`CurrentDensityProbe`
Last update: 09.03.2026class Ansys.ACT.Automation.Mechanical.Results.ProbeResults.CurrentDensityProbe
Bases: object
Defines a CurrentDensityProbe.
Overview
Methods
| Name | Description |
|---|---|
Activate |
Activate the current object. |
AddComment |
Creates a new child Comment. |
AddFigure |
Creates a new child Figure. |
AddImage |
Creates a new child Image. |
ClearGeneratedData |
Run the ClearGeneratedData action. |
CopyTo |
Copies all visible properties from this object to another. |
CreateParameter |
Creates a new parameter for a Property. |
Delete |
Run the Delete action. |
Duplicate |
Creates a copy of the current DataModelObject. |
DuplicateWithoutResults |
Run the DuplicateWithoutResults action. |
EvaluateAllResults |
Run the EvaluateAllResults action. |
ExportAnimation |
Run the ExportAnimation action. |
GetChildren |
Gets the list of children, filtered by type. |
GetParameter |
Gets the parameter corresponding to the given property. |
GroupAllSimilarChildren |
Run the GroupAllSimilarChildren action. |
GroupSimilarObjects |
Run the GroupSimilarObjects action. |
PropertyByAPIName |
Get a property by its API name. |
PropertyByName |
Get a property by its unique name. |
RemoveParameter |
Removes the parameter from the parameter set corresponding to the given property. |
RenameBasedOnDefinition |
Run the RenameBasedOnDefinition action. |
RetrieveResult |
Evaluates the individual probe result without evaluating all the results in the same solution. |
SnapToMeshNodes |
Snap the coordinates of probe result to the mesh nodes. |
Properties
| Name | Description |
|---|---|
BeamSelection |
Gets or sets the BeamSelection. |
BoundaryConditionSelection |
Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’. |
Children |
Gets the list of children. |
Comments |
Gets the list of associated comments. |
ContactRegionSelection |
Gets or sets the ContactRegionSelection. |
CoordinateSystemSelection |
Gets or sets the CoordinateSystemSelection. |
CurrentDensityTotal |
Gets the CurrentDensityTotal. |
DataModelObjectCategory |
Gets the current DataModelObject’s category. |
DisplayTime |
Gets or sets the DisplayTime. |
DpfEvaluation |
Gets or sets the DpfEvaluation. |
Figures |
Gets the list of associated figures. |
GeometryLocation |
Gets or sets the GeometryLocation. |
Images |
Gets the list of associated images. |
InternalObject |
Gets the internal object. For advanced usage only. |
IsSolved |
Gets the IsSolved. |
IterationNumber |
Gets the IterationNumber. |
LoadStep |
Gets the LoadStep. |
LoadStepNumber |
Gets or sets the LoadStepNumber. |
LocationMethod |
Gets or sets the LocationMethod. |
MaximumTotal |
Gets the MaximumTotal. |
MaximumXAxis |
Gets the MaximumXAxis. |
MaximumYAxis |
Gets the MaximumYAxis. |
MaximumZAxis |
Gets the MaximumZAxis. |
MeshConnectionSelection |
Gets or sets the MeshConnectionSelection. |
MinimumTotal |
Gets the MinimumTotal. |
MinimumXAxis |
Gets the MinimumXAxis. |
MinimumYAxis |
Gets the MinimumYAxis. |
MinimumZAxis |
Gets the MinimumZAxis. |
Orientation |
Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System. |
Properties |
Gets the list of properties for this object. |
RPMSelection |
Gets or sets the RPM Selection value at which the results are evaluated. |
RemotePointSelection |
Gets or sets the RemotePointSelection. |
ResultSelection |
Gets or sets the ResultSelection. |
SpatialResolution |
Gets or sets the SpatialResolution. |
SpringSelection |
Gets or sets the SpringSelection. |
Substep |
Gets the Substep. |
Summation |
Gets or sets the Summation. |
Suppressed |
Gets or sets the Suppressed. |
SurfaceSelection |
Gets or sets the MeshConnectionSelection. |
Time |
Gets the Time. |
Total |
Gets the Total. |
Type |
Gets the Type. |
VisibleProperties |
Gets the list of properties that are visible for this object. |
XAxis |
Gets the XAxis. |
XAxisCurrentDensity |
Gets the XAxisCurrentDensity. |
YAxis |
Gets the YAxis. |
YAxisCurrentDensity |
Gets the YAxisCurrentDensity. |
ZAxis |
Gets the ZAxis. |
ZAxisCurrentDensity |
Gets the ZAxisCurrentDensity. |
Property detail
property CurrentDensityProbe.BeamSelection : Ansys.ACT.Automation.Mechanical.Connections.Beam | None
Gets or sets the BeamSelection.
