameBasedOnDefinition action.### Properties

NameDescription[`Children`](#Washer.Children)Gets the list of children.[`Comments`](#Washer.Comments)Gets the list of associated comments.[`DataModelObjectCategory`](#Washer.DataModelObjectCategory)Gets the current DataModelObject’s category.[`ElementSize`](#Washer.ElementSize)Gets or sets the Quad Layer Element Size.[`FaceNamedSelection`](#Washer.FaceNamedSelection)Gets or sets the Named Selection for Quad Layer Direction Face Scoping.[`FaceScopingMethod`](#Washer.FaceScopingMethod)Gets or sets the face scoping method for Quad Layer Direction.[`FaceSelection`](#Washer.FaceSelection)Gets or sets the Quad Layer Direction Face Geoemetry Selection.[`Figures`](#Washer.Figures)Gets the list of associated figures.[`FirstLayerHeight`](#Washer.FirstLayerHeight)FirstLayerHeight property.[`GrowthRate`](#Washer.GrowthRate)GrowthRate property.[`Images`](#Washer.Images)Gets the list of associated images.[`InternalObject`](#Washer.InternalObject)Gets the internal object. For advanced usage only.[`LayerTransitionType`](#Washer.LayerTransitionType)LayerTransitionType property.[`Location`](#Washer.Location)Gets or sets the Location.[`MinimumNumberOfDivisions`](#Washer.MinimumNumberOfDivisions)MinimumNumberOfDivisions property.[`NamedSelection`](#Washer.NamedSelection)Gets or sets the NamedSelection.[`NumberOfDivisions`](#Washer.NumberOfDivisions)NumberOfDivisions property.[`NumberOfLayers`](#Washer.NumberOfLayers)NumberOfLayers property.[`Properties`](#Washer.Properties)Gets the list of properties for this object.[`QuadLayerDefeatureProximityTolerance`](#Washer.QuadLayerDefeatureProximityTolerance)QuadLayerDefeatureProximityTolerance property.[`QuadLayerDirection`](#Washer.QuadLayerDirection)Gets or sets the Quad Layer Direction.[`QuadLayerType`](#Washer.QuadLayerType)Gets or sets the Quad Layer Type.[`Relaxation`](#Washer.Relaxation)Gets or sets the relaxation of Quad Layer.[`ScaleOfDiameter`](#Washer.ScaleOfDiameter)ScaleOfDiameter property.[`ScopingMethod`](#Washer.ScopingMethod)Gets or sets the ScopingMethod.[`Suppressed`](#Washer.Suppressed)Gets or sets the Suppressed.[`VisibleProperties`](#Washer.VisibleProperties)Gets the list of properties that are visible for this object.[`WasherAutoDefeature`](#Washer.WasherAutoDefeature)WasherAutoDefeature property.[`WasherHeightType`](#Washer.WasherHeightType)WasherHeightType property.[`WasherMethod`](#Washer.WasherMethod)WasherMethod property.<a id="property-detail"></a>

## Property detail

<a id="Washer.Children"></a>

### *property* Washer.Children *: List\[[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject](../../../../Mechanical/DataModel/Interfaces/IDataModelObject.md#ansys.mechanical.stubs.v252.Ansys.Mechanical.DataModel.Interfaces.IDataModelObject)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of children.

<a id="Washer.Comments"></a>

### *property* Washer.Comments *: Iterable\[[Ansys.ACT.Automation.Mechanical.Comment](../Comment.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Comment)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated comments.

<a id="Washer.DataModelObjectCategory"></a>

### *property* Washer.DataModelObjectCategory *: [Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory](../../../../Mechanical/DataModel/Enums/DataModelObjectCategory.md#ansys.mechanical.stubs.v252.Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the current DataModelObject’s category.

<a id="Washer.ElementSize"></a>

### *property* Washer.ElementSize *: [Ansys.Core.Units.Quantity](../../../../Core/Units/Quantity.md#ansys.mechanical.stubs.v252.Ansys.Core.Units.Quantity) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Quad Layer Element Size.

<a id="Washer.FaceNamedSelection"></a>

### *property* Washer.FaceNamedSelection *: [Ansys.ACT.Automation.Mechanical.NamedSelection](../NamedSelection.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.NamedSelection) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Named Selection for Quad Layer Direction Face Scoping.

<a id="Washer.FaceScopingMethod"></a>

### *property* Washer.FaceScopingMethod *: [Ansys.Mechanical.DataModel.Enums.GeometryDefineByType](../../../../Mechanical/DataModel/Enums/GeometryDefineByType.md#ansys.mechanical.stubs.v252.Ansys.Mechanical.DataModel.Enums.GeometryDefineByType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the face scoping method for Quad Layer Direction.

