## On this page

  

 

 # RAFiveRollsBeltProfile

 Last update: 17.07.2025 

<a id="generated.RAFiveRollsBeltProfile"></a>

### *class* RAFiveRollsBeltProfile

Rocky API for a Five Rolls Belt Profile model.

**Methods:**

NameDescription[`DisableUse0223RatioForRollLengths`](#generated.RAFiveRollsBeltProfile.DisableUse0223RatioForRollLengths)()Set the value of "Use 0223 Ratio For Roll Lengths" to False.[`EnableUse0223RatioForRollLengths`](#generated.RAFiveRollsBeltProfile.EnableUse0223RatioForRollLengths)()Set the value of "Use 0223 Ratio For Roll Lengths" to True.[`GetAvailableMaterials`](#generated.RAFiveRollsBeltProfile.GetAvailableMaterials)()Get all available Materials.[`GetCenterRollLength`](#generated.RAFiveRollsBeltProfile.GetCenterRollLength)(\[unit\])Get the value of "Center Roll Length".[`GetLastRollAngle`](#generated.RAFiveRollsBeltProfile.GetLastRollAngle)(\[unit\])Get the value of "Last Roll Angle".[`GetLowerCornerRadius`](#generated.RAFiveRollsBeltProfile.GetLowerCornerRadius)(\[unit\])Get the value of "Lower Corner Radius".[`GetMaterial`](#generated.RAFiveRollsBeltProfile.GetMaterial)()Get the "Material".[`GetSideRollLength`](#generated.RAFiveRollsBeltProfile.GetSideRollLength)(\[unit\])Get the value of "Side Roll Length".[`GetTroughingAngle`](#generated.RAFiveRollsBeltProfile.GetTroughingAngle)(\[unit\])Get the value of "Troughing Angle".[`GetUpperCornerRadius`](#generated.RAFiveRollsBeltProfile.GetUpperCornerRadius)(\[unit\])Get the value of "Upper Corner Radius".[`GetUse0223RatioForRollLengths`](#generated.RAFiveRollsBeltProfile.GetUse0223RatioForRollLengths)()Get the value of "Use 0223 Ratio For Roll Lengths".[`IsUse0223RatioForRollLengthsEnabled`](#generated.RAFiveRollsBeltProfile.IsUse0223RatioForRollLengthsEnabled)()Check if the "Use 0223 Ratio For Roll Lengths" is enabled.[`SetCenterRollLength`](#generated.RAFiveRollsBeltProfile.SetCenterRollLength)(value\[, unit\])Set the value of "Center Roll Length".[`SetLastRollAngle`](#generated.RAFiveRollsBeltProfile.SetLastRollAngle)(value\[, unit\])Set the value of "Last Roll Angle".[`SetLowerCornerRadius`](#generated.RAFiveRollsBeltProfile.SetLowerCornerRadius)(value\[, unit\])Set the value of "Lower Corner Radius".[`SetMaterial`](#generated.RAFiveRollsBeltProfile.SetMaterial)(value)Set the "Material".[`SetSideRollLength`](#generated.RAFiveRollsBeltProfile.SetSideRollLength)(value\[, unit\])Set the value of "Side Roll Length".[`SetTroughingAngle`](#generated.RAFiveRollsBeltProfile.SetTroughingAngle)(value\[, unit\])Set the value of "Troughing Angle".[`SetUpperCornerRadius`](#generated.RAFiveRollsBeltProfile.SetUpperCornerRadius)(value\[, unit\])Set the value of "Upper Corner Radius".[`SetUse0223RatioForRollLengths`](#generated.RAFiveRollsBeltProfile.SetUse0223RatioForRollLengths)(value)Set the value of "Use 0223 Ratio For Roll Lengths".<a id="generated.RAFiveRollsBeltProfile.DisableUse0223RatioForRollLengths"></a>

#### DisableUse0223RatioForRollLengths()

Set the value of “Use 0223 Ratio For Roll Lengths” to False.

<a id="generated.RAFiveRollsBeltProfile.EnableUse0223RatioForRollLengths"></a>

#### EnableUse0223RatioForRollLengths()

Set the value of “Use 0223 Ratio For Roll Lengths” to True.

