## On this page

  

 

 # ansys.meshing.prime

 Last update: 17.07.2025 

# ansys.meshing.prime

[`disable_optimizing_numpy_arrays`](ansys.meshing.prime.disable_optimizing_numpy_arrays.md#ansys.meshing.prime.disable_optimizing_numpy_arrays)()Disable optimizing numpy arrays over the wire.[`enable_log_output`](ansys.meshing.prime.enable_log_output.md#ansys.meshing.prime.enable_log_output)(\[stream\])Enable logger output to given stream.[`enable_optimizing_numpy_arrays`](ansys.meshing.prime.enable_optimizing_numpy_arrays.md#ansys.meshing.prime.enable_optimizing_numpy_arrays)()Enable optimizing numpy arrays over the wire.[`is_optimizing_numpy_arrays`](ansys.meshing.prime.is_optimizing_numpy_arrays.md#ansys.meshing.prime.is_optimizing_numpy_arrays)()Determine if serialization of numpy arrays is enabled.[`launch_prime`](ansys.meshing.prime.launch_prime.md#ansys.meshing.prime.launch_prime)(\[prime\_root, ip, port, ...\])Launch an instance of Ansys Prime Server and get a client for it.[`launch_server_process`](ansys.meshing.prime.launch_server_process.md#ansys.meshing.prime.launch_server_process)(\[prime\_root, ip, ...\])Launch a server process for Ansys Prime Server.[`local_model`](ansys.meshing.prime.local_model.md#ansys.meshing.prime.local_model)()Get local model :rtype: [`Model`](ansys.meshing.prime.Model.md#ansys.meshing.prime.Model)[`numpy_array_optimization_disabled`](ansys.meshing.prime.numpy_array_optimization_disabled.md#ansys.meshing.prime.numpy_array_optimization_disabled)()Context helper to execute code with numpy optimization disabled.[`numpy_array_optimization_enabled`](ansys.meshing.prime.numpy_array_optimization_enabled.md#ansys.meshing.prime.numpy_array_optimization_enabled)()Context helper to execute code with numpy optimization enabled.[`AddLabelResults`](ansys.meshing.prime.AddLabelResults.md#ansys.meshing.prime.AddLabelResults)(\[model, error\_code, json\_data\])Results associated with the add label operation.[`AddThicknessParams`](ansys.meshing.prime.AddThicknessParams.md#ansys.meshing.prime.AddThicknessParams)(\[model, thickness, ...\])Parameters to add thickness for a given plane.[`AddThicknessResults`](ansys.meshing.prime.AddThicknessResults.md#ansys.meshing.prime.AddThicknessResults)(\[model, error\_code, ...\])Result structure associated with add thickness zonelets.[`AddToZoneResults`](ansys.meshing.prime.AddToZoneResults.md#ansys.meshing.prime.AddToZoneResults)(\[model, error\_code, ...\])Results associated with the add to zone operation.[`AdvancedSurferSetup`](ansys.meshing.prime.AdvancedSurferSetup.md#ansys.meshing.prime.AdvancedSurferSetup)(value)Define advanced settings for remeshing operation.[`AutoMesh`](ansys.meshing.prime.AutoMesh.md#ansys.meshing.prime.AutoMesh)(model)Generates volume mesh.[`AutoMeshParams`](ansys.meshing.prime.AutoMeshParams.md#ansys.meshing.prime.AutoMeshParams)(\[model, size\_field\_type, ...\])Parameters for volume meshing.[`AutoMeshResults`](ansys.meshing.prime.AutoMeshResults.md#ansys.meshing.prime.AutoMeshResults)(\[model, error\_code, ...\])Results of volume meshing.[`AutoNodeMoveParams`](ansys.meshing.prime.AutoNodeMoveParams.md#ansys.meshing.prime.AutoNodeMoveParams)(\[model, quality\_measure, ...\])Parameters used to improve volume mesh by auto node move.[`AutoQuadMesher`](ansys.meshing.prime.AutoQuadMesher.md#ansys.meshing.prime.AutoQuadMesher)(model)Generate full quad mesh.[`AutoQuadMesherResults`](ansys.meshing.prime.AutoQuadMesherResults.md#ansys.meshing.prime.AutoQuadMesherResults)(\[model, error\_code, ...\])Results of auto quad mesher.[`BCPair`](ansys.meshing.prime.BCPair.md#ansys.meshing.prime.BCPair)(\[model, source\_zonelet, ...\])Used to define boundary conditions for match morphing.[`BCPairType`](ansys.meshing.prime.BCPairType.md#ansys.meshing.prime.BCPairType)(value)Option to specify boundary condition pair type.[`BCsVolumetricModality`](ansys.meshing.prime.BCsVolumetricModality.md#ansys.meshing.prime.BCsVolumetricModality)(value)Indicate options to identify morphable region in input volumetric mesh.[`BOIType`](ansys.meshing.prime.BOIType.md#ansys.meshing.prime.BOIType)(value)BOI type for BOI creation.[`BoiSizingParams`](ansys.meshing.prime.BoiSizingParams.md#ansys.meshing.prime.BoiSizingParams)(\[model, max, growth\_rate, ...\])Size field computed using body of influence size control enables you to specify a body of influence(that is, a region for sizing control).[`BoundaryFittedSpline`](ansys.meshing.prime.BoundaryFittedSpline.md#ansys.meshing.prime.BoundaryFittedSpline)(model)BoundaryFittedSpline helps you to create splines for structured hex-mesh model.[`BoundaryFittedSplineParams`](ansys.meshing.prime.BoundaryFittedSplineParams.md#ansys.meshing.prime.BoundaryFittedSplineParams)(\[model, ...\])Boundary fitted spline fitting parameters.[`BoundingBox`](ansys.meshing.prime.BoundingBox.md#ansys.meshing.prime.BoundingBox)(\[model, xmin, ymin, zmin, xmax, ...\])Provides information about the definition of a bounding box.[`CadFaceter`](ansys.meshing.prime.CadFaceter.md#ansys.meshing.prime.CadFaceter)(value)Types of CAD faceter.[`CadReaderRoute`](ansys.meshing.prime.CadReaderRoute.md#ansys.meshing.prime.CadReaderRoute)(value)CAD Reader routes.[`CadRefacetingMaxEdgeSizeLimit`](ansys.meshing.prime.CadRefacetingMaxEdgeSizeLimit.md#ansys.meshing.prime.CadRefacetingMaxEdgeSizeLimit)(value)Types of maximum edge size limit for CAD faceting.[`CadRefacetingParams`](ansys.meshing.prime.CadRefacetingParams.md#ansys.meshing.prime.CadRefacetingParams)(\[model, cad\_faceter, ...\])Parameters to refacet CAD during import.[`CadRefacetingResolution`](ansys.meshing.prime.CadRefacetingResolution.md#ansys.meshing.prime.CadRefacetingResolution)(value)Levels of CAD faceting refinement.[`CdbSimulationType`](ansys.meshing.prime.CdbSimulationType.md#ansys.meshing.prime.CdbSimulationType)(value)Simulation Type for CDB export.[`CellQualityMeasure`](ansys.meshing.prime.CellQualityMeasure.md#ansys.meshing.prime.CellQualityMeasure)(value)The type of cell quality measures to check cell quality metrics.[`CellStatisticsParams`](ansys.meshing.prime.CellStatisticsParams.md#ansys.meshing.prime.CellStatisticsParams)(\[model, get\_volume, ...\])Parameters used to calculate cell statistics.[`CellStatisticsResults`](ansys.meshing.prime.CellStatisticsResults.md#ansys.meshing.prime.CellStatisticsResults)(\[model, volume, ...\])Results of cell statistics information.[`CellZoneletType`](ansys.meshing.prime.CellZoneletType.md#ansys.meshing.prime.CellZoneletType)(value)Types of cell zonelet.[`CheckFaceDeviationParams`](ansys.meshing.prime.CheckFaceDeviationParams.md#ansys.meshing.prime.CheckFaceDeviationParams)(\[model, distance, ...\])Parameters used for check face deviation operations.[`CheckFaceDeviationResults`](ansys.meshing.prime.CheckFaceDeviationResults.md#ansys.meshing.prime.CheckFaceDeviationResults)(\[model, ...\])Result structure associated with the check face deviation operations.[`CheckMeshParams`](ansys.meshing.prime.CheckMeshParams.md#ansys.meshing.prime.CheckMeshParams)(\[model, json\_data\])Parameters used to check mesh.