<a id="Washer.FaceSelection"></a>

### *property* Washer.FaceSelection *: [Ansys.ACT.Interfaces.Common.ISelectionInfo](../../../Interfaces/Common/ISelectionInfo.md#ansys.mechanical.stubs.v252.Ansys.ACT.Interfaces.Common.ISelectionInfo) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Quad Layer Direction Face Geoemetry Selection.

<a id="Washer.Figures"></a>

### *property* Washer.Figures *: Iterable\[[Ansys.ACT.Automation.Mechanical.Figure](../Figure.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Figure)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated figures.

<a id="Washer.FirstLayerHeight"></a>

### *property* Washer.FirstLayerHeight *: [Ansys.Core.Units.Quantity](../../../../Core/Units/Quantity.md#ansys.mechanical.stubs.v252.Ansys.Core.Units.Quantity) | [None](https://docs.python.org/3/library/constants.html#None)*

FirstLayerHeight property.

<a id="Washer.GrowthRate"></a>

### *property* Washer.GrowthRate *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

GrowthRate property.

<a id="Washer.Images"></a>

### *property* Washer.Images *: Iterable\[[Ansys.ACT.Automation.Mechanical.Image](../Image.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Image)\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of associated images.

<a id="Washer.InternalObject"></a>

### *property* Washer.InternalObject *: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlAuto | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the internal object. For advanced usage only.

<a id="Washer.LayerTransitionType"></a>

### *property* Washer.LayerTransitionType *: Ansys.Mechanical.DataModel.Enums.LayerTransitionType | [None](https://docs.python.org/3/library/constants.html#None)*

LayerTransitionType property.

<a id="Washer.Location"></a>

### *property* Washer.Location *: [Ansys.ACT.Interfaces.Common.ISelectionInfo](../../../Interfaces/Common/ISelectionInfo.md#ansys.mechanical.stubs.v252.Ansys.ACT.Interfaces.Common.ISelectionInfo) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Location.

<a id="Washer.MinimumNumberOfDivisions"></a>

### *property* Washer.MinimumNumberOfDivisions *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

MinimumNumberOfDivisions property.

<a id="Washer.NamedSelection"></a>

### *property* Washer.NamedSelection *: [Ansys.ACT.Automation.Mechanical.NamedSelection](../NamedSelection.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.NamedSelection) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the NamedSelection.

<a id="Washer.NumberOfDivisions"></a>

### *property* Washer.NumberOfDivisions *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

NumberOfDivisions property.

<a id="Washer.NumberOfLayers"></a>

### *property* Washer.NumberOfLayers *: [int](https://docs.python.org/3/library/functions.html#int) | [None](https://docs.python.org/3/library/constants.html#None)*

NumberOfLayers property.

<a id="Washer.Properties"></a>

### *property* Washer.Properties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties for this object.

<a id="Washer.QuadLayerDefeatureProximityTolerance"></a>

### *property* Washer.QuadLayerDefeatureProximityTolerance *: [Ansys.Core.Units.Quantity](../../../../Core/Units/Quantity.md#ansys.mechanical.stubs.v252.Ansys.Core.Units.Quantity) | [None](https://docs.python.org/3/library/constants.html#None)*

QuadLayerDefeatureProximityTolerance property.

<a id="Washer.QuadLayerDirection"></a>

### *property* Washer.QuadLayerDirection *: Ansys.Mechanical.DataModel.Enums.QuadLayerDirection | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Quad Layer Direction.

<a id="Washer.QuadLayerType"></a>

### *property* Washer.QuadLayerType *: Ansys.Mechanical.DataModel.Enums.QuadLayerType | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Quad Layer Type.

<a id="Washer.Relaxation"></a>

### *property* Washer.Relaxation *: Ansys.Mechanical.DataModel.Enums.QuadLayerRelaxation | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the relaxation of Quad Layer.

<a id="Washer.ScaleOfDiameter"></a>

### *property* Washer.ScaleOfDiameter *: [float](https://docs.python.org/3/library/functions.html#float) | [None](https://docs.python.org/3/library/constants.html#None)*

ScaleOfDiameter property.

<a id="Washer.ScopingMethod"></a>

### *property* Washer.ScopingMethod *: [Ansys.Mechanical.DataModel.Enums.GeometryDefineByType](../../../../Mechanical/DataModel/Enums/GeometryDefineByType.md#ansys.mechanical.stubs.v252.Ansys.Mechanical.DataModel.Enums.GeometryDefineByType) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the ScopingMethod.

<a id="Washer.Suppressed"></a>

### *property* Washer.Suppressed *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

Gets or sets the Suppressed.

