ErrorCode

class ansys.meshing.prime.ErrorCode(*values)

Error codes associated with the failure of PyPrimeMesh operation.

Methods

Name	Description
`ErrorCode.conjugate`	Returns self, the complex conjugate of any int.
`ErrorCode.bit_length`(/)	Number of bits necessary to represent self in binary.
`ErrorCode.bit_count`(/)	Number of ones in the binary representation of the absolute value of self.
`ErrorCode.to_bytes`(/[, length, byteorder, ...])	Return an array of bytes representing an integer.
`ErrorCode.from_bytes`(/, bytes[, byteorder, ...])	Return the integer represented by the given array of bytes.
`ErrorCode.as_integer_ratio`(/)	Return a pair of integers, whose ratio is equal to the original int.
`ErrorCode.is_integer`(/)	Returns True.

Attributes

Name	Description
`ErrorCode.real`	the real part of a complex number
`ErrorCode.imag`	the imaginary part of a complex number
`ErrorCode.numerator`	the numerator of a rational number in lowest terms
`ErrorCode.denominator`	the denominator of a rational number in lowest terms
`ErrorCode.NOERROR`	No error.
`ErrorCode.UNKNOWN`	Unknown error.
`ErrorCode.SIGSEGV`	Segmentation violation.
`ErrorCode.SURFERFAILED`	Surface meshing failed.
`ErrorCode.TOPOFACESREMESHFAILED`	Failed to remesh topofaces.
`ErrorCode.TOPOEDGESREMESHFAILED`	Failed to remesh topoedges.
`ErrorCode.SURFERLAYEREDQUADFAILED`	Failed to layer quad meshing.
`ErrorCode.SURFERINVALIDINPUT`	Invalid input for surface meshing.
`ErrorCode.SURFERQUADFAILED`	Quad surface meshing failed.
`ErrorCode.FACEZONELETSFEATURESNOTUPTODATE`	Face zonelets features are not up to date.
`ErrorCode.SURFERAUTOSIZEQUADUNSUPPORTED`	Auto sizing for quad meshing is not supported.
`ErrorCode.SURFERAUTOSIZEMUSTBEVOLUMETRIC`	Auto sizing must be of volumetric type.
`ErrorCode.SURFERNONMANIFOLDEDGE`	Non manifold edge for meshing.
`ErrorCode.SURFEROPENINITIALFRONTLOOP`	Open initial front loop for meshing.
`ErrorCode.FREEZEMESHERROR`	Cannot remesh freezed mesh.
`ErrorCode.REMESHFACEZONELETSNOTSUPPORTEDFORTOPOLOGYPART`	Remesh face zonelets is not supported for topology part.
`ErrorCode.REMESHFACEZONELETSLOCALLYNOTSUPPORTEDFORTOPOLOGYPART`	Remesh face zonelets locally is not supported for topology part.
`ErrorCode.SURFERINVALIDCONSTANTSIZE`	Invalid size for constant size surface meshing.
`ErrorCode.SURFERINVALIDMINORMAXSIZES`	Invalid min or max size for surface meshing.
`ErrorCode.SURFERINVALIDANGLES`	Invalid Corner angle or min angle more than max angle specified for surface meshing.
`ErrorCode.SMOOTHSIZETRANSITIONNOTSUPPORTEDFORTOPO`	Smooth size transition option is not supported for topology surface meshing yet.
`ErrorCode.LOCALSURFERINVALIDNUMRINGS`	Invalid number of rings input for the local surface mesh operation.
`ErrorCode.SURFERCANNOTREMESHPERIODICZONELETS`	Cannot remesh periodic face zonelets.
`ErrorCode.SUBTRACTVOLUMEFAILED`	Failed to subtract volumes.
`ErrorCode.INTERSECTIONINTARGETVOLUMES`	Found overlapping or intersecting target volumes.
`ErrorCode.INTERSECTIONINCUTTERVOLUMES`	Found overlapping or intersecting cutter volumes.
`ErrorCode.SCAFFOLDERBADINPUTEMPTYTOPO`	Incorrect input.
`ErrorCode.SCAFFOLDERBADINPUTNOFREEFACES`	Incorrect input.
`ErrorCode.SCAFFOLDERBADINPUTPARAMS`	Incorrect input parameters.
