`MaximumPrincipalStress`

class Ansys.ACT.Automation.Mechanical.Results.StressResults.MaximumPrincipalStress

Bases: object

Defines a MaximumPrincipalStress.

Overview

Methods

Name	Description
Activate	Activate the current object.
AddAlert	Creates a new Alert
AddComment	Creates a new child Comment.
AddConvergence	Creates a new Convergence
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
BodyWhereMaximumOccurs	Gets the body that has the maximum result value.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	CreateParameter method.
CreateResultsAtAllSets	Creates results at all sets for results under a solution.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
ExportToTextFile	Run the ExportToTextFile action.
FetchRemoteResults	Run the FetchRemoteResult action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PromoteToNamedSelection	Run the PromoteToNamedSelection action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
RetrieveResult	Evaluates the individual result without evaluating all the results in the same solution.

Properties

Name	Description
Amplitude	Gets or sets the Amplitude.
Average	Gets the Average.
AverageAcrossBodies	Gets or sets the AverageAcrossBodies.
AverageRadiusOfCurvature	Gets or sets the AverageRadiusOfCurvature.
BendingInside	Gets the BendingInside.
BendingOutside	Gets the BendingOutside.
By	Gets or sets the By.
CalculateTimeHistory	Gets or sets the CalculateTimeHistory.
Children	Gets the list of children.
CombinationNumber	Gets or sets the Combination Number for a Solution Combination result.
Comments	Gets the list of associated comments.
CoordinateSystem	Gets or sets the Coordinate System.
CrackFrontNumber	Gets or sets the CrackFrontNumber.
CyclicMode	Gets or sets the CyclicMode.
DataModelObjectCategory	Gets the current DataModelObject's category.
DisplayOption	Gets or sets the DisplayOption.
DisplayTime	Gets or sets the DisplayTime.
DpfEvaluation	Gets or sets the DpfEvaluation.
EnvironmentSelection	Gets or sets the EnvironmentSelection.
Figures	Gets the list of associated figures.
Frequency	Gets or sets the Frequency.
GlobalIDs	Gets or sets the GlobalIDs.
GraphControlsXAxis	Gets or sets the GraphControlsXAxis.
HarmonicIndex	Gets or sets the HarmonicIndex.
Identifier	Gets or sets the Identifier.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IsSolved	Gets the IsSolved.
ItemType	Gets or sets the ItemType.
IterationNumber	Gets the IterationNumber.
IterationStep	Gets or sets the IterationStep.
Layer	Gets or sets the Layer.
Linearized2DBehavior	Gets or sets the Linearized2DBehavior.
LoadMultiplier	Gets the LoadMultiplier.
LoadStep	Gets the LoadStep.
LoadStepForMaximumOfMaximumValues	Get the Load Step for the maximum of maximum values.
LoadStepForMaximumOfMinimumValues	Get the Load Step for the maximum of minimum values.
LoadStepForMinimumOfMaximumValues	Get the Load Step for the minimum of maximum values.
LoadStepForMinimumOfMinimumValues	Get the Load Step for the minimum of minimum values.
LoadStepNumber	Gets or sets the LoadStepNumber.
Location	Gets or sets the Location.
Maximum	Gets the Maximum.
MaximumOccursOn	Gets the MaximumOccursOn.
MaximumOfMaximumOverTime	Gets the MaximumOfMaximumOverTime.
MaximumOfMinimumOverTime	Gets the MaximumOfMinimumOverTime.
Membrane	Gets the Membrane.
MembraneBendingCenter	Gets the MembraneBendingCenter.
MembraneBendingInside	Gets the MembraneBendingInside.
MembraneBendingOutside	Gets the MembraneBendingOutside.
Minimum	Gets the Minimum.
MinimumOccursOn	Gets the MinimumOccursOn.
MinimumOfMaximumOverTime	Gets the MinimumOfMaximumOverTime.
MinimumOfMinimumOverTime	Gets the MinimumOfMinimumOverTime.
Mode	Gets or sets the Mode.
NamedSelections	Gets or sets the NamedSelections.
NormalOrientation	Gets or sets the NormalOrientation.
Path	Path property.
PeakCenter	Gets the PeakCenter.
PeakInside	Gets the PeakInside.
PeakOutside	Gets the PeakOutside.
PhaseIncrement	Gets or sets the PhaseIncrement.
Plies	Plies property.
PlotData	Gets the result table.
Ply	Gets or sets the Ply selection.
Position	Gets or sets the Position.
Probability	Gets the Probability.
Properties	Gets the list of properties for this object.
RPMSelection	Gets or sets the RPM Selection value at which the results are evaluated.
ReportedFrequency	Gets the ReportedFrequency.
SaveAuxiliaryResult	Gets or sets the option to save auxiliary results to disk. This property is valid for results under Modal and Harmonic analyses with On Demand Expansion enabled. An exception is thrown otherwise.
ScaleFactor	Gets or sets the ScaleFactor.
ScopingMethod	Gets or sets the ScopingMethod.
SetNumber	Gets or sets the Set Number.
SolutionCombinationDriver	Gets or sets the SolutionCombinationDriver.
SolverComponentIDs	Gets or sets the SolverComponentIDs.
StressStrainType	Gets or sets the StressStrainType.
SubScopeBy	Gets or sets the SubScopeBy.
Substep	Gets the Substep.
Subtype	Gets or sets the Subtype.
Suppressed	Gets or sets the Suppressed.
Surface	Surface property.
SurfaceCoating	SurfaceCoating property.
SweepingPhase	Gets or sets the SweepingPhase.
ThroughThicknessBendingStress	Gets or sets the ThroughThicknessBendingStress.
Time	Gets the Time.
TimeForMaximumOfMaximumValues	Get the Time for the maximum of maximum values.
TimeForMaximumOfMinimumValues	Get the Time for the maximum of minimum values.
TimeForMinimumOfMaximumValues	Get the Time for the minimum of maximum values.
TimeForMinimumOfMinimumValues	Get the Time for the minimum of minimum values.
Total	Gets the Total.
TotalCenter	Gets the TotalCenter.
TotalInside	Gets the TotalInside.
TotalOutside	Gets the TotalOutside.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property MaximumPrincipalStress.Amplitude : bool | None