property CurrentDensityProbe.BoundaryConditionSelection : Ansys.ACT.Automation.Mechanical.DataModelObject | None
Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.
property CurrentDensityProbe.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets the list of children.
property CurrentDensityProbe.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None
Gets the list of associated comments.
property CurrentDensityProbe.ContactRegionSelection : Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None
Gets or sets the ContactRegionSelection.
property CurrentDensityProbe.CoordinateSystemSelection : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
Gets or sets the CoordinateSystemSelection.
property CurrentDensityProbe.CurrentDensityTotal : Ansys.Core.Units.Quantity | None
Gets the CurrentDensityTotal.
property CurrentDensityProbe.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None
Gets the current DataModelObject’s category.
property CurrentDensityProbe.DisplayTime : Ansys.Core.Units.Quantity | None
Gets or sets the DisplayTime.
property CurrentDensityProbe.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None
Gets or sets the DpfEvaluation.
property CurrentDensityProbe.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None
Gets the list of associated figures.
property CurrentDensityProbe.GeometryLocation : Ansys.ACT.Interfaces.Common.ISelectionInfo | None
Gets or sets the GeometryLocation.
property CurrentDensityProbe.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None
Gets the list of associated images.
property CurrentDensityProbe.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None
Gets the internal object. For advanced usage only.
property CurrentDensityProbe.IsSolved : bool | None
Gets the IsSolved.
property CurrentDensityProbe.IterationNumber : int | None
Gets the IterationNumber.
property CurrentDensityProbe.LoadStep : int | None
Gets the LoadStep.
property CurrentDensityProbe.LoadStepNumber : int | None
Gets or sets the LoadStepNumber.
property CurrentDensityProbe.LocationMethod : Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None
Gets or sets the LocationMethod.
property CurrentDensityProbe.MaximumTotal : Ansys.Core.Units.Quantity | None
Gets the MaximumTotal.
property CurrentDensityProbe.MaximumXAxis : Ansys.Core.Units.Quantity | None
Gets the MaximumXAxis.
property CurrentDensityProbe.MaximumYAxis : Ansys.Core.Units.Quantity | None
Gets the MaximumYAxis.
property CurrentDensityProbe.MaximumZAxis : Ansys.Core.Units.Quantity | None
Gets the MaximumZAxis.
property CurrentDensityProbe.MeshConnectionSelection : Ansys.ACT.Automation.Mechanical.MeshConnection | None
Gets or sets the MeshConnectionSelection.
property CurrentDensityProbe.MinimumTotal : Ansys.Core.Units.Quantity | None
Gets the MinimumTotal.
property CurrentDensityProbe.MinimumXAxis : Ansys.Core.Units.Quantity | None
Gets the MinimumXAxis.
property CurrentDensityProbe.MinimumYAxis : Ansys.Core.Units.Quantity | None
Gets the MinimumYAxis.
property CurrentDensityProbe.MinimumZAxis : Ansys.Core.Units.Quantity | None
Gets the MinimumZAxis.
property CurrentDensityProbe.Orientation : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None
Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
property CurrentDensityProbe.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties for this object.
property CurrentDensityProbe.RPMSelection : Ansys.Core.Units.Quantity | None
Gets or sets the RPM Selection value at which the results are evaluated.