[`CheckMeshResults`](ansys.meshing.prime.CheckMeshResults.md#ansys.meshing.prime.CheckMeshResults)(\[model, ...\])Result associated with the check mesh operation.[`CheckTopologyParams`](ansys.meshing.prime.CheckTopologyParams.md#ansys.meshing.prime.CheckTopologyParams)(\[model, ...\])Parameters for check topology operations.[`Client`](ansys.meshing.prime.Client.md#ansys.meshing.prime.Client)(\*\[, server\_process, ip, port, ...\])Provides the `Client` class for PyPrimeMesh.[`CollapseParams`](ansys.meshing.prime.CollapseParams.md#ansys.meshing.prime.CollapseParams)(\[model, feature\_type, ...\])Parameters to collapse face elements.[`CollapseResults`](ansys.meshing.prime.CollapseResults.md#ansys.meshing.prime.CollapseResults)(\[model, error\_code, ...\])Results associated with collapse face elements.[`CollapseTool`](ansys.meshing.prime.CollapseTool.md#ansys.meshing.prime.CollapseTool)(model)Performs various collapse operations.[`ComputeTopoVolumesResults`](ansys.meshing.prime.ComputeTopoVolumesResults.md#ansys.meshing.prime.ComputeTopoVolumesResults)(\[model, ...\])Results associated with compute topovolumes.[`ComputeVolumesParams`](ansys.meshing.prime.ComputeVolumesParams.md#ansys.meshing.prime.ComputeVolumesParams)(\[model, ...\])Parameters to compute volumes.[`ComputeVolumesResults`](ansys.meshing.prime.ComputeVolumesResults.md#ansys.meshing.prime.ComputeVolumesResults)(\[model, error\_code, ...\])Results associated with compute volumes.[`Connect`](ansys.meshing.prime.Connect.md#ansys.meshing.prime.Connect)(model)Connect face zonelets.[`ConnectFacesParams`](ansys.meshing.prime.ConnectFacesParams.md#ansys.meshing.prime.ConnectFacesParams)(\[model, ...\])Parameters for connect faces operation.[`ConnectResults`](ansys.meshing.prime.ConnectResults.md#ansys.meshing.prime.ConnectResults)(\[model, error\_code, ...\])Results associated with the connection operations.[`ContactPatchAxis`](ansys.meshing.prime.ContactPatchAxis.md#ansys.meshing.prime.ContactPatchAxis)(value)Flow or wake direction for BOI creation.[`ContactPreventionParams`](ansys.meshing.prime.ContactPreventionParams.md#ansys.meshing.prime.ContactPreventionParams)(\[model, ...\])ContactPreventionParams defines contact prevention control parameters for wrapper.[`ControlData`](ansys.meshing.prime.ControlData.md#ansys.meshing.prime.ControlData)(model, id, object\_id, name)Contains all controls.[`ControlPointSelection`](ansys.meshing.prime.ControlPointSelection.md#ansys.meshing.prime.ControlPointSelection)(value)Control point selection type.[`CopyZoneletsParams`](ansys.meshing.prime.CopyZoneletsParams.md#ansys.meshing.prime.CopyZoneletsParams)(\[model, copy\_zones, ...\])Parameters to copy zonelets.[`CopyZoneletsResults`](ansys.meshing.prime.CopyZoneletsResults.md#ansys.meshing.prime.CopyZoneletsResults)(\[model, error\_code, ...\])Result structure associated with copying zonelets.[`CreateBOIParams`](ansys.meshing.prime.CreateBOIParams.md#ansys.meshing.prime.CreateBOIParams)(\[model, boi\_type, ...\])Parameters used for BOI surface creation in the given axis.[`CreateBOIResults`](ansys.meshing.prime.CreateBOIResults.md#ansys.meshing.prime.CreateBOIResults)(\[model, error\_code, ...\])Result structure associated with BOI creation of zonelets.[`CreateCapParams`](ansys.meshing.prime.CreateCapParams.md#ansys.meshing.prime.CreateCapParams)(\[model, json\_data\])Parameters to create cap on face zonelets.[`CreateCapResults`](ansys.meshing.prime.CreateCapResults.md#ansys.meshing.prime.CreateCapResults)(\[model, error\_code, ...\])Results associated with create cap on face zonelets.[`CreateContactPatchParams`](ansys.meshing.prime.CreateContactPatchParams.md#ansys.meshing.prime.CreateContactPatchParams)(\[model, ...\])Parameters used for contact patch creation in the given axis.[`CreateContactPatchResults`](ansys.meshing.prime.CreateContactPatchResults.md#ansys.meshing.prime.CreateContactPatchResults)(\[model, ...\])Result structure associated with created contact patch zonelets.[`CreateIntersectionEdgeLoopsParams`](ansys.meshing.prime.CreateIntersectionEdgeLoopsParams.md#ansys.meshing.prime.CreateIntersectionEdgeLoopsParams)(\[model, ...\])Parameters used to calculate edge loops created by intersection of two groups of face zonelets.[`CreateIntersectionEdgeLoopsResults`](ansys.meshing.prime.CreateIntersectionEdgeLoopsResults.md#ansys.meshing.prime.CreateIntersectionEdgeLoopsResults)(\[model, ...\])Results for the edge loops created by intersection of two groups of face zonelets.[`CreateMaterialPointParams`](ansys.meshing.prime.CreateMaterialPointParams.md#ansys.meshing.prime.CreateMaterialPointParams)(\[model, type, ...\])Defines parameters to create material point.[`CreateMaterialPointResults`](ansys.meshing.prime.CreateMaterialPointResults.md#ansys.meshing.prime.CreateMaterialPointResults)(\[model, id, ...\])Results structure associated with create material point operation.[`CreateVolumeZonesType`](ansys.meshing.prime.CreateVolumeZonesType.md#ansys.meshing.prime.CreateVolumeZonesType)(value)Indicate type to create volume zones for volumes.[`CreateZoneResults`](ansys.meshing.prime.CreateZoneResults.md#ansys.meshing.prime.CreateZoneResults)(\[model, error\_code, ...\])Results associated with the create zone.[`CurvatureSizingParams`](ansys.meshing.prime.CurvatureSizingParams.md#ansys.meshing.prime.CurvatureSizingParams)(\[model, min, max, ...\])Size field using curvature size control computes edge and face sizes using their size and normal angle parameters.[`DefeatureTopologyParams`](ansys.meshing.prime.DefeatureTopologyParams.md#ansys.meshing.prime.DefeatureTopologyParams)(\[model, ...\])Parameters for defeature topology operations.[`DeleteFringesAndOverlapsParams`](ansys.meshing.prime.DeleteFringesAndOverlapsParams.md#ansys.meshing.prime.DeleteFringesAndOverlapsParams)(\[model, ...\])Parameters to delete fringes and overlapping faces.[`DeleteFringesAndOverlapsResults`](ansys.meshing.prime.DeleteFringesAndOverlapsResults.md#ansys.meshing.prime.DeleteFringesAndOverlapsResults)(\[model, ...\])Results associated with the delete fringes and overlapping faces operation.[`DeleteInteriorNodesParams`](ansys.meshing.prime.DeleteInteriorNodesParams.md#ansys.meshing.prime.DeleteInteriorNodesParams)(\[model, ...\])Parameters for delete interior nodes operation.[`DeleteMaterialPointResults`](ansys.meshing.prime.DeleteMaterialPointResults.md#ansys.meshing.prime.DeleteMaterialPointResults)(\[model, ...\])Results associated with delete material point operation.[`DeleteMeshParams`](ansys.meshing.prime.DeleteMeshParams.md#ansys.meshing.prime.DeleteMeshParams)(\[model, ...\])Parameters to delete mesh on topoentities.[`DeleteMeshResults`](ansys.meshing.prime.DeleteMeshResults.md#ansys.meshing.prime.DeleteMeshResults)(\[model, error\_code, json\_data\])Results structure associated with delete mesh on topofaces.[`DeleteResults`](ansys.meshing.prime.DeleteResults.md#ansys.meshing.prime.DeleteResults)(\[model, error\_code, json\_data\])Results associated with the deletion of items.[`DeleteTool`](ansys.meshing.prime.DeleteTool.md#ansys.meshing.prime.DeleteTool)(model)Performs various delete operation.