<a id="Washer.VisibleProperties"></a>

### *property* Washer.VisibleProperties *: [tuple](https://docs.python.org/3/library/stdtypes.html#tuple)\[Ansys.ACT.Automation.Mechanical.Property\] | [None](https://docs.python.org/3/library/constants.html#None)*

Gets the list of properties that are visible for this object.

<a id="Washer.WasherAutoDefeature"></a>

### *property* Washer.WasherAutoDefeature *: [bool](https://docs.python.org/3/library/functions.html#bool) | [None](https://docs.python.org/3/library/constants.html#None)*

WasherAutoDefeature property.

<a id="Washer.WasherHeightType"></a>

### *property* Washer.WasherHeightType *: Ansys.Mechanical.DataModel.Enums.WasherType | [None](https://docs.python.org/3/library/constants.html#None)*

WasherHeightType property.

<a id="Washer.WasherMethod"></a>

### *property* Washer.WasherMethod *: Ansys.Mechanical.DataModel.Enums.WasherMethod | [None](https://docs.python.org/3/library/constants.html#None)*

WasherMethod property.

<a id="method-detail"></a>

## Method detail

<a id="Washer.Activate"></a>

### Washer.Activate() → [None](https://docs.python.org/3/library/constants.html#None)

Activate the current object.

<a id="Washer.AddComment"></a>

### Washer.AddComment() → [Ansys.ACT.Automation.Mechanical.Comment](../Comment.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Comment)

Creates a new child Comment.

<a id="Washer.AddFigure"></a>

### Washer.AddFigure() → [Ansys.ACT.Automation.Mechanical.Figure](../Figure.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Figure)

Creates a new child Figure.

<a id="Washer.AddImage"></a>

### Washer.AddImage(filePath: [str](https://docs.python.org/3/library/stdtypes.html#str)) → [Ansys.ACT.Automation.Mechanical.Image](../Image.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Image)

```text
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

```

<a id="Washer.CopyTo"></a>

### Washer.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → [None](https://docs.python.org/3/library/constants.html#None)

Copies all visible properties from this object to another.

<a id="Washer.CreateParameter"></a>

### Washer.CreateParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str)) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

<a id="Washer.Delete"></a>

### Washer.Delete() → [None](https://docs.python.org/3/library/constants.html#None)

Run the Delete action.

<a id="Washer.Duplicate"></a>

### Washer.Duplicate() → [Ansys.Mechanical.DataModel.Interfaces.IDataModelObject](../../../../Mechanical/DataModel/Interfaces/IDataModelObject.md#ansys.mechanical.stubs.v252.Ansys.Mechanical.DataModel.Interfaces.IDataModelObject)

Creates a copy of the current DataModelObject.

<a id="Washer.GenerateMesh"></a>

### Washer.GenerateMesh() → [None](https://docs.python.org/3/library/constants.html#None)

Generate the Mesh.

<a id="Washer.GetChildren"></a>

### Washer.GetChildren(recurses: [bool](https://docs.python.org/3/library/functions.html#bool), children: List\[ChildrenType\]) → List\[ChildrenType\]

Gets the list of children, filtered by type.

<a id="Washer.GetParameter"></a>

### Washer.GetParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str)) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

<a id="Washer.GroupAllSimilarChildren"></a>

### Washer.GroupAllSimilarChildren() → [None](https://docs.python.org/3/library/constants.html#None)

Run the GroupAllSimilarChildren action.

<a id="Washer.GroupSimilarObjects"></a>

### Washer.GroupSimilarObjects() → [Ansys.ACT.Automation.Mechanical.TreeGroupingFolder](../TreeGroupingFolder.md#ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.TreeGroupingFolder)

Run the GroupSimilarObjects action.

<a id="Washer.PropertyByAPIName"></a>

### Washer.PropertyByAPIName(name: [str](https://docs.python.org/3/library/stdtypes.html#str)) → Ansys.ACT.Automation.Mechanical.Property

```text
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

```

<a id="Washer.PropertyByName"></a>

### Washer.PropertyByName(name: [str](https://docs.python.org/3/library/stdtypes.html#str)) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

<a id="Washer.RemoveParameter"></a>

### Washer.RemoveParameter(propName: [str](https://docs.python.org/3/library/stdtypes.html#str)) → [None](https://docs.python.org/3/library/constants.html#None)

Removes the parameter from the parameter set corresponding to the given property.

<a id="Washer.RenameBasedOnDefinition"></a>

### Washer.RenameBasedOnDefinition() → [None](https://docs.python.org/3/library/constants.html#None)

Run the RenameBasedOnDefinition action.