`ErrorCode.SCAFFOLDERINVALIDABSOLUTEDISTOL`	Invalid absolute distance tolerance for scaffold operation.
`ErrorCode.SCAFFOLDERINVALIDCONSTANTMESHSIZE`	Invalid constant mesh size input for scaffold operation.
`ErrorCode.SHELLBLFAILED`	ShellBL creation failed.
`ErrorCode.SHELLBLQUADS`	ShellBL quads.
`ErrorCode.SHELLBLNOMESH`	ShellBL is not supported for unmeshed topofaces.
`ErrorCode.SHELLBLFEWLAYERS`	Only few ShellBL layers are created.
`ErrorCode.SHELLBLWRONGTOPO`	Found topofaces with invalid topology.
`ErrorCode.OGRIDREFINEFAILED`	Post refinement of ShellBl quads failed.
`ErrorCode.SPLITTOTRIFAILED`	ShellBL quads split to triangles failed.
`ErrorCode.INVALIDSHELLBLCONTROLS`	Invalid ShellBL controls.
`ErrorCode.INVALIDSHELLBLCONTROLS_INCORRECTSCOPEENTITY`	Invalid scope entity.
`ErrorCode.PERIODICEDGESNOTSUPPORTEDFORSHELLBL`	Periodic surfaces selected for ShellBL generation are not supported.
`ErrorCode.AUTOMESHFAILED`	Auto meshing failed.
`ErrorCode.AITOVERLAPALONGMULTIFOUND`	Topology identification failed because of overlapping faces.
`ErrorCode.TRIANGULATIONFAILED`	Triangulation failed.
`ErrorCode.DUPLICATENODESFOUND`	Duplicate nodes found.
`ErrorCode.EDGEINTERSECTINGFACEFOUND`	Edge intersecting face found.
`ErrorCode.DUPLICATEFACESFOUND`	Duplicate faces found.
`ErrorCode.TETIMPROVEFAILED`	Tet improve failed.
`ErrorCode.AUTONODEMOVEFAILED`	Auto node move failed.
`ErrorCode.ALREADYVOLUMEMESHED`	Volume is already meshed.
`ErrorCode.INVALIDPRISMCONTROLS`	Invalid prism controls.
`ErrorCode.VOLUMESNOTUPTODATE`	Volumes are not updated.
`ErrorCode.QUADRATICMESHSUPPORTEDONLYFORTETS`	Quadratic elements can only be generated for tetrahedral elements.
`ErrorCode.NOACTIVESFFOUND`	No active size fields found.
`ErrorCode.AUTOMESHINVALIDMAXSIZE`	Invalid max size for auto volume meshing.
`ErrorCode.AUTOMESHHEXCOREFAILED`	Hex generation part of volume meshing failed.
`ErrorCode.INVALIDVOLUMECONTROLS`	Invalid volume controls specified for volume meshing.
`ErrorCode.SOURCEFACINGCELLZONELETS`	Source face zonelets facing existing volume mesh.
`ErrorCode.TARGETWITHCELLZONELETS`	Target face zonelets with volume mesh on both side.
`ErrorCode.SIDEZONELETSNOTFIT`	Side face zonelets are not sweepable for thin volume mesh.
`ErrorCode.SOURCETARGETZONELETSNOTFIT`	Source and target zonelets do not fit to thin volume mesh.
`ErrorCode.INVALIDPRISMCONTROLS_INCORRECTSCOPEENTITY`	Invalid scope entity.
`ErrorCode.INVALIDFIRSTASPECTRATIO`	Invalid first aspect ratio.
`ErrorCode.INVALIDLASTASPECTRATIO`	Invalid last aspect ratio.
`ErrorCode.INVALIDFIRSTHEIGHT`	Invalid first height.
`ErrorCode.INVALIDLAYERS`	Invalid number of layers.
`ErrorCode.INVALIDGROWTHRATE`	Invalid growth rate.
`ErrorCode.COMPUTEVOLUMESFAILED`	Compute volumes failed.
`ErrorCode.QUADRATICTETNOTSUPPORTEDINPARALLEL`	Quadratic tetrahedal meshing is not supported in parallel mode.