[`DeleteTopoEntitiesParams`](ansys.meshing.prime.DeleteTopoEntitiesParams.md#ansys.meshing.prime.DeleteTopoEntitiesParams)(\[model, ...\])Parameters to control delete topoentities.[`DeleteTopoEntitiesResults`](ansys.meshing.prime.DeleteTopoEntitiesResults.md#ansys.meshing.prime.DeleteTopoEntitiesResults)(\[model, ...\])Results associated with delete topoentities.[`DeleteUnwettedParams`](ansys.meshing.prime.DeleteUnwettedParams.md#ansys.meshing.prime.DeleteUnwettedParams)(\[model, json\_data\])DeleteUnwettedParams defines parameters for delete unwetted surfaces operation.[`DeleteUnwettedResult`](ansys.meshing.prime.DeleteUnwettedResult.md#ansys.meshing.prime.DeleteUnwettedResult)(\[model, error\_code, ...\])Results structure associated with delete unwetted surfaces operation.[`DeleteVolumesParams`](ansys.meshing.prime.DeleteVolumesParams.md#ansys.meshing.prime.DeleteVolumesParams)(\[model, ...\])Parameters to delete volumes.[`DeleteVolumesResults`](ansys.meshing.prime.DeleteVolumesResults.md#ansys.meshing.prime.DeleteVolumesResults)(\[model, ...\])Results associated with delete volumes operation.[`DeleteZoneResults`](ansys.meshing.prime.DeleteZoneResults.md#ansys.meshing.prime.DeleteZoneResults)(\[model, error\_code, json\_data\])Results associated with the delete zone.[`DetectAndTreatCircularFacesParams`](ansys.meshing.prime.DetectAndTreatCircularFacesParams.md#ansys.meshing.prime.DetectAndTreatCircularFacesParams)(\[model, ...\])Parameters for detect and treat circular faces operation.[`DetectAndTreatFeaturesParams`](ansys.meshing.prime.DetectAndTreatFeaturesParams.md#ansys.meshing.prime.DetectAndTreatFeaturesParams)(\[model, ...\])Parameters for detect and treat features operations.[`DetectAndTreatHolesParams`](ansys.meshing.prime.DetectAndTreatHolesParams.md#ansys.meshing.prime.DetectAndTreatHolesParams)(\[model, ...\])Parameters for detect and treat holes operation.[`DetectCircularHolesParams`](ansys.meshing.prime.DetectCircularHolesParams.md#ansys.meshing.prime.DetectCircularHolesParams)(\[model, ...\])Parameters for detect circular holes operation.[`DetectHolesParams`](ansys.meshing.prime.DetectHolesParams.md#ansys.meshing.prime.DetectHolesParams)(\[model, ...\])Parameters for detect holes operation.[`DetectNonCircularHolesParams`](ansys.meshing.prime.DetectNonCircularHolesParams.md#ansys.meshing.prime.DetectNonCircularHolesParams)(\[model, ...\])Parameters for detect non circular holes operation.[`EdgeConnectType`](ansys.meshing.prime.EdgeConnectType.md#ansys.meshing.prime.EdgeConnectType)(value)Edge connect type to define the type of connection between edges .[`EdgeConnectivityResults`](ansys.meshing.prime.EdgeConnectivityResults.md#ansys.meshing.prime.EdgeConnectivityResults)(\[model, error\_code, ...\])Result of the edge connectivity information.[`ErrorCode`](ansys.meshing.prime.ErrorCode.md#ansys.meshing.prime.ErrorCode)(value)Error codes associated with the failure of PyPrimeMesh operation.[`ExportBoundaryFittedSplineParams`](ansys.meshing.prime.ExportBoundaryFittedSplineParams.md#ansys.meshing.prime.ExportBoundaryFittedSplineParams)(\[model, ...\])Parameters for exporting boundary fitted splines.[`ExportFluentCaseParams`](ansys.meshing.prime.ExportFluentCaseParams.md#ansys.meshing.prime.ExportFluentCaseParams)(\[model, cff\_format, ...\])Parameters to export fluent case file.[`ExportFluentMeshingMeshParams`](ansys.meshing.prime.ExportFluentMeshingMeshParams.md#ansys.meshing.prime.ExportFluentMeshingMeshParams)(\[model, json\_data\])Parameters used to export fluent meshing mesh.[`ExportLSDynaIgaKeywordFileParams`](ansys.meshing.prime.ExportLSDynaIgaKeywordFileParams.md#ansys.meshing.prime.ExportLSDynaIgaKeywordFileParams)(\[model, ...\])Parameters for exporting LS-Dyna IGA keyword file.[`ExportMapdlCdbParams`](ansys.meshing.prime.ExportMapdlCdbParams.md#ansys.meshing.prime.ExportMapdlCdbParams)(\[model, ...\])Parameters to control MAPDL CDB export settings.[`ExportMapdlCdbResults`](ansys.meshing.prime.ExportMapdlCdbResults.md#ansys.meshing.prime.ExportMapdlCdbResults)(\[model, error\_code, ...\])Results associated with the MAPDL CDB export.[`ExportSTLParams`](ansys.meshing.prime.ExportSTLParams.md#ansys.meshing.prime.ExportSTLParams)(\[model, part\_ids, json\_data\])Parameters to export STL file.[`ExtractFeatureParams`](ansys.meshing.prime.ExtractFeatureParams.md#ansys.meshing.prime.ExtractFeatureParams)(\[model, replace, ...\])Parameter to control feature edge extraction.[`ExtractFeatureResults`](ansys.meshing.prime.ExtractFeatureResults.md#ansys.meshing.prime.ExtractFeatureResults)(\[model, ...\])Result of edge zonelet extraction by angle.[`ExtractTopoVolumesParams`](ansys.meshing.prime.ExtractTopoVolumesParams.md#ansys.meshing.prime.ExtractTopoVolumesParams)(\[model, zone\_name, ...\])Parameters to extract flow topovolumes.[`ExtractTopoVolumesResults`](ansys.meshing.prime.ExtractTopoVolumesResults.md#ansys.meshing.prime.ExtractTopoVolumesResults)(\[model, volumes, ...\])Parameters to extract flow topovolumes.[`ExtractVolumesParams`](ansys.meshing.prime.ExtractVolumesParams.md#ansys.meshing.prime.ExtractVolumesParams)(\[model, create\_zone, ...\])Parameters to extract flow volumes.[`ExtractVolumesResults`](ansys.meshing.prime.ExtractVolumesResults.md#ansys.meshing.prime.ExtractVolumesResults)(\[model, error\_code, ...\])Results associated with compute volumes.[`ExtractedFeatureIds`](ansys.meshing.prime.ExtractedFeatureIds.md#ansys.meshing.prime.ExtractedFeatureIds)(\[model, part\_id, ...\])Contains ids of the features extracted.[`FaceAndEdgeConnectivityParams`](ansys.meshing.prime.FaceAndEdgeConnectivityParams.md#ansys.meshing.prime.FaceAndEdgeConnectivityParams)(\[model, ...\])Parameters to get face and edge connectivity information.[`FaceAndEdgeConnectivityResults`](ansys.meshing.prime.FaceAndEdgeConnectivityResults.md#ansys.meshing.prime.FaceAndEdgeConnectivityResults)(\[model, ...\])Result of the face and edge connectivity information.[`FaceConnectivityResults`](ansys.meshing.prime.FaceConnectivityResults.md#ansys.meshing.prime.FaceConnectivityResults)(\[model, error\_code, ...\])Result of the face connectivity information.[`FaceQualityMeasure`](ansys.meshing.prime.FaceQualityMeasure.md#ansys.meshing.prime.FaceQualityMeasure)(value)The type of face quality measures to check face quality metrics.[`FeatureExtraction`](ansys.meshing.prime.FeatureExtraction.md#ansys.meshing.prime.FeatureExtraction)(model)Provide functions for all feature extraction operations like extracting edges zonlelets, tracing node paths.[`FeatureRecoveryParams`](ansys.meshing.prime.FeatureRecoveryParams.md#ansys.meshing.prime.FeatureRecoveryParams)(\[model, scope, ...\])FeatureRecoveryParams defines feature recovery control parameters for wrapper.[`FileIO`](ansys.meshing.prime.FileIO.md#ansys.meshing.prime.FileIO)(model)Handles reading or writing files from the disk.[`FileReadParams`](ansys.meshing.prime.FileReadParams.md#ansys.meshing.prime.FileReadParams)(\[model, append, json\_data\])Parameters to read file.[`FileReadResults`](ansys.meshing.prime.FileReadResults.md#ansys.meshing.prime.FileReadResults)(\[model, error\_code, json\_data\])Results of file read operation.[`FileWriteParams`](ansys.meshing.prime.FileWriteParams.md#ansys.meshing.prime.FileWriteParams)(\[model, json\_data\])Parameters to write a file.[`FileWriteResults`](ansys.meshing.prime.FileWriteResults.md#ansys.meshing.prime.FileWriteResults)(\[model, error\_code, ...\])Results of file write operation.[`FillHolesAtPlaneParams`](ansys.meshing.prime.FillHolesAtPlaneParams.md#ansys.meshing.prime.FillHolesAtPlaneParams)(\[model, create\_zone, ...\])Parameters to fill holes at given plane.[`FillHolesAtPlaneResults`](ansys.meshing.prime.FillHolesAtPlaneResults.md#ansys.meshing.prime.FillHolesAtPlaneResults)(\[model, error\_code, ...\])Results associated with fill holes at given plane.[`FixInvalidNormalNodeParams`](ansys.meshing.prime.FixInvalidNormalNodeParams.md#ansys.meshing.prime.FixInvalidNormalNodeParams)(\[model, ...\])Parameters to fix invalid average face normal at nodes by creating a nugget.[`FixInvalidNormalNodeResults`](ansys.meshing.prime.FixInvalidNormalNodeResults.md#ansys.meshing.prime.FixInvalidNormalNodeResults)(\[model, ...\])Results associated with fix invalid average face normal at nodes.[`FlowDirection`](ansys.meshing.prime.FlowDirection.md#ansys.meshing.prime.FlowDirection)(value)Flow or wake direction for BOI creation.[`GlobalSizingParams`](ansys.meshing.prime.GlobalSizingParams.md#ansys.meshing.prime.GlobalSizingParams)(\[model, min, max, ...\])Global sizing parameters.[`HardSizingParams`](ansys.meshing.prime.HardSizingParams.md#ansys.meshing.prime.HardSizingParams)(\[model, min, growth\_rate, ...\])Size field computed using hard size control enables you to maintain a uniform size based on the size specified.[`HexCoreCellElementType`](ansys.meshing.prime.HexCoreCellElementType.md#ansys.meshing.prime.HexCoreCellElementType)(value)Cell element type of hex-shaped cells.[`HexCoreParams`](ansys.meshing.prime.HexCoreParams.md#ansys.meshing.prime.HexCoreParams)(\[model, ...\])Parameters to control hexahedral mesh generation.[`HexCoreTransitionLayerType`](ansys.meshing.prime.HexCoreTransitionLayerType.md#ansys.meshing.prime.HexCoreTransitionLayerType)(value)Handle size transition of hex cells.[`IGAResults`](ansys.meshing.prime.IGAResults.md#ansys.meshing.prime.IGAResults)(\[model, error\_code, ...\])Results of IGA operations.[`IGASpline`](ansys.meshing.prime.IGASpline.md#ansys.meshing.prime.IGASpline)(\[model, id, json\_data\])Information of the spline.[`IGAUnstructuredSplineSurf`](ansys.meshing.prime.IGAUnstructuredSplineSurf.md#ansys.meshing.prime.IGAUnstructuredSplineSurf)(\[model, id, ...\])Information of unstructured spline surface.[`ImportAbaqusParams`](ansys.meshing.prime.ImportAbaqusParams.md#ansys.meshing.prime.ImportAbaqusParams)(\[model, json\_data\])Parameters for importing Abaqus solver input files.[`ImportAbaqusResults`](ansys.meshing.prime.ImportAbaqusResults.md#ansys.meshing.prime.ImportAbaqusResults)(\[model, error\_code, ...\])Results of Abaqus import operation.[`ImportCadParams`](ansys.meshing.prime.ImportCadParams.md#ansys.meshing.prime.ImportCadParams)(\[model, append, ...\])Parameters to control CAD import settings.[`ImportCadResults`](ansys.meshing.prime.ImportCadResults.md#ansys.meshing.prime.ImportCadResults)(\[model, error\_code, ...\])Results associated with the CAD import.[`ImportFluentCaseParams`](ansys.meshing.prime.ImportFluentCaseParams.md#ansys.meshing.prime.ImportFluentCaseParams)(\[model, append, ...\])Parameters to import fluent case file.[`ImportFluentCaseResults`](ansys.meshing.prime.ImportFluentCaseResults.md#ansys.meshing.prime.ImportFluentCaseResults)(\[model, error\_code, ...\])Results associated with fluent case import.[`ImportFluentMeshingMeshParams`](ansys.meshing.prime.ImportFluentMeshingMeshParams.md#ansys.meshing.prime.ImportFluentMeshingMeshParams)(\[model, ...\])Parameters used to import fluent meshing mesh.[`ImportFluentMeshingMeshResults`](ansys.meshing.prime.ImportFluentMeshingMeshResults.md#ansys.meshing.prime.ImportFluentMeshingMeshResults)(\[model, ...\])Results associated with fluent meshing mesh import.[`ImportMapdlCdbParams`](ansys.meshing.prime.ImportMapdlCdbParams.md#ansys.meshing.prime.ImportMapdlCdbParams)(\[model, ...\])Parameters to control MAPDL CDB import settings.[`ImportMapdlCdbResults`](ansys.meshing.prime.ImportMapdlCdbResults.md#ansys.meshing.prime.ImportMapdlCdbResults)(\[model, error\_code, ...\])Results associated with the MAPDL CDB import.[`IntersectParams`](ansys.meshing.prime.IntersectParams.md#ansys.meshing.prime.IntersectParams)(\[model, tolerance, ...\])Parameters used for intersection.[`IntersectionMask`](ansys.meshing.prime.IntersectionMask.md#ansys.meshing.prime.IntersectionMask)(value)Scaffold parameters use intersection mask to define nature of intersection computation.[`JoinParams`](ansys.meshing.prime.JoinParams.md#ansys.meshing.prime.JoinParams)(\[model, tolerance, ...\])Parameters used for join.[`JoinSeparateMethod`](ansys.meshing.prime.JoinSeparateMethod.md#ansys.meshing.prime.JoinSeparateMethod)(value)Join separation method to handle separated overlapped zonelets.[`LeakPreventionParams`](ansys.meshing.prime.LeakPreventionParams.md#ansys.meshing.prime.LeakPreventionParams)(\[model, ...\])LeakPreventionParams defines leakage prevention control parameters for wrapper.[`LengthUnit`](ansys.meshing.prime.LengthUnit.md#ansys.meshing.prime.LengthUnit)(value)Length units[`LocalSurferParams`](ansys.meshing.prime.LocalSurferParams.md#ansys.meshing.prime.LocalSurferParams)(\[model, min\_angle, ...\])Parameters to perform local surface remeshing.[`LocalSurferResults`](ansys.meshing.prime.LocalSurferResults.md#ansys.meshing.prime.LocalSurferResults)(\[model, error\_code, ...\])Results associated with the local surface mesh.[`MatchMorphParams`](ansys.meshing.prime.MatchMorphParams.md#ansys.meshing.prime.MatchMorphParams)(\[model, json\_data\])MatchMorphParams describes the parameters required for match morphing.[`MatchMorphResults`](ansys.meshing.prime.MatchMorphResults.md#ansys.meshing.prime.MatchMorphResults)(\[model, error\_code, json\_data\])Results associated with match morph operation.[`MatchPair`](ansys.meshing.prime.MatchPair.md#ansys.meshing.prime.MatchPair)(\[model, source\_surfaces, ...\])Match pair to specify sources, targets for match morphing.[`MatchPairTargetType`](ansys.meshing.prime.MatchPairTargetType.md#ansys.meshing.prime.MatchPairTargetType)(value)Match morph target type.[`MatchedMeshOption`](ansys.meshing.prime.MatchedMeshOption.md#ansys.meshing.prime.MatchedMeshOption)(value)Type to specify treatment of matched mesh.[`MaterialPointManager`](ansys.meshing.prime.MaterialPointManager.md#ansys.meshing.prime.MaterialPointManager)(model, id, object\_id, name)Provide functions for material point creation, deletion and queries.[`MaterialPointType`](ansys.meshing.prime.MaterialPointType.md#ansys.meshing.prime.MaterialPointType)(value)Defines define type of material point.[`MergeBoundaryNodesParams`](ansys.meshing.prime.MergeBoundaryNodesParams.md#ansys.meshing.prime.MergeBoundaryNodesParams)(\[model, tolerance, ...\])Parameters used for the merge boundary nodes operation.[`MergeBoundaryNodesResults`](ansys.meshing.prime.MergeBoundaryNodesResults.md#ansys.meshing.prime.MergeBoundaryNodesResults)(\[model, ...\])Results associated with the merge nodes operation.[`MergeNodeType`](ansys.meshing.prime.MergeNodeType.md#ansys.meshing.prime.MergeNodeType)(value)Type of nodes to be merged.[`MergePartsParams`](ansys.meshing.prime.MergePartsParams.md#ansys.meshing.prime.MergePartsParams)(\[model, ...\])Parameters to merge parts.[`MergePartsResults`](ansys.meshing.prime.MergePartsResults.md#ansys.meshing.prime.MergePartsResults)(\[model, error\_code, ...\])Parameters to merge parts.[`MergeVolumesParams`](ansys.meshing.prime.MergeVolumesParams.md#ansys.meshing.prime.MergeVolumesParams)(\[model, ...\])Parameters to merge volumes.[`MergeVolumesResults`](ansys.meshing.prime.MergeVolumesResults.md#ansys.meshing.prime.MergeVolumesResults)(\[model, merged\_volumes, ...\])Results associated with merge volumes operation.[`MergeZoneletsParams`](ansys.meshing.prime.MergeZoneletsParams.md#ansys.meshing.prime.MergeZoneletsParams)(\[model, ...\])Parameters to merge zonelets.[`MergeZoneletsResults`](ansys.meshing.prime.MergeZoneletsResults.md#ansys.meshing.prime.MergeZoneletsResults)(\[model, ...\])Results associated with merge zonelets.[`MeshInfo`](ansys.meshing.prime.MeshInfo.md#ansys.meshing.prime.MeshInfo)(model)MeshInfo provides information about the mesh connectivity and more.[`MeshStackerParams`](ansys.meshing.prime.MeshStackerParams.md#ansys.meshing.prime.MeshStackerParams)(\[model, origin, ...\])Input parameters associated with the mesh stacker operations.[`MeshStackerResults`](ansys.meshing.prime.MeshStackerResults.md#ansys.meshing.prime.MeshStackerResults)(\[model, error\_code, ...\])Results associated with the mesh stacker operations.[`MeshedSizingParams`](ansys.meshing.prime.MeshedSizingParams.md#ansys.meshing.prime.MeshedSizingParams)(\[model, growth\_rate, ...\])Size field computed using meshed size control enables you to set the size based on existing sizes.[`Model`](ansys.meshing.prime.Model.md#ansys.meshing.prime.Model)(comm, id, object\_id, name)Model is the nucleus of Prime.[`MorphBCParams`](ansys.meshing.prime.MorphBCParams.md#ansys.meshing.prime.MorphBCParams)(\[model, morph\_region\_method, ...\])MorphBCParams contains the input parameters for calculating the boundary conditions for a morphing problem.[`MorphSolveParams`](ansys.meshing.prime.MorphSolveParams.md#ansys.meshing.prime.MorphSolveParams)(\[model, json\_data\])Morpher solve parameters.[`Morpher`](ansys.meshing.prime.Morpher.md#ansys.meshing.prime.Morpher)(model)Morpher contain functionalities to change the geometry, adapting the mesh accordingly without a recomputation.[`MultiZoneControl`](ansys.meshing.prime.MultiZoneControl.md#ansys.meshing.prime.MultiZoneControl)(model, id, object\_id, name)MultiZone Control to describe parameters and controls used for MultiZone meshing.[`MultiZoneEdgeBiasingParams`](ansys.meshing.prime.MultiZoneEdgeBiasingParams.md#ansys.meshing.prime.MultiZoneEdgeBiasingParams)(\[model, ...\])Defines MultiZone edge biasing control parameters.[`MultiZoneMapMeshParams`](ansys.meshing.prime.MultiZoneMapMeshParams.md#ansys.meshing.prime.MultiZoneMapMeshParams)(\[model, scope, json\_data\])Define controlling parameters for the map mesh using MultiZone.[`MultiZoneSizingParams`](ansys.meshing.prime.MultiZoneSizingParams.md#ansys.meshing.prime.MultiZoneSizingParams)(\[model, max\_size, ...\])Parameters for MultiZone meshing.[`MultiZoneSweepMeshParams`](ansys.meshing.prime.MultiZoneSweepMeshParams.md#ansys.meshing.prime.MultiZoneSweepMeshParams)(\[model, ...\])Defines MultiZone thin sweep mesh control parameters.[`NamePatternParams`](ansys.meshing.prime.NamePatternParams.md#ansys.meshing.prime.NamePatternParams)(\[model, json\_data\])Parameters to be used to match name pattern with names.[`OptimizeQuadMeshParams`](ansys.meshing.prime.OptimizeQuadMeshParams.md#ansys.meshing.prime.OptimizeQuadMeshParams)(\[model, ...\])Parameters for optimize quad mesh operations.[`OverlapPairs`](ansys.meshing.prime.OverlapPairs.md#ansys.meshing.prime.OverlapPairs)(\[model, zone\_id0, zone\_id1, ...\])Provides ids of a pair of overlapping face zonelets.[`OverlapSearchResults`](ansys.meshing.prime.OverlapSearchResults.md#ansys.meshing.prime.OverlapSearchResults)(\[model, n\_pairs, ...\])Provides ids of a pair of overlapping face zonelets.[`Part`](ansys.meshing.prime.Part.md#ansys.meshing.prime.Part)(model, id, object\_id, name)Part contains zonelets and topoentities.[`PartCreationType`](ansys.meshing.prime.PartCreationType.md#ansys.meshing.prime.PartCreationType)(value)Part Creation Type decides whether to create a part per CAD Model, Assembly, Part, Body.[`PartSummaryParams`](ansys.meshing.prime.PartSummaryParams.md#ansys.meshing.prime.PartSummaryParams)(\[model, print\_id, ...\])Parameters to control part summary results.[`PartSummaryResults`](ansys.meshing.prime.PartSummaryResults.md#ansys.meshing.prime.PartSummaryResults)(\[model, message, ...\])Results of part summary.[`PartZonelets`](ansys.meshing.prime.PartZonelets.md#ansys.meshing.prime.PartZonelets)(\[model, part\_id, ...\])A structure containing some or all face zonelet ids available in a part.[`PartialDefeatureParams`](ansys.meshing.prime.PartialDefeatureParams.md#ansys.meshing.prime.PartialDefeatureParams)(\[model, ...\])Parameters for partial defeature operation.[`PeriodicControl`](ansys.meshing.prime.PeriodicControl.md#ansys.meshing.prime.PeriodicControl)(model, id, object\_id, name)Periodic controls provide settings for the recovery of periodic surfaces.[`PeriodicControlParams`](ansys.meshing.prime.PeriodicControlParams.md#ansys.meshing.prime.PeriodicControlParams)(\[model, center, axis, ...\])PeriodicControlParams contains the parameters for periodic surface recovery.[`PeriodicControlSummaryParams`](ansys.meshing.prime.PeriodicControlSummaryParams.md#ansys.meshing.prime.PeriodicControlSummaryParams)(\[model, json\_data\])Parameters used to get size control summary.[`PeriodicControlSummaryResult`](ansys.meshing.prime.PeriodicControlSummaryResult.md#ansys.meshing.prime.PeriodicControlSummaryResult)(\[model, ...\])Results of Periodic control summary.[`PrismControl`](ansys.meshing.prime.PrismControl.md#ansys.meshing.prime.PrismControl)(model, id, object\_id, name)PrismControl allows you to generate prisms.[`PrismControlGrowthParams`](ansys.meshing.prime.PrismControlGrowthParams.md#ansys.meshing.prime.PrismControlGrowthParams)(\[model, ...\])Growth parameters for prism control.[`PrismControlOffsetType`](ansys.meshing.prime.PrismControlOffsetType.md#ansys.meshing.prime.PrismControlOffsetType)(value)Offset type for prism control.[`PrismParams`](ansys.meshing.prime.PrismParams.md#ansys.meshing.prime.PrismParams)(\[model, stair\_step, ...\])Parameters to control prism mesh generation.[`PrismStairStep`](ansys.meshing.prime.PrismStairStep.md#ansys.meshing.prime.PrismStairStep)(\[model, check\_proximity, ...\])Parameters to control prism stairsteping.[`ProximitySizingParams`](ansys.meshing.prime.ProximitySizingParams.md#ansys.meshing.prime.ProximitySizingParams)(\[model, min, max, ...\])Size field using proximity size control computes edge and face sizes in gaps using the specified minimum number of element layers.[`QuadToSpline`](ansys.meshing.prime.QuadToSpline.md#ansys.meshing.prime.QuadToSpline)(model)Converts all-quad mesh to spline.[`QuadToSplineParams`](ansys.meshing.prime.QuadToSplineParams.md#ansys.meshing.prime.QuadToSplineParams)(\[model, ...\])Parameters to control conversion of quadrilateral mesh to spline.[`ReadSizeFieldParams`](ansys.meshing.prime.ReadSizeFieldParams.md#ansys.meshing.prime.ReadSizeFieldParams)(\[model, append, json\_data\])Parameters used to read size field file.[`RefineAtContactsParams`](ansys.meshing.prime.RefineAtContactsParams.md#ansys.meshing.prime.RefineAtContactsParams)(\[model, ...\])Parameters to refine face elements in contact.[`RefineAtContactsResults`](ansys.meshing.prime.RefineAtContactsResults.md#ansys.meshing.prime.RefineAtContactsResults)(\[model, n\_refined, ...\])Results structure associated with refine face elements in contact.[`RefineSplineParams`](ansys.meshing.prime.RefineSplineParams.md#ansys.meshing.prime.RefineSplineParams)(\[model, refine\_flag\_u, ...\])Spline refinement parameters.[`RemoveLabelResults`](ansys.meshing.prime.RemoveLabelResults.md#ansys.meshing.prime.RemoveLabelResults)(\[model, error\_code, ...\])Results associated with the remove label operation.[`RemoveZoneResults`](ansys.meshing.prime.RemoveZoneResults.md#ansys.meshing.prime.RemoveZoneResults)(\[model, error\_code, ...\])Results associated with the remove zone operation.[`RepairEdgesParams`](ansys.meshing.prime.RepairEdgesParams.md#ansys.meshing.prime.RepairEdgesParams)(\[model, ...\])Parameters for repair edges operation.[`RepairTopologyParams`](ansys.meshing.prime.RepairTopologyParams.md#ansys.meshing.prime.RepairTopologyParams)(\[model, connect\_faces, ...\])Parameters for repair topology operations.[`ResolveIntersectionResult`](ansys.meshing.prime.ResolveIntersectionResult.md#ansys.meshing.prime.ResolveIntersectionResult)(\[model, ...\])Result structure associated with resolve intersections operation.[`ResolveIntersectionsParams`](ansys.meshing.prime.ResolveIntersectionsParams.md#ansys.meshing.prime.ResolveIntersectionsParams)(\[model, ...\])ResolveIntersectionsParams define parameters for resolve intersections.[`SFPeriodicParams`](ansys.meshing.prime.SFPeriodicParams.md#ansys.meshing.prime.SFPeriodicParams)(\[model, axis, angle, ...\])Parameters for setting periodic size fields.[`Scaffolder`](ansys.meshing.prime.Scaffolder.md#ansys.meshing.prime.Scaffolder)(model, part\_id)Scaffolder is used for achieving connections in structures made of sheets and beams.[`ScaffolderMergeResults`](ansys.meshing.prime.ScaffolderMergeResults.md#ansys.meshing.prime.ScaffolderMergeResults)(\[model, n\_merged, ...\])Result structure associated with merge overlapping topofaces and delete shadowed topofaces operations.[`ScaffolderParams`](ansys.meshing.prime.ScaffolderParams.md#ansys.meshing.prime.ScaffolderParams)(\[model, absolute\_dist\_tol, ...\])Parameters to control scaffold operation.[`ScaffolderResults`](ansys.meshing.prime.ScaffolderResults.md#ansys.meshing.prime.ScaffolderResults)(\[model, ...\])Results structure associated to scaffold operation.[`ScaffolderSplitResults`](ansys.meshing.prime.ScaffolderSplitResults.md#ansys.meshing.prime.ScaffolderSplitResults)(\[model, new\_faces, ...\])Result structure associated to split topofaces operation.[`ScopeDefinition`](ansys.meshing.prime.ScopeDefinition.md#ansys.meshing.prime.ScopeDefinition)(\[model, entity\_type, ...\])ScopeDefinition to scope entities based on entity and evaluation type.[`ScopeEntity`](ansys.meshing.prime.ScopeEntity.md#ansys.meshing.prime.ScopeEntity)(value)ScopeDefinition uses entity type to scope entities.[`ScopeEvaluationType`](ansys.meshing.prime.ScopeEvaluationType.md#ansys.meshing.prime.ScopeEvaluationType)(value)ScopeDefinition uses evaluation type to evaluate the scope.[`ScopeExpressionType`](ansys.meshing.prime.ScopeExpressionType.md#ansys.meshing.prime.ScopeExpressionType)(value)ScopeExpressionType uses expression type to evaluate the scope.[`ScopeZoneletParams`](ansys.meshing.prime.ScopeZoneletParams.md#ansys.meshing.prime.ScopeZoneletParams)(\[model, json\_data\])Parameters used to get the scoped face or edge zonelets.[`SearchByFoldsParams`](ansys.meshing.prime.SearchByFoldsParams.md#ansys.meshing.prime.SearchByFoldsParams)(\[model, critical\_angle, ...\])Parameters to control fold detection.[`SearchByFoldsResults`](ansys.meshing.prime.SearchByFoldsResults.md#ansys.meshing.prime.SearchByFoldsResults)(\[model, n\_found, ...\])Results structure associated with search folds operation.[`SearchByIntersectionResults`](ansys.meshing.prime.SearchByIntersectionResults.md#ansys.meshing.prime.SearchByIntersectionResults)(\[model, ...\])Results associated with search by face element intersection (face elements interfering with each other).[`SearchByInvalidNormalsResults`](ansys.meshing.prime.SearchByInvalidNormalsResults.md#ansys.meshing.prime.SearchByInvalidNormalsResults)(\[model, ...\])Results structure associated with search invalid normals operation.[`SearchByQualityParams`](ansys.meshing.prime.SearchByQualityParams.md#ansys.meshing.prime.SearchByQualityParams)(\[model, ...\])Parameters to control search by quality results.[`SearchByQualityResults`](ansys.meshing.prime.SearchByQualityResults.md#ansys.meshing.prime.SearchByQualityResults)(\[model, n\_found, ...\])Results of search by quality.[`SearchBySelfIntersectionParams`](ansys.meshing.prime.SearchBySelfIntersectionParams.md#ansys.meshing.prime.SearchBySelfIntersectionParams)(\[model, ...\])Parameters to search by face element intersection.[`SearchBySpikeParams`](ansys.meshing.prime.SearchBySpikeParams.md#ansys.meshing.prime.SearchBySpikeParams)(\[model, spike\_angle, ...\])Parameters to control spike detection.[`SearchBySpikeResults`](ansys.meshing.prime.SearchBySpikeResults.md#ansys.meshing.prime.SearchBySpikeResults)(\[model, n\_found, ...\])Results structure associated with search spikes operation.[`SearchByThinStripParams`](ansys.meshing.prime.SearchByThinStripParams.md#ansys.meshing.prime.SearchByThinStripParams)(\[model, ...\])Parameters to search by thin strip of face elements.[`SearchByThinStripResults`](ansys.meshing.prime.SearchByThinStripResults.md#ansys.meshing.prime.SearchByThinStripResults)(\[model, n\_found, ...\])Results associated with search by thin strip of face elements.[`SearchInfoByRegisterIdParams`](ansys.meshing.prime.SearchInfoByRegisterIdParams.md#ansys.meshing.prime.SearchInfoByRegisterIdParams)(\[model, json\_data\])Parameters to retrieve information on registered faces.[`SearchInfoByRegisterIdResults`](ansys.meshing.prime.SearchInfoByRegisterIdResults.md#ansys.meshing.prime.SearchInfoByRegisterIdResults)(\[model, ...\])Result structure containing information on registered face elements.[`SetContactPreventionsResults`](ansys.meshing.prime.SetContactPreventionsResults.md#ansys.meshing.prime.SetContactPreventionsResults)(\[model, ...\])Results associated with set contact preventions.[`SetFeatureRecoveriesResults`](ansys.meshing.prime.SetFeatureRecoveriesResults.md#ansys.meshing.prime.SetFeatureRecoveriesResults)(\[model, ids, ...\])Results associated with set feature recoveries.[`SetLeakPreventionsResults`](ansys.meshing.prime.SetLeakPreventionsResults.md#ansys.meshing.prime.SetLeakPreventionsResults)(\[model, ...\])Results associated with set leak preventions.[`SetNameResults`](ansys.meshing.prime.SetNameResults.md#ansys.meshing.prime.SetNameResults)(\[model, warning\_code, ...\])Results associated with the set name.[`SetParamsResults`](ansys.meshing.prime.SetParamsResults.md#ansys.meshing.prime.SetParamsResults)(\[model, error\_code, ...\])Results associated with the set parameters operation.[`SetScopeResults`](ansys.meshing.prime.SetScopeResults.md#ansys.meshing.prime.SetScopeResults)(\[model, error\_code, ...\])Results associated with the set scope operation.[`SetSizingResults`](ansys.meshing.prime.SetSizingResults.md#ansys.meshing.prime.SetSizingResults)(\[model, warning\_codes, ...\])Result associated with the different set sizing parameters.[`SizeControl`](ansys.meshing.prime.SizeControl.md#ansys.meshing.prime.SizeControl)(model, id, object\_id, name\[, local\])Compute the size field for a volumetric surface meshing.[`SizeControlSummaryParams`](ansys.meshing.prime.SizeControlSummaryParams.md#ansys.meshing.prime.SizeControlSummaryParams)(\[model, json\_data\])Parameters used to get size control summary.[`SizeControlSummaryResult`](ansys.meshing.prime.SizeControlSummaryResult.md#ansys.meshing.prime.SizeControlSummaryResult)(\[model, message, ...\])Results of size control summary.[`SizeField`](ansys.meshing.prime.SizeField.md#ansys.meshing.prime.SizeField)(model)The size field is computed based on the size control defined.[`SizeFieldFileReadResults`](ansys.meshing.prime.SizeFieldFileReadResults.md#ansys.meshing.prime.SizeFieldFileReadResults)(\[model, ...\])Results of size field file read operation.[`SizeFieldType`](ansys.meshing.prime.SizeFieldType.md#ansys.meshing.prime.SizeFieldType)(value)The type of sizing field to be used to fetch element size at given location.[`SizingType`](ansys.meshing.prime.SizingType.md#ansys.meshing.prime.SizingType)(value)Sizing type decides the type of size control.[`SmoothDihedralFaceNodesParams`](ansys.meshing.prime.SmoothDihedralFaceNodesParams.md#ansys.meshing.prime.SmoothDihedralFaceNodesParams)(\[model, ...\])Parameters to smooth dihedral face nodes.[`SmoothDihedralFaceNodesResults`](ansys.meshing.prime.SmoothDihedralFaceNodesResults.md#ansys.meshing.prime.SmoothDihedralFaceNodesResults)(\[model, ...\])Results structure associated with smooth dihedral face nodes.[`SmoothType`](ansys.meshing.prime.SmoothType.md#ansys.meshing.prime.SmoothType)(value)Indicates the the type of operation to be performed during the smooth dihedral face nodes operation.[`SoftSizingParams`](ansys.meshing.prime.SoftSizingParams.md#ansys.meshing.prime.SoftSizingParams)(\[model, max, growth\_rate, ...\])Size field computed using soft size control enables you to set the maximum size on the scoped zonelets .[`SolverType`](ansys.meshing.prime.SolverType.md#ansys.meshing.prime.SolverType)(value)Type of solver.[`SplineFeatureCaptureType`](ansys.meshing.prime.SplineFeatureCaptureType.md#ansys.meshing.prime.SplineFeatureCaptureType)(value)Options to capture features in spline.[`SplineRefinementType`](ansys.meshing.prime.SplineRefinementType.md#ansys.meshing.prime.SplineRefinementType)(value)Type of spline refinement.[`SplitParams`](ansys.meshing.prime.SplitParams.md#ansys.meshing.prime.SplitParams)(\[model, split\_ratio, json\_data\])Parameters to split face elements at longest edge.[`StitchParams`](ansys.meshing.prime.StitchParams.md#ansys.meshing.prime.StitchParams)(\[model, tolerance, ...\])Parameters used for stitch operation.[`StitchType`](ansys.meshing.prime.StitchType.md#ansys.meshing.prime.StitchType)(value)Stitch type depending on nature of surface boundary edges to be stitched.[`StretchFreeBoundariesParams`](ansys.meshing.prime.StretchFreeBoundariesParams.md#ansys.meshing.prime.StretchFreeBoundariesParams)(\[model, json\_data\])Parameters used for stretch free boundaries operation.[`StretchFreeBoundariesResults`](ansys.meshing.prime.StretchFreeBoundariesResults.md#ansys.meshing.prime.StretchFreeBoundariesResults)(\[model, ...\])Results associated with stretch free boundaries operation.[`SubtractVolumesParams`](ansys.meshing.prime.SubtractVolumesParams.md#ansys.meshing.prime.SubtractVolumesParams)(\[model, ...\])Parameters to control the volume subtract operation.[`SubtractVolumesResults`](ansys.meshing.prime.SubtractVolumesResults.md#ansys.meshing.prime.SubtractVolumesResults)(\[model, error\_code, ...\])Results of the volume subtract operation.[`SubtractZoneletsParams`](ansys.meshing.prime.SubtractZoneletsParams.md#ansys.meshing.prime.SubtractZoneletsParams)(\[model, ...\])Parameters to use when subtracting zonelets.[`SubtractZoneletsResults`](ansys.meshing.prime.SubtractZoneletsResults.md#ansys.meshing.prime.SubtractZoneletsResults)(\[model, ...\])Results structure associated with subtracting zonelets.[`SurfaceDiagnosticSummaryParams`](ansys.meshing.prime.SurfaceDiagnosticSummaryParams.md#ansys.meshing.prime.SurfaceDiagnosticSummaryParams)(\[model, ...\])Parameters to control surface diagnostics summary results.[`SurfaceDiagnosticSummaryResults`](ansys.meshing.prime.SurfaceDiagnosticSummaryResults.md#ansys.meshing.prime.SurfaceDiagnosticSummaryResults)(\[model, ...\])Results of surface diagnostic summary.[`SurfaceFeatureType`](ansys.meshing.prime.SurfaceFeatureType.md#ansys.meshing.prime.SurfaceFeatureType)(value)Type of face edges considered as features.[`SurfaceMeshSizeScaling`](ansys.meshing.prime.SurfaceMeshSizeScaling.md#ansys.meshing.prime.SurfaceMeshSizeScaling)(\[model, factor, ...\])Settings related to scaling of surface mesh size for hexcore refinement.[`SurfaceQualityResult`](ansys.meshing.prime.SurfaceQualityResult.md#ansys.meshing.prime.SurfaceQualityResult)(\[model, ...\])Result of surface quality.[`SurfaceQualitySummaryParams`](ansys.meshing.prime.SurfaceQualitySummaryParams.md#ansys.meshing.prime.SurfaceQualitySummaryParams)(\[model, ...\])Parameters to control surface quality summary results.[`SurfaceQualitySummaryResults`](ansys.meshing.prime.SurfaceQualitySummaryResults.md#ansys.meshing.prime.SurfaceQualitySummaryResults)(\[model, ...\])Results of surface quality summary.[`SurfaceSearch`](ansys.meshing.prime.SurfaceSearch.md#ansys.meshing.prime.SurfaceSearch)(model)SurfaceSearch allows you to check surface mesh quality.[`SurfaceUtilities`](ansys.meshing.prime.SurfaceUtilities.md#ansys.meshing.prime.SurfaceUtilities)(model)Performs various general surface utilities algorithms, such as adding thickness.[`Surfer`](ansys.meshing.prime.Surfer.md#ansys.meshing.prime.Surfer)(model)Generates surface mesh.[`SurferParams`](ansys.meshing.prime.SurferParams.md#ansys.meshing.prime.SurferParams)(\[model, max\_angle, ...\])Parameters used to generate surface mesh.[`SurferResults`](ansys.meshing.prime.SurferResults.md#ansys.meshing.prime.SurferResults)(\[model, error\_code, ...\])Results associated with the surface mesh.[`TetParams`](ansys.meshing.prime.TetParams.md#ansys.meshing.prime.TetParams)(\[model, quadratic, json\_data\])Parameters to control tetrahedral mesh generation.[`ThinStripType`](ansys.meshing.prime.ThinStripType.md#ansys.meshing.prime.ThinStripType)(value)The type to identify strip of face elements as thin strips using shape formed by features around the strip of face elements.[`ThinVolumeControl`](ansys.meshing.prime.ThinVolumeControl.md#ansys.meshing.prime.ThinVolumeControl)(model, id, object\_id, name)ThinVolumeControl allows you to generate prisms in the space between surfaces.[`ThinVolumeMeshParams`](ansys.meshing.prime.ThinVolumeMeshParams.md#ansys.meshing.prime.ThinVolumeMeshParams)(\[model, n\_layers, ...\])Parameters to generate thin volume mesh.[`TopoData`](ansys.meshing.prime.TopoData.md#ansys.meshing.prime.TopoData)(model, id, object\_id, name)Topodata has all information about connectivity of nodes, edges, elements and more.[`TopoFillHoleParams`](ansys.meshing.prime.TopoFillHoleParams.md#ansys.meshing.prime.TopoFillHoleParams)(\[model, ...\])Parameters used to fill holes in topology.[`TopoFillHoleResult`](ansys.meshing.prime.TopoFillHoleResult.md#ansys.meshing.prime.TopoFillHoleResult)(\[model, ...\])Results associated with fill holes in topology operations.[`TopoSearchField`](ansys.meshing.prime.TopoSearchField.md#ansys.meshing.prime.TopoSearchField)(value)Toposearch diagnostic field.[`TopoUtilities`](ansys.meshing.prime.TopoUtilities.md#ansys.meshing.prime.TopoUtilities)(model, part\_id)Performs various general surface utilities algorithms.[`Transform`](ansys.meshing.prime.Transform.md#ansys.meshing.prime.Transform)(model)Provides functionalities to initialize and manage transformation using transformation matrix.[`TransformParams`](ansys.meshing.prime.TransformParams.md#ansys.meshing.prime.TransformParams)(\[model, ...\])Parameters to transform given entities.[`TransformResults`](ansys.meshing.prime.TransformResults.md#ansys.meshing.prime.TransformResults)(\[model, error\_code, json\_data\])Results associated with the transformation.[`VolumeControl`](ansys.meshing.prime.VolumeControl.md#ansys.meshing.prime.VolumeControl)(model, id, object\_id, name\[, ...\])Defines the scope and type of volume mesh to generate.[`VolumeControlParams`](ansys.meshing.prime.VolumeControlParams.md#ansys.meshing.prime.VolumeControlParams)(\[model, ...\])Volume control parameters are used to define the volume type in the volume control.[`VolumeFillType`](ansys.meshing.prime.VolumeFillType.md#ansys.meshing.prime.VolumeFillType)(value)Types of volume fill options.[`VolumeMeshTool`](ansys.meshing.prime.VolumeMeshTool.md#ansys.meshing.prime.VolumeMeshTool)(model)VolumeMeshTool allows you to check grid and improve volume mesh quality.[`VolumeMeshToolResults`](ansys.meshing.prime.VolumeMeshToolResults.md#ansys.meshing.prime.VolumeMeshToolResults)(\[model, error\_code, ...\])Result associated with the volume mesh tool operation.[`VolumeNamingType`](ansys.meshing.prime.VolumeNamingType.md#ansys.meshing.prime.VolumeNamingType)(value)Indicate source types used to name volume zones.[`VolumeQualityResultsPart`](ansys.meshing.prime.VolumeQualityResultsPart.md#ansys.meshing.prime.VolumeQualityResultsPart)(\[model, ...\])Result of volume quality of part.[`VolumeQualitySummaryParams`](ansys.meshing.prime.VolumeQualitySummaryParams.md#ansys.meshing.prime.VolumeQualitySummaryParams)(\[model, ...\])Parameters to control volume quality summary results.[`VolumeQualitySummaryResults`](ansys.meshing.prime.VolumeQualitySummaryResults.md#ansys.meshing.prime.VolumeQualitySummaryResults)(\[model, ...\])Results of volume quality summary.[`VolumeSearch`](ansys.meshing.prime.VolumeSearch.md#ansys.meshing.prime.VolumeSearch)(model)VolumeSearch allows you to check volume mesh quality.[`VolumeSweeper`](ansys.meshing.prime.VolumeSweeper.md#ansys.meshing.prime.VolumeSweeper)(model)VolumeSweeper class provide functions to volume mesh a given set of topovolumes by sweeping or stacking a set of face and edge zonelets.[`VolumetricScaffolderParams`](ansys.meshing.prime.VolumetricScaffolderParams.md#ansys.meshing.prime.VolumetricScaffolderParams)(\[model, ...\])Parameters to control delete shadowed topofaces operation.[`VolumetricSizeFieldComputeParams`](ansys.meshing.prime.VolumetricSizeFieldComputeParams.md#ansys.meshing.prime.VolumetricSizeFieldComputeParams)(\[model, ...\])Parameters associated with the compute volumetric size field operation.[`VolumetricSizeFieldComputeResults`](ansys.meshing.prime.VolumetricSizeFieldComputeResults.md#ansys.meshing.prime.VolumetricSizeFieldComputeResults)(\[model, ...\])Results associated with the compute volumetric size field operation.[`WarningCode`](ansys.meshing.prime.WarningCode.md#ansys.meshing.prime.WarningCode)(value)Warning codes associated with the PyPrimeMesh operation.[`WrapParams`](ansys.meshing.prime.WrapParams.md#ansys.meshing.prime.WrapParams)(\[model, sizing\_method, ...\])WrapParams defines parameters for wrapping.[`WrapRegion`](ansys.meshing.prime.WrapRegion.md#ansys.meshing.prime.WrapRegion)(value)Indicates source type to extract wrapper region.[`WrapResult`](ansys.meshing.prime.WrapResult.md#ansys.meshing.prime.WrapResult)(\[model, warning\_codes, ...\])Result structure associated to Wrap operation.[`Wrapper`](ansys.meshing.prime.Wrapper.md#ansys.meshing.prime.Wrapper)(model)Provides operations for generating a surface mesh using wrapper technology.[`WrapperCloseGapsParams`](ansys.meshing.prime.WrapperCloseGapsParams.md#ansys.meshing.prime.WrapperCloseGapsParams)(\[model, target, ...\])WrapperCloseGapsParams to define parameters for close gaps operation.[`WrapperCloseGapsResult`](ansys.meshing.prime.WrapperCloseGapsResult.md#ansys.meshing.prime.WrapperCloseGapsResult)(\[model, error\_code, ...\])Result structure associated with close gaps operation.[`WrapperControl`](ansys.meshing.prime.WrapperControl.md#ansys.meshing.prime.WrapperControl)(model, id, object\_id, name)Provides all parameters and controls used for wrapping.[`WrapperImproveQualityParams`](ansys.meshing.prime.WrapperImproveQualityParams.md#ansys.meshing.prime.WrapperImproveQualityParams)(\[model, ...\])WrapperImproveQualityParams defines parameters to improve wrapper part.[`WrapperImproveResult`](ansys.meshing.prime.WrapperImproveResult.md#ansys.meshing.prime.WrapperImproveResult)(\[model, error\_code, ...\])Results structure associated to improve quality.[`WriteSizeFieldParams`](ansys.meshing.prime.WriteSizeFieldParams.md#ansys.meshing.prime.WriteSizeFieldParams)(\[model, ...\])Parameters used to write size field file.[`ZoneType`](ansys.meshing.prime.ZoneType.md#ansys.meshing.prime.ZoneType)(value)ZoneType decides the type of zone.[`PrimeRuntimeError`](ansys.meshing.prime.PrimeRuntimeError.md#ansys.meshing.prime.PrimeRuntimeError)(message\[, error\_code, ...\])Provides runtime errors for PyPrimeMesh.[`PrimeRuntimeWarning`](ansys.meshing.prime.PrimeRuntimeWarning.md#ansys.meshing.prime.PrimeRuntimeWarning)(message)Provides the runtime warning for PyPrimeMesh.