Gets or sets the Amplitude.

property MaximumPrincipalStress.Average : Ansys.Core.Units.Quantity | None

Gets the Average.

property MaximumPrincipalStress.AverageAcrossBodies : bool | None

Gets or sets the AverageAcrossBodies.

property MaximumPrincipalStress.AverageRadiusOfCurvature : Ansys.Core.Units.Quantity | None

Gets or sets the AverageRadiusOfCurvature.

property MaximumPrincipalStress.BendingInside : Ansys.Core.Units.Quantity | None

Gets the BendingInside.

property MaximumPrincipalStress.BendingOutside : Ansys.Core.Units.Quantity | None

Gets the BendingOutside.

property MaximumPrincipalStress.By : Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property MaximumPrincipalStress.CalculateTimeHistory : bool | None

Gets or sets the CalculateTimeHistory.

property MaximumPrincipalStress.Children : List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property MaximumPrincipalStress.CombinationNumber : int | None

Gets or sets the Combination Number for a Solution Combination result.

property MaximumPrincipalStress.Comments : Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property MaximumPrincipalStress.CoordinateSystem : Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property MaximumPrincipalStress.CrackFrontNumber : int | None

Gets or sets the CrackFrontNumber.

property MaximumPrincipalStress.CyclicMode : int | None

Gets or sets the CyclicMode.

property MaximumPrincipalStress.DataModelObjectCategory : Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property MaximumPrincipalStress.DisplayOption : Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None

Gets or sets the DisplayOption.

property MaximumPrincipalStress.DisplayTime : Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property MaximumPrincipalStress.DpfEvaluation : Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property MaximumPrincipalStress.EnvironmentSelection : Ansys.ACT.Automation.Mechanical.Analysis | None

Gets or sets the EnvironmentSelection.

property MaximumPrincipalStress.Figures : Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property MaximumPrincipalStress.Frequency : Ansys.Core.Units.Quantity | None

Gets or sets the Frequency.

property MaximumPrincipalStress.GlobalIDs : str | None

Gets or sets the GlobalIDs.

property MaximumPrincipalStress.GraphControlsXAxis : Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None

Gets or sets the GraphControlsXAxis.

property MaximumPrincipalStress.HarmonicIndex : int | None

Gets or sets the HarmonicIndex.

property MaximumPrincipalStress.Identifier : str | None

Gets or sets the Identifier.

property MaximumPrincipalStress.Images : Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property MaximumPrincipalStress.InternalObject : Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None

Gets the internal object. For advanced usage only.

property MaximumPrincipalStress.IsSolved : bool | None

Gets the IsSolved.

property MaximumPrincipalStress.ItemType : Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None

Gets or sets the ItemType.

property MaximumPrincipalStress.IterationNumber : int | None

Gets the IterationNumber.