`ErrorCode.QUADRATICTETNOTSUPPORTEDWITHPRISMS`	Quadratic tetrahedral meshing is not supported with prism.
`ErrorCode.EXTRACTVOLUMESFAILED`	Extract volumes failed.
`ErrorCode.MERGEVOLUMESFAILED`	Merge volumes failed.
`ErrorCode.DELETEVOLUMESFAILED`	Delete volumes failed.
`ErrorCode.PERIODICSURFACESNOTSUPPORTEDFORPRISMS`	Periodic surfaces selected for prism generation are not supported.
`ErrorCode.INVALIDNEIGHBORVOLUMES`	Invalid neighbor volumes selected to merge volumes.
`ErrorCode.THINVOLUMEMESHFAILED`	Thin volume meshing failed.
`ErrorCode.PRISMMESHFAILED`	Prism meshing failed.
`ErrorCode.AUTOMESHINITFAILED`	Auto mesh initialization failed.
`ErrorCode.POLYMESHFAILED`	Poly meshing failed.
`ErrorCode.PYRAMIDMESHFAILED`	Pyramid meshing failed.
`ErrorCode.DELETEMESHFAILED`	Deleting mesh failed.
`ErrorCode.INCREMENTALVOLUMEMESHINGNOTSUPPORTED`	Incremental volume meshing is not supported.
`ErrorCode.TOPOFACESPLITNOTSUPPORTED`	ComputeTopoVolumes and ExtractTopoVolumes do not support topoface split.
`ErrorCode.OUTOFMEMORY`	Out of memory.
`ErrorCode.INTERRUPTED`	Method call interrupted.
`ErrorCode.GETSTATISTICSFAILED`	Failed to get mesh statistics.
`ErrorCode.GETELEMENTCOUNTFAILED`	Failed to get element count.
`ErrorCode.PARTNOTFOUND`	Given part not found.
`ErrorCode.TOPODATANOTFOUND`	TopoData not found.
`ErrorCode.SIZEFIELDNOTFOUND`	Size field not found.
`ErrorCode.ZONESARENOTOFSAMETYPE`	Zones are not of same type.
`ErrorCode.PARTNOTMESHED`	Part is not meshed.
`ErrorCode.INVALIDINPUTPART`	Invalid input part.
`ErrorCode.CADGEOMETRYNOTFOUND`	No CAD Geometry found for projections.
`ErrorCode.VOLUMENOTFOUND`	Volumes not found.
`ErrorCode.ZONENOTFOUND`	Given zone not found.
`ErrorCode.ENTITIESSHOULDBEADDEDTOZONEUSINGPARTITBELONGS`	Entities should be added to zone using part it belongs.
`ErrorCode.PARTDOESNOTHAVETOPOLOGY`	Part does not have topology.
`ErrorCode.ZONESARENOTSUPPORTEDFORCELLZONELETS`	Zones are not supported for cell zonelets.
`ErrorCode.SPHEREATINVALIDNORMALNODESFAILED`	Sphere creation at invalid normals failed.
`ErrorCode.PROJECTONCADGEOMETRYFAILED`	Projection on CAD Geometry failed.
`ErrorCode.SEPARATIONRESULTSFAILED`	Separation failed.
`ErrorCode.ZONELETSARENOTOFSAMEDIMENSION`	Zonelets are not of same dimension.
`ErrorCode.ADDTHICKNESSRESULTSFAILED`	Adding thickness failed.
`ErrorCode.BOIRESULTSFAILED`	BOI creation failed.
`ErrorCode.CREATEBOI_INVALIDSCALE`	BOI creation failed.
`ErrorCode.CREATEBOI_INVALIDFLOWDIRECTION`	BOI creation failed.
`ErrorCode.CREATEBOI_IVALIDWRAPMESHSIZE`	BOI creation failed.
`ErrorCode.CREATEBOI_INVALIDWAKELEVELS`	BOI creation failed.
`ErrorCode.CREATEBOI_INVALIDTYPEFORWRAP`	BOI creation failed.
`ErrorCode.CREATEBOI_INVALIDSCOPE`	BOI creation failed.
`ErrorCode.CREATECONTACTPATCH_INVALIDOFFSETDISTANCE`	Contact patch creation process failed.