property CurrentDensityProbe.RemotePointSelection : Ansys.ACT.Automation.Mechanical.RemotePoint | None
Gets or sets the RemotePointSelection.
property CurrentDensityProbe.ResultSelection : Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None
Gets or sets the ResultSelection.
property CurrentDensityProbe.SpatialResolution : Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None
Gets or sets the SpatialResolution.
property CurrentDensityProbe.SpringSelection : Ansys.ACT.Automation.Mechanical.Connections.Spring | None
Gets or sets the SpringSelection.
property CurrentDensityProbe.Substep : int | None
Gets the Substep.
property CurrentDensityProbe.Summation : Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None
Gets or sets the Summation.
property CurrentDensityProbe.Suppressed : bool | None
Gets or sets the Suppressed.
property CurrentDensityProbe.SurfaceSelection : Ansys.ACT.Automation.Mechanical.Surface | None
Gets or sets the MeshConnectionSelection.
property CurrentDensityProbe.Time : Ansys.Core.Units.Quantity | None
Gets the Time.
property CurrentDensityProbe.Total : Ansys.Core.Units.Quantity | None
Gets the Total.
property CurrentDensityProbe.Type : Ansys.Mechanical.DataModel.Enums.ProbeResultType | None
Gets the Type.
property CurrentDensityProbe.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties that are visible for this object.
property CurrentDensityProbe.XAxis : Ansys.Core.Units.Quantity | None
Gets the XAxis.
property CurrentDensityProbe.XAxisCurrentDensity : Ansys.Core.Units.Quantity | None
Gets the XAxisCurrentDensity.
property CurrentDensityProbe.YAxis : Ansys.Core.Units.Quantity | None
Gets the YAxis.
property CurrentDensityProbe.YAxisCurrentDensity : Ansys.Core.Units.Quantity | None
Gets the YAxisCurrentDensity.
property CurrentDensityProbe.ZAxis : Ansys.Core.Units.Quantity | None
Gets the ZAxis.
property CurrentDensityProbe.ZAxisCurrentDensity : Ansys.Core.Units.Quantity | None
Gets the ZAxisCurrentDensity.
Method detail
CurrentDensityProbe.Activate() → None
Activate the current object.
CurrentDensityProbe.AddComment() → Ansys.ACT.Automation.Mechanical.Comment
Creates a new child Comment.
CurrentDensityProbe.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure
Creates a new child Figure.
CurrentDensityProbe.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
CurrentDensityProbe.ClearGeneratedData() → None
Run the ClearGeneratedData action.
CurrentDensityProbe.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None
Copies all visible properties from this object to another.
CurrentDensityProbe.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter
Creates a new parameter for a Property.
CurrentDensityProbe.Delete() → None
Run the Delete action.
CurrentDensityProbe.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject
Creates a copy of the current DataModelObject.
CurrentDensityProbe.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject
Run the DuplicateWithoutResults action.
CurrentDensityProbe.EvaluateAllResults() → None
Run the EvaluateAllResults action.
CurrentDensityProbe.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None
Run the ExportAnimation action.
CurrentDensityProbe.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]
Gets the list of children, filtered by type.
CurrentDensityProbe.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter
Gets the parameter corresponding to the given property.
CurrentDensityProbe.GroupAllSimilarChildren() → None
Run the GroupAllSimilarChildren action.
CurrentDensityProbe.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder
Run the GroupSimilarObjects action.
CurrentDensityProbe.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
CurrentDensityProbe.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property
Get a property by its unique name.
CurrentDensityProbe.RemoveParameter(propName: str) → None
Removes the parameter from the parameter set corresponding to the given property.
CurrentDensityProbe.RenameBasedOnDefinition() → None
Run the RenameBasedOnDefinition action.
CurrentDensityProbe.RetrieveResult() → None
Evaluates the individual probe result without evaluating all the results in the same solution.
CurrentDensityProbe.SnapToMeshNodes() → None
Snap the coordinates of probe result to the mesh nodes.