<a id="generated.RAFiveRollsBeltProfile.GetAvailableMaterials"></a>

#### GetAvailableMaterials()

Get all available Materials.

- **Return type:**List\[[`RASolidMaterial`](RASolidMaterial.md#generated.RASolidMaterial)\] A list of [`RASolidMaterial`](RASolidMaterial.md#generated.RASolidMaterial).

<a id="generated.RAFiveRollsBeltProfile.GetCenterRollLength"></a>

#### GetCenterRollLength(unit: Optional\[str\] = None)

Get the value of “Center Roll Length”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “m”.

<a id="generated.RAFiveRollsBeltProfile.GetLastRollAngle"></a>

#### GetLastRollAngle(unit: Optional\[str\] = None)

Get the value of “Last Roll Angle”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “rad”.

<a id="generated.RAFiveRollsBeltProfile.GetLowerCornerRadius"></a>

#### GetLowerCornerRadius(unit: Optional\[str\] = None)

Get the value of “Lower Corner Radius”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “m”.

<a id="generated.RAFiveRollsBeltProfile.GetMaterial"></a>

#### GetMaterial()

Get the “Material”.

- **Return type:**[`RASolidMaterial`](RASolidMaterial.md#generated.RASolidMaterial)

<a id="generated.RAFiveRollsBeltProfile.GetSideRollLength"></a>

#### GetSideRollLength(unit: Optional\[str\] = None)

Get the value of “Side Roll Length”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “m”.

<a id="generated.RAFiveRollsBeltProfile.GetTroughingAngle"></a>

#### GetTroughingAngle(unit: Optional\[str\] = None)

Get the value of “Troughing Angle”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “dega”.

<a id="generated.RAFiveRollsBeltProfile.GetUpperCornerRadius"></a>

#### GetUpperCornerRadius(unit: Optional\[str\] = None)

Get the value of “Upper Corner Radius”.

- **Parameters:****unit** – The unit for the returned value. If no unit is provided, the returned value will be in “m”.

<a id="generated.RAFiveRollsBeltProfile.GetUse0223RatioForRollLengths"></a>

#### GetUse0223RatioForRollLengths()

Get the value of “Use 0223 Ratio For Roll Lengths”.

<a id="generated.RAFiveRollsBeltProfile.IsUse0223RatioForRollLengthsEnabled"></a>

#### IsUse0223RatioForRollLengthsEnabled()

Check if the “Use 0223 Ratio For Roll Lengths” is enabled.

<a id="generated.RAFiveRollsBeltProfile.SetCenterRollLength"></a>

#### SetCenterRollLength(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Center Roll Length”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “m”.

<a id="generated.RAFiveRollsBeltProfile.SetLastRollAngle"></a>

#### SetLastRollAngle(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Last Roll Angle”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “rad”.

<a id="generated.RAFiveRollsBeltProfile.SetLowerCornerRadius"></a>

#### SetLowerCornerRadius(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Lower Corner Radius”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “m”.

<a id="generated.RAFiveRollsBeltProfile.SetMaterial"></a>

#### SetMaterial(value)

Set the “Material”.

:param unicode, [`RASolidMaterial`](RASolidMaterial.md#generated.RASolidMaterial) value: : Either the API object wrapping the desired entity or its name.

<a id="generated.RAFiveRollsBeltProfile.SetSideRollLength"></a>

#### SetSideRollLength(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Side Roll Length”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “m”.

<a id="generated.RAFiveRollsBeltProfile.SetTroughingAngle"></a>

#### SetTroughingAngle(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Troughing Angle”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “dega”.

<a id="generated.RAFiveRollsBeltProfile.SetUpperCornerRadius"></a>

#### SetUpperCornerRadius(value: Union\[str, float\], unit: Optional\[str\] = None)

Set the value of “Upper Corner Radius”.

- **Parameters:**
    - **value** – The value to set. This value can be an expression with input variables or float type.
    - **unit** – The unit for value. If no unit is provided, value is assumed to be in “m”.

<a id="generated.RAFiveRollsBeltProfile.SetUse0223RatioForRollLengths"></a>

#### SetUse0223RatioForRollLengths(value: bool)

Set the value of “Use 0223 Ratio For Roll Lengths”.

- **Parameters:****value** – The value to set.