## On this page # Class BearingAPI Last update: 16.07.2025 Namespace: [VM.API.Pre.GearTrain](VM.API.Pre.GearTrain.md) Assembly: VM.API.Pre.GearTrain.dll This class implements APIs for class. ```csharp public static class BearingAPI ``` #### Inheritance [object](https://learn.microsoft.com/dotnet/api/system.object) ← [BearingAPI](VM.API.Pre.GearTrain.BearingAPI.md) #### Extension Methods [LinkPropertyItemCache.GetLinkProperties(object, LinkPropertyType)](VM.Models.Pre.Cache.LinkPropertyItemCache.md#VM_Models_Pre_Cache_LinkPropertyItemCache_GetLinkProperties_System_Object_VM_Models_Pre_LinkPropertyType_), [LinkPropertyItemCache.GetLinkPropertiesAndValues(object, LinkPropertyType)](VM.Models.Pre.Cache.LinkPropertyItemCache.md#VM_Models_Pre_Cache_LinkPropertyItemCache_GetLinkPropertiesAndValues_System_Object_VM_Models_Pre_LinkPropertyType_), [LinkPropertyItemCache.GetLinkedObjects<T>(object, LinkPropertyType)](VM.Models.Pre.Cache.LinkPropertyItemCache.md#VM_Models_Pre_Cache_LinkPropertyItemCache_GetLinkedObjects__1_System_Object_VM_Models_Pre_LinkPropertyType_) ## Methods ### ApplyRollingBearing(HiddenBearingDocument) Apply bearing in bearing designer. ```csharp [NotNull(new string[] { "document" })] public static void ApplyRollingBearing(this HiddenBearingDocument document) ``` #### Parameters `document` HiddenBearingDocument The for bearing apply. If null, the active document will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'bearing' arguments are empty. ### ApplySlidingBearing(HiddenSlidingBearingDocument) Apply sliding bearing in sliding bearing designer. ```csharp [NotNull(new string[] { "document" })] public static void ApplySlidingBearing(this HiddenSlidingBearingDocument document) ``` #### Parameters `document` HiddenSlidingBearingDocument The for sliding bearing apply. If null, the active document will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingBearing' arguments are empty. ### CreateBearingForAngularContactBall(GearTrainDocument, string, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, int, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?, Color?) Create for angular contact ball. ```csharp [NotNull(new string[] { "document" })] public static Obj CreateBearingForAngularContactBall(this GearTrainDocument document, string bearingName = "", ExpressionValueVariable? outerDiameterOfOuterRaceway = null, ExpressionValueVariable? innerDiameterOfOuterRaceway = null, ExpressionValueVariable? outerDiameterOfInnerRaceway = null, ExpressionValueVariable? innerDiameterOfInnerRaceway = null, ExpressionValueVariable? ballDiameter = null, ExpressionValueVariable? width = null, int numberOfBall = 11, ExpressionValueVariable? curvatureCenterOuter = null, ExpressionValueVariable? curvatureCenterInner = null, ExpressionValueVariable? roundingRadius = null, ExpressionValueVariable? outerRacewayShoulderBore2 = null, ExpressionValueVariable? innerRacewayShoulderDiameter2 = null, ExpressionValueVariable? actionPoint = null, ExpressionValueVariable? ballPitchDiameter = null, ExpressionValueVariable? ballCr = null, ExpressionValueVariable? ballC0r = null, ExpressionValueVariable? ballF0 = null, Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the bearing. If empty, default name starts with 'Rolling\_' will be generated and used. `outerDiameterOfOuterRaceway` ExpressionValueVariable? The outer diameter of outer raceway. The default value is 47. `innerDiameterOfOuterRaceway` ExpressionValueVariable? The inner diameter of outer raceway. The default value is 36.5. `outerDiameterOfInnerRaceway` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 30.8. `innerDiameterOfInnerRaceway` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 20. `ballDiameter` ExpressionValueVariable? The ball diameter. The default value is 7.938. `width` ExpressionValueVariable? The width. The default value is 14. `numberOfBall` [int](https://learn.microsoft.com/dotnet/api/system.int32) The number of ball. The default value is 11. `curvatureCenterOuter` ExpressionValueVariable? The curvature center of outer. The default value is 16.825. `curvatureCenterInner` ExpressionValueVariable? The curvature center of inner. The default value is 16.825. `roundingRadius` ExpressionValueVariable? The rounding radius. The default value is 1. `outerRacewayShoulderBore2` ExpressionValueVariable? The second shoulder bore of outer raceway. The default value is 41.7. `innerRacewayShoulderDiameter2` ExpressionValueVariable? The second shoulder diameter of outer raceway. The default value is 25.9. `actionPoint` ExpressionValueVariable? The action point. The default value is 21. `ballPitchDiameter` ExpressionValueVariable? The ball pitch diameter. The default value is 33.65. `ballCr` ExpressionValueVariable? The Cr. The default value is 14300. `ballC0r` ExpressionValueVariable? The C0r. The default value is 8150. `ballF0` ExpressionValueVariable? The f0. The default value is 15. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### CreateBearingForCylindricalRoller(GearTrainDocument, string, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, int, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?, Color?) Create for cylindrical roller. ```csharp [NotNull(new string[] { "document" })] public static Obj CreateBearingForCylindricalRoller(this GearTrainDocument document, string bearingName = "", ExpressionValueVariable? outerDiameterOfOuterRaceway = null, ExpressionValueVariable? innerDiameterOfOuterRaceway = null, ExpressionValueVariable? outerDiameterOfInnerRaceway = null, ExpressionValueVariable? innerDiameterOfInnerRaceway = null, ExpressionValueVariable? ballDiameter = null, ExpressionValueVariable? width = null, int numberOfBall = 13, ExpressionValueVariable? roundingRadius = null, ExpressionValueVariable? rollerLen = null, ExpressionValueVariable? rollerPDia = null, ExpressionValueVariable? rollerCr = null, ExpressionValueVariable? rollerC0r = null, Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the bearing. If empty, default name starts with 'Rolling\_' will be generated and used. `outerDiameterOfOuterRaceway` ExpressionValueVariable? The outer diameter of outer raceway. The default value is 47. `innerDiameterOfOuterRaceway` ExpressionValueVariable? The inner diameter of outer raceway. The default value is 36.5. `outerDiameterOfInnerRaceway` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 30.8. `innerDiameterOfInnerRaceway` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 20. `ballDiameter` ExpressionValueVariable? The ball diameter. The default value is 15. `width` ExpressionValueVariable? The width. The default value is 25. `numberOfBall` [int](https://learn.microsoft.com/dotnet/api/system.int32) The number of ball. The default value is 13. `roundingRadius` ExpressionValueVariable? The rounding radius. The default value is 1.5. `rollerLen` ExpressionValueVariable? The roller length. The default value is 16. `rollerPDia` ExpressionValueVariable? The roller pitch diameter. The default value is 73.5. `rollerCr` ExpressionValueVariable? The Cr. The default value is 112000. `rollerC0r` ExpressionValueVariable? The C0r. The default value is 100000. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### CreateBearingForRadialBall(GearTrainDocument, string, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, int, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?, Color?) Create for radial ball. ```csharp [NotNull(new string[] { "document" })] public static Obj CreateBearingForRadialBall(this GearTrainDocument document, string bearingName = "", ExpressionValueVariable? outerDiameterOfOuterRaceway = null, ExpressionValueVariable? innerDiameterOfOuterRaceway = null, ExpressionValueVariable? outerDiameterOfInnerRaceway = null, ExpressionValueVariable? innerDiameterOfInnerRaceway = null, ExpressionValueVariable? ballDiameter = null, ExpressionValueVariable? width = null, int numberOfBall = 13, ExpressionValueVariable? curvatureCenterOuter = null, ExpressionValueVariable? curvatureCenterInner = null, ExpressionValueVariable? roundingRadius = null, ExpressionValueVariable? ballPitchDiameter = null, ExpressionValueVariable? ballCr = null, ExpressionValueVariable? ballC0r = null, ExpressionValueVariable? ballF0 = null, Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the bearing. If empty, default name starts with 'Rolling\_' will be generated and used. `outerDiameterOfOuterRaceway` ExpressionValueVariable? The outer diameter of outer raceway. The default value is 32. `innerDiameterOfOuterRaceway` ExpressionValueVariable? The inner diameter of outer raceway. The default value is 28.3. `outerDiameterOfInnerRaceway` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 23.8. `innerDiameterOfInnerRaceway` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 20. `ballDiameter` ExpressionValueVariable? The ball diameter. The default value is 3.5. `width` ExpressionValueVariable? The width. The default value is 7. `numberOfBall` [int](https://learn.microsoft.com/dotnet/api/system.int32) The number of ball. The default value is 13. `curvatureCenterOuter` ExpressionValueVariable? The curvature center of outer. The default value is 13.025. `curvatureCenterInner` ExpressionValueVariable? The curvature center of inner. The default value is 13.025. `roundingRadius` ExpressionValueVariable? The rounding radius. The default value is 0.3. `ballPitchDiameter` ExpressionValueVariable? The ball pitch diameter. The default value is 26.5. `ballCr` ExpressionValueVariable? The Cr. The default value is 4030. `ballC0r` ExpressionValueVariable? The C0r. The default value is 2320. `ballF0` ExpressionValueVariable? The f0. The default value is 15. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### CreateBearingForTaperedRoller(GearTrainDocument, string, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, int, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?, Color?) Create for tapered roller. ```csharp [NotNull(new string[] { "document" })] public static Obj CreateBearingForTaperedRoller(this GearTrainDocument document, string bearingName = "", ExpressionValueVariable? outerDiameterOfOuterRaceway = null, ExpressionValueVariable? outerDiameterOfInnerRaceway = null, ExpressionValueVariable? innerDiameterOfInnerRaceway = null, ExpressionValueVariable? ballDiameter = null, ExpressionValueVariable? width = null, ExpressionValueVariable? coneW = null, ExpressionValueVariable? cupW = null, int numberOfBall = 15, ExpressionValueVariable? roundingRadius1 = null, ExpressionValueVariable? roundingRadius2 = null, ExpressionValueVariable? actionPoint = null, ExpressionValueVariable? rollerAlpha = null, ExpressionValueVariable? rollerCP = null, ExpressionValueVariable? rollerPR = null, ExpressionValueVariable? rollerLen = null, ExpressionValueVariable? rollerBeta = null, ExpressionValueVariable? rollerCr = null, ExpressionValueVariable? rollerC0r = null, ExpressionValueVariable? rollerE = null, ExpressionValueVariable? rollerY = null, Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the bearing. If empty, default name starts with 'Rolling\_' will be generated and used. `outerDiameterOfOuterRaceway` ExpressionValueVariable? The outer diameter of outer raceway. The default value is 47. `outerDiameterOfInnerRaceway` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 33.7. `innerDiameterOfInnerRaceway` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 20. `ballDiameter` ExpressionValueVariable? The ball diameter. The default value is 6.65. `width` ExpressionValueVariable? The width. The default value is 15.25. `coneW` ExpressionValueVariable? The width of cone. The default value is 14. `cupW` ExpressionValueVariable? The width of cup. The default value is 12. `numberOfBall` [int](https://learn.microsoft.com/dotnet/api/system.int32) The number of ball. The default value is 15. `roundingRadius1` ExpressionValueVariable? The first rounding radius. The default value is 1. `roundingRadius2` ExpressionValueVariable? The second rounding radius. The default value is 1. `actionPoint` ExpressionValueVariable? The action point. The default value is 11. `rollerAlpha` ExpressionValueVariable? The roller contact angle. The default value is 15.49851. `rollerCP` ExpressionValueVariable? The roller center point. The default value is 7.09849. `rollerPR` ExpressionValueVariable? The roller pitch radius. The default value is 33.7986. `rollerLen` ExpressionValueVariable? The roller length. The default value is 10. `rollerBeta` ExpressionValueVariable? The tapered angle. The default value is 4.99702. `rollerCr` ExpressionValueVariable? The Cr. The default value is 0.27500. `rollerC0r` ExpressionValueVariable? The C0r. The default value is 28000. `rollerE` ExpressionValueVariable? The e. The default value is 35. `rollerY` ExpressionValueVariable? The Y. The default value is 17. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### CreateSlidingBearing(GearTrainDocument, string, enSlidingBearingType, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?) Create . ```csharp [NotNull(new string[] { "document" })] public static Obj CreateSlidingBearing(this GearTrainDocument document, string bearingName = "", enSlidingBearingType type = enSlidingBearingType.CIRCULAR, ExpressionValueVariable? arcAngle = null, ExpressionValueVariable? length = null, ExpressionValueVariable? thickness = null, ExpressionValueVariable? innerRadius = null, Color? color = null) ``` #### Parameters `document` GearTrainDocument The document to create the sliding bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the sliding bearing. If empty, default name starts with 'Sliding\_' will be generated and used. `type` enSlidingBearingType The sliding bearing type. The default value is CIRCULAR. `arcAngle` ExpressionValueVariable? The arc angle. The default value is 80. `length` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 10. `thickness` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 5. `innerRadius` ExpressionValueVariable? The ball diameter. The default value is 30. `color` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### CreateSlidingBearing(GearTrainDocument, Obj, string, Color?) Create . ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "slidingBearingCopy" })] public static Obj CreateSlidingBearing(this GearTrainDocument document, Obj slidingBearingCopy, string bearingName = "", Color? color = null) ``` #### Parameters `document` GearTrainDocument The document to create the sliding bearing. `slidingBearingCopy` Obj The sliding bearing to be copied. The type is `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the sliding bearing. If empty, default name starts with 'Sliding\_' will be generated and used. `color` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingBearingCopy' arguments are empty. [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if type of 'slidingBearingCopy' is not . ### CreateStiffnessBearing(GearTrainDocument, string, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, IEnumerable<double>, int, ExpressionValueVariable?, ExpressionValueVariable?, ExpressionValueVariable?, Color?, Color?) Create StiffnessBearing . ```csharp [NotNull(new string[] { "document" })] public static Obj CreateStiffnessBearing(this GearTrainDocument document, string bearingName = "", ExpressionValueVariable? dampingRatio = null, ExpressionValueVariable? outerDiameterOfOuterRaceway = null, ExpressionValueVariable? innerDiameterOfOuterRaceway = null, ExpressionValueVariable? outerDiameterOfInnerRaceway = null, ExpressionValueVariable? innerDiameterOfInnerRaceway = null, ExpressionValueVariable? ballDiameter = null, ExpressionValueVariable? width = null, IEnumerable stiffness = null, int numberOfBall = 14, ExpressionValueVariable? unloadedContactAngle = null, ExpressionValueVariable? curvatureCenterOuter = null, ExpressionValueVariable? curvatureCenterInner = null, Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the stiffness bearing. `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the stiffness bearing. If empty, default name starts with 'Stiffness\_' will be generated and used. `dampingRatio` ExpressionValueVariable? The damping ratio. The default value is 0.00001. `outerDiameterOfOuterRaceway` ExpressionValueVariable? The outer diameter of outer raceway. The default value is 40. `innerDiameterOfOuterRaceway` ExpressionValueVariable? The inner diameter of outer raceway. The default value is 35. `outerDiameterOfInnerRaceway` ExpressionValueVariable? The outer diameter of inner raceway. The default value is 29. `innerDiameterOfInnerRaceway` ExpressionValueVariable? The inner diameter of inner raceway. The default value is 25. `ballDiameter` ExpressionValueVariable? The ball diameter. The default value is 4. `width` ExpressionValueVariable? The width. The default value is 12. `stiffness` [IEnumerable](https://learn.microsoft.com/dotnet/api/system.collections.generic.ienumerable-1)<[double](https://learn.microsoft.com/dotnet/api/system.double)> The stiffness. If it is not given, default values will be used. `numberOfBall` [int](https://learn.microsoft.com/dotnet/api/system.int32) The number of ball. The default value is 14. `unloadedContactAngle` ExpressionValueVariable? The unloaded contact angle. The default value is 0. `curvatureCenterOuter` ExpressionValueVariable? The curvature center of outer. The default value is 16. `curvatureCenterInner` ExpressionValueVariable? The curvature center of inner. The default value is 16. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if 'stiffness' argument is not null and the length of 'stiffness' is not 25. ### CreateStiffnessBearing(GearTrainDocument, Obj, string, Color?, Color?) Create StiffnessBearing . ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "bearingStiffnessCopy" })] public static Obj CreateStiffnessBearing(this GearTrainDocument document, Obj bearingStiffnessCopy, string bearingName = "", Color? outerRacewayColor = null, Color? innerRacewayColor = null) ``` #### Parameters `document` GearTrainDocument The document to create the stiffness bearing. `bearingStiffnessCopy` Obj The stiffness bearing to be copied. The type is `bearingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The name of the stiffness bearing. If empty, default name starts with 'Stiffness\_' will be generated and used. `outerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the outer raceway. `innerRacewayColor` [Color](https://learn.microsoft.com/dotnet/api/system.drawing.color)? The color of the inner raceway. #### Returns Obj The new object that is created by this API. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'bearingStiffnessCopy' arguments are empty. [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if type of 'bearingStiffnessCopy' is not . ### UpdateBearing(HiddenBearingDocument) Update bearing in bearing designer. ```csharp [NotNull(new string[] { "document" })] public static void UpdateBearing(this HiddenBearingDocument document) ``` #### Parameters `document` HiddenBearingDocument The for bearing update. If null, the active document will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### UpdateBearingInEF(HiddenDocumentMeshBase, string, string, Vector) Update bearing in EF shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "racewayName", "rbeName" })] [NotZeroMagnitude(new string[] { "zAxis" })] public static void UpdateBearingInEF(this HiddenDocumentMeshBase document, string racewayName, string rbeName, Vector zAxis) ``` #### Parameters `document` HiddenDocumentMeshBase The for bearing update. If null, the active document will be used. `racewayName` [string](https://learn.microsoft.com/dotnet/api/system.string) The raceway name to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. `zAxis` Vector The z axis. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'rbeName' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateBearingInEF(HiddenDocumentMeshBase, Obj, RacewayType, Obj, Vector) Update bearing in EF shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "bearing", "rbe" })] [NotZeroMagnitude(new string[] { "zAxis" })] public static void UpdateBearingInEF(this HiddenDocumentMeshBase document, Obj bearing, RacewayGeometryInfo.RacewayType racewayType, Obj rbe, Vector zAxis) ``` #### Parameters `document` HiddenDocumentMeshBase The for bearing update. If null, the active document will be used. `bearing` Obj The bearing. `racewayType` RacewayGeometryInfo.RacewayType The bearing raceway type. `rbe` Obj The rbe. `zAxis` Vector The z axis. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'rbe' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateBearingInFE(HiddenDocumentMeshBase, string, string, Vector) Update bearing in FE shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "racewayName", "rbeName" })] [NotZeroMagnitude(new string[] { "zAxis" })] public static void UpdateBearingInFE(this HiddenDocumentMeshBase document, string racewayName, string rbeName, Vector zAxis) ``` #### Parameters `document` HiddenDocumentMeshBase The for bearing update. If null, the active document will be used. `racewayName` [string](https://learn.microsoft.com/dotnet/api/system.string) The raceway name to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. `zAxis` Vector The z axis. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'rbeName' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateBearingInFE(HiddenDocumentMeshBase, Obj, RacewayType, Obj, Vector) Update bearing in FE shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "bearing", "rbe" })] [NotZeroMagnitude(new string[] { "zAxis" })] public static void UpdateBearingInFE(this HiddenDocumentMeshBase document, Obj bearing, RacewayGeometryInfo.RacewayType racewayType, Obj rbe, Vector zAxis) ``` #### Parameters `document` HiddenDocumentMeshBase The for bearing update. If null, the active document will be used. `bearing` Obj The bearing. `racewayType` RacewayGeometryInfo.RacewayType The bearing raceway type. `rbe` Obj The rbe. `zAxis` Vector The z axis. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'rbe' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateBearingInShaftSet(HiddenShaftSetDocument, string, ExpressionValueVariable, AttachLocationType, DirectionType, ClearanceParameters?) Update bearing in simple shaftset designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "racewayName" })] public static void UpdateBearingInShaftSet(this HiddenShaftSetDocument document, string racewayName, ExpressionValueVariable referenceOffset, AttachLocationType attachLocationType, DirectionType directionType, ClearanceParameters? clearanceParameters = null) ``` #### Parameters `document` HiddenShaftSetDocument The for bearing update. If null, the active document will be used. `racewayName` [string](https://learn.microsoft.com/dotnet/api/system.string) The raceway name to be attached on rbe. `referenceOffset` ExpressionValueVariable The reference offset. `attachLocationType` [AttachLocationType](VM.API.Pre.GearTrain.AttachLocationType.md) The attach location type. `directionType` [DirectionType](VM.API.Pre.GearTrain.DirectionType.md) The direction type. `clearanceParameters` [ClearanceParameters](VM.API.Pre.GearTrain.ClearanceParameters.md)? The clearance parameter. If it is not given, default values will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'clearanceInfo' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateBearingInShaftSet(HiddenShaftSetDocument, Obj?, RacewayType, ExpressionValueVariable, AttachLocationType, DirectionType, ClearanceParameters?) Update bearing in simple shaftset designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "bearing" })] public static void UpdateBearingInShaftSet(this HiddenShaftSetDocument document, Obj? bearing, RacewayGeometryInfo.RacewayType racewayType, ExpressionValueVariable referenceOffset, AttachLocationType attachLocationType, DirectionType directionType, ClearanceParameters? clearanceParameters = null) ``` #### Parameters `document` HiddenShaftSetDocument The for bearing update. If null, the active document will be used. `bearing` Obj? The bearing. `racewayType` RacewayGeometryInfo.RacewayType The bearing raceway type. `referenceOffset` ExpressionValueVariable The reference offset. `attachLocationType` [AttachLocationType](VM.API.Pre.GearTrain.AttachLocationType.md) The attach location type. `directionType` [DirectionType](VM.API.Pre.GearTrain.DirectionType.md) The direction type. `clearanceParameters` [ClearanceParameters](VM.API.Pre.GearTrain.ClearanceParameters.md)? The clearance parameter. If it is not given, default values will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'racewayName' or 'clearanceInfo' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateSlidingBearing(HiddenSlidingBearingDocument) Update sliding bearing in sliding bearing designer. ```csharp [NotNull(new string[] { "document" })] public static void UpdateSlidingBearing(this HiddenSlidingBearingDocument document) ``` #### Parameters `document` HiddenSlidingBearingDocument The for sliding bearing update. If null, the active document will be used. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' argument is empty. ### UpdateSlidingBearingInEF(HiddenDocumentMeshBase, string, string) Update sliding bearing in EF shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "slidingName", "rbeName" })] public static void UpdateSlidingBearingInEF(this HiddenDocumentMeshBase document, string slidingName, string rbeName) ``` #### Parameters `document` HiddenDocumentMeshBase The for sliding bearing update. If null, the active document will be used. `slidingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The sliding name to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'rbeName' arguments are empty. ### UpdateSlidingBearingInEF(HiddenDocumentMeshBase, Obj, string) Update sliding bearing in EF shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "slidingBearing" })] [NotNullOrEmpty(new string[] { "rbeName" })] public static void UpdateSlidingBearingInEF(this HiddenDocumentMeshBase document, Obj slidingBearing, string rbeName) ``` #### Parameters `document` HiddenDocumentMeshBase The for sliding bearing update. If null, the active document will be used. `slidingBearing` Obj The sliding bearing to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'rbeName' arguments are empty. ### UpdateSlidingBearingInFE(HiddenDocumentMeshBase, string, string) Update sliding bearing in FE shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "slidingName", "rbeName" })] public static void UpdateSlidingBearingInFE(this HiddenDocumentMeshBase document, string slidingName, string rbeName) ``` #### Parameters `document` HiddenDocumentMeshBase The for sliding bearing update. If null, the active document will be used. `slidingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The sliding name to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'rbeName' arguments are empty. ### UpdateSlidingBearingInFE(HiddenDocumentMeshBase, Obj, string) Update sliding bearing in FE shaftset/housing designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "slidingBearing" })] public static void UpdateSlidingBearingInFE(this HiddenDocumentMeshBase document, Obj slidingBearing, string rbeName) ``` #### Parameters `document` HiddenDocumentMeshBase The for sliding bearing update. If null, the active document will be used. `slidingBearing` Obj The sliding bearing to be attached on rbe. `rbeName` [string](https://learn.microsoft.com/dotnet/api/system.string) The rbe name. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'rbeName' arguments are empty. ### UpdateSlidingBearingInShaftSet(HiddenShaftSetDocument, string, ExpressionValueVariable, AttachLocationType, ExpressionValueVariable) Update sliding bearing in simple shaftset designer. ```csharp [NotNull(new string[] { "document" })] [NotNullOrEmpty(new string[] { "slidingName" })] public static void UpdateSlidingBearingInShaftSet(this HiddenShaftSetDocument document, string slidingName, ExpressionValueVariable referenceOffset, AttachLocationType attachLocationType, ExpressionValueVariable startAngle) ``` #### Parameters `document` HiddenShaftSetDocument The for sliding bearing update. If null, the active document will be used. `slidingName` [string](https://learn.microsoft.com/dotnet/api/system.string) The sliding name to be attached on rbe. `referenceOffset` ExpressionValueVariable The reference offset. `attachLocationType` [AttachLocationType](VM.API.Pre.GearTrain.AttachLocationType.md) The attach location type. `startAngle` ExpressionValueVariable The start angle. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'clearanceInfo' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0. ### UpdateSlidingBearingInShaftSet(HiddenShaftSetDocument, Obj, ExpressionValueVariable, AttachLocationType, ExpressionValueVariable) Update sliding bearing in simple shaftset designer. ```csharp [NotNull(new string[] { "document" })] [NotNullObj(new string[] { "slidingBearing" })] public static void UpdateSlidingBearingInShaftSet(this HiddenShaftSetDocument document, Obj slidingBearing, ExpressionValueVariable referenceOffset, AttachLocationType attachLocationType, ExpressionValueVariable startAngle) ``` #### Parameters `document` HiddenShaftSetDocument The for sliding bearing update. If null, the active document will be used. `slidingBearing` Obj The sliding bearing to be attached on rbe. `referenceOffset` ExpressionValueVariable The reference offset. `attachLocationType` [AttachLocationType](VM.API.Pre.GearTrain.AttachLocationType.md) The attach location type. `startAngle` ExpressionValueVariable The start angle. #### Exceptions [ArgumentNullException](https://learn.microsoft.com/dotnet/api/system.argumentnullexception) Will be thrown if 'document' or 'slidingName' or 'clearanceInfo' arguments are empty. [ArgumentException](https://learn.microsoft.com/dotnet/api/system.argumentexception) Will be thrown if the magnitude of 'zAxis' is 0.