property MaximumPrincipalStress.IterationStep : int | None

Gets or sets the IterationStep.

property MaximumPrincipalStress.Layer : int | None

Gets or sets the Layer.

property MaximumPrincipalStress.Linearized2DBehavior : Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None

Gets or sets the Linearized2DBehavior.

property MaximumPrincipalStress.LoadMultiplier : float | None

Gets the LoadMultiplier.

property MaximumPrincipalStress.LoadStep : int | None

Gets the LoadStep.

property MaximumPrincipalStress.LoadStepForMaximumOfMaximumValues : int | None

Get the Load Step for the maximum of maximum values.

property MaximumPrincipalStress.LoadStepForMaximumOfMinimumValues : int | None

Get the Load Step for the maximum of minimum values.

property MaximumPrincipalStress.LoadStepForMinimumOfMaximumValues : int | None

Get the Load Step for the minimum of maximum values.

property MaximumPrincipalStress.LoadStepForMinimumOfMinimumValues : int | None

Get the Load Step for the minimum of minimum values.

property MaximumPrincipalStress.LoadStepNumber : int | None

Gets or sets the LoadStepNumber.

property MaximumPrincipalStress.Location : Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property MaximumPrincipalStress.Maximum : Ansys.Core.Units.Quantity | None

Gets the Maximum.

property MaximumPrincipalStress.MaximumOccursOn : str | None

Gets the MaximumOccursOn.

property MaximumPrincipalStress.MaximumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMaximumOverTime.

property MaximumPrincipalStress.MaximumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MaximumOfMinimumOverTime.

property MaximumPrincipalStress.Membrane : Ansys.Core.Units.Quantity | None

Gets the Membrane.

property MaximumPrincipalStress.MembraneBendingCenter : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingCenter.

property MaximumPrincipalStress.MembraneBendingInside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingInside.

property MaximumPrincipalStress.MembraneBendingOutside : Ansys.Core.Units.Quantity | None

Gets the MembraneBendingOutside.

property MaximumPrincipalStress.Minimum : Ansys.Core.Units.Quantity | None

Gets the Minimum.

property MaximumPrincipalStress.MinimumOccursOn : str | None

Gets the MinimumOccursOn.

property MaximumPrincipalStress.MinimumOfMaximumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMaximumOverTime.

property MaximumPrincipalStress.MinimumOfMinimumOverTime : Ansys.Core.Units.Quantity | None

Gets the MinimumOfMinimumOverTime.

property MaximumPrincipalStress.Mode : int | None

Gets or sets the Mode.

property MaximumPrincipalStress.NamedSelections : Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets or sets the NamedSelections.

property MaximumPrincipalStress.NormalOrientation : Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None

Gets or sets the NormalOrientation.

property MaximumPrincipalStress.Path : Ansys.ACT.Automation.Mechanical.Path | None

Path property.

property MaximumPrincipalStress.PeakCenter : Ansys.Core.Units.Quantity | None

Gets the PeakCenter.

property MaximumPrincipalStress.PeakInside : Ansys.Core.Units.Quantity | None

Gets the PeakInside.

property MaximumPrincipalStress.PeakOutside : Ansys.Core.Units.Quantity | None

Gets the PeakOutside.

property MaximumPrincipalStress.PhaseIncrement : Ansys.Core.Units.Quantity | None

Gets or sets the PhaseIncrement.

property MaximumPrincipalStress.Plies : Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None

Plies property.

property MaximumPrincipalStress.PlotData : Ansys.Mechanical.DataModel.Results.ResultDataTable | None

Gets the result table.

property MaximumPrincipalStress.Ply : Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None

Gets or sets the Ply selection.

property MaximumPrincipalStress.Position : Ansys.Mechanical.DataModel.Enums.ShellFaceType | None

Gets or sets the Position.

property MaximumPrincipalStress.Probability : float | None

Gets the Probability.

property MaximumPrincipalStress.Properties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property MaximumPrincipalStress.RPMSelection : Ansys.Core.Units.Quantity | None

Gets or sets the RPM Selection value at which the results are evaluated.

property MaximumPrincipalStress.ReportedFrequency : Ansys.Core.Units.Quantity | None

Gets the ReportedFrequency.

property MaximumPrincipalStress.SaveAuxiliaryResult : bool | None

Gets or sets the option to save auxiliary results to disk. This property is valid for results under Modal and Harmonic analyses with On Demand Expansion enabled. An exception is thrown otherwise. Saving result data to disk improves result retrieval and display performance. Note: The project file size will increase.

property MaximumPrincipalStress.ScaleFactor : Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None

Gets or sets the ScaleFactor.

property MaximumPrincipalStress.ScopingMethod : Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property MaximumPrincipalStress.SetNumber : int | None

Gets or sets the Set Number.

property MaximumPrincipalStress.SolutionCombinationDriver : Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None

Gets or sets the SolutionCombinationDriver.

property MaximumPrincipalStress.SolverComponentIDs : str | None

Gets or sets the SolverComponentIDs.

property MaximumPrincipalStress.StressStrainType : Ansys.Mechanical.DataModel.Enums.StressStrainType | None

Gets or sets the StressStrainType.

property MaximumPrincipalStress.SubScopeBy : Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None

Gets or sets the SubScopeBy.

property MaximumPrincipalStress.Substep : int | None

Gets the Substep.

property MaximumPrincipalStress.Subtype : Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None

Gets or sets the Subtype.

property MaximumPrincipalStress.Suppressed : bool | None

Gets or sets the Suppressed.

property MaximumPrincipalStress.Surface : Ansys.ACT.Automation.Mechanical.Surface | None

Surface property.

property MaximumPrincipalStress.SurfaceCoating : Ansys.ACT.Automation.Mechanical.SurfaceCoating | None

SurfaceCoating property.

property MaximumPrincipalStress.SweepingPhase : Ansys.Core.Units.Quantity | None

Gets or sets the SweepingPhase.

property MaximumPrincipalStress.ThroughThicknessBendingStress : Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None

Gets or sets the ThroughThicknessBendingStress.

property MaximumPrincipalStress.Time : Ansys.Core.Units.Quantity | None

Gets the Time.

property MaximumPrincipalStress.TimeForMaximumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of maximum values.

property MaximumPrincipalStress.TimeForMaximumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the maximum of minimum values.

property MaximumPrincipalStress.TimeForMinimumOfMaximumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of maximum values.

property MaximumPrincipalStress.TimeForMinimumOfMinimumValues : Ansys.Core.Units.Quantity | None

Get the Time for the minimum of minimum values.

property MaximumPrincipalStress.Total : Ansys.Core.Units.Quantity | None

Gets the Total.

property MaximumPrincipalStress.TotalCenter : Ansys.Core.Units.Quantity | None

Gets the TotalCenter.

property MaximumPrincipalStress.TotalInside : Ansys.Core.Units.Quantity | None

Gets the TotalInside.

property MaximumPrincipalStress.TotalOutside : Ansys.Core.Units.Quantity | None

Gets the TotalOutside.

property MaximumPrincipalStress.VisibleProperties : tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

MaximumPrincipalStress.Activate() → None

Activate the current object.

MaximumPrincipalStress.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert

Creates a new Alert

MaximumPrincipalStress.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

MaximumPrincipalStress.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence

Creates a new Convergence

MaximumPrincipalStress.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

MaximumPrincipalStress.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MaximumPrincipalStress.BodyWhereMaximumOccurs() → Ansys.ACT.Automation.Mechanical.Body

Gets the body that has the maximum result value.
Throws an exception if body not found.

MaximumPrincipalStress.ClearGeneratedData() → None

Run the ClearGeneratedData action.

MaximumPrincipalStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

MaximumPrincipalStress.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

CreateParameter method.

MaximumPrincipalStress.CreateResultsAtAllSets() → List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]

Creates results at all sets for results under a solution.

MaximumPrincipalStress.Delete() → None

Run the Delete action.

MaximumPrincipalStress.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

MaximumPrincipalStress.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Run the DuplicateWithoutResults action.

MaximumPrincipalStress.EvaluateAllResults() → None

Run the EvaluateAllResults action.

MaximumPrincipalStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None

Run the ExportAnimation action.

MaximumPrincipalStress.ExportToTextFile(filePath: str) → None

Run the ExportToTextFile action.

MaximumPrincipalStress.FetchRemoteResults() → None

Run the FetchRemoteResult action.

MaximumPrincipalStress.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

MaximumPrincipalStress.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

MaximumPrincipalStress.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

MaximumPrincipalStress.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

MaximumPrincipalStress.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]

Run the PromoteToNamedSelection action.

MaximumPrincipalStress.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MaximumPrincipalStress.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

MaximumPrincipalStress.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

MaximumPrincipalStress.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

MaximumPrincipalStress.RetrieveResult() → None

Evaluates the individual result without evaluating all the results in the same solution.