`ErrorCode.CREATECONTACTPATCH_INVALIDTOLERANCEVALUE`	Contact patch creation process failed.
`ErrorCode.CREATECONTACTPATCH_INVALIDCONTACTPATCHAXIS`	Contact patch creation process failed.
`ErrorCode.CONTACTPATCHRESULTSFAILED`	Contact patch creation process failed.
`ErrorCode.SIZEFIELDCOMPUTATIONFAILED`	Size field computation failed.
`ErrorCode.INVALIDSIZECONTROLS`	Invalid size controls.
`ErrorCode.REFRESHSIZEFIELDSFAILED`	Refreshing size field failed.
`ErrorCode.READMESHFAILED`	Reading mesh file failed.
`ErrorCode.WRITEMESHFAILED`	Writing mesh file failed.
`ErrorCode.CADIMPORTFAILED`	CAD import failed.
`ErrorCode.READSIZEFIELDFAILED`	Reading size field file failed.
`ErrorCode.READCDBFAILED`	Reading CDB file failed.
`ErrorCode.WRITECDBFAILED`	Writing CDB file failed.
`ErrorCode.PATHNOTFOUND`	Invalid path.
`ErrorCode.READKEYWORDFILEFAILED`	Reading LS-Dyna Keyword file failed.
`ErrorCode.WRITEKEYWORDFILEFAILED`	Writing LS-Dyna Keyword file failed.
`ErrorCode.QUADRATICMESH_WRITEMESHFAILED`	Writing failed with quadratic mesh.
`ErrorCode.INCLUDEKFILENOTFOUND`	Include keyword file not found.
`ErrorCode.READSIZECONTROLFAILED`	Reading size control file failed.
`ErrorCode.WRITESIZECONTROLFAILED`	Writing size control file failed.
`ErrorCode.FILENOTFOUND`	File path or name not found.
`ErrorCode.READPMDATFAILED`	PMDAT file read failed.
`ErrorCode.EXPORTFLUENTCASEFAILED`	Export fluent case failed.
`ErrorCode.VOLUMEZONESNOTFOUNDTOEXPORTFLUENTCASE`	Volume zones are not found to export fluent case.
`ErrorCode.IMPORTFLUENTMESHINGMSHFAILED`	Failed to import fluent meshing mesh file.
`ErrorCode.IMPORTFLUENTCASEFAILED`	Failed to import fluent case file.
`ErrorCode.WRITEPMDATFAILED`	Failed to write PMDAT file.
`ErrorCode.EXPORTFLUENTMESHINGMSHFAILED`	Export fluent meshing mesh failed.
`ErrorCode.WRITESIZEFIELDFAILED`	Writing size field failed.
`ErrorCode.MESHNOTFOUNDTOEXPORTFLUENTMESHINGMESH`	Mesh not found to export fluent meshing mesh.
`ErrorCode.EXPORTSTLFAILED`	Export STL failed.
`ErrorCode.EXPORTSTLFAILEDWITHTOPOLOGY`	Export STL not supported for part with topology data.
`ErrorCode.EXPORTSTLFAILEDWITHQUADFACES`	Export STL not supported for mesh with quad faces.
`ErrorCode.EXPORTSTLFAILEDWITHPOLYFACES`	Export STL not supported for mesh with poly faces.
`ErrorCode.EXPORTSTLFAILEDWITHHIGHERORDERMESH`	Export STL not supported for higher order mesh.
`ErrorCode.EXPORTSTLFAILEDWITHEMPTYPARTIDLIST`	Export STL failed.
`ErrorCode.EXPORTSTLFAILEDWITHINCORRECTPARTID`	Export STL failed.
`ErrorCode.SHELLBLCONTROLFAILED`	Write ShellBL control failed.
`ErrorCode.READSHELLBLCONTROLFAILED`	Read thin ShellBL control failed.
`ErrorCode.FUSEOPTIONINVALID`	Invalid option chosen to connect two different parts.
`ErrorCode.COLOCATEFUSEDNODESFAILED`	Colocation of fused nodes failed.
`ErrorCode.IMPRINTBOUNDARYNODESFAILED`	Imprint of boundary nodes failed.
`ErrorCode.IMPRINTBOUNDARYEDGESFAILED`	Imprint of boundary edges failed.
`ErrorCode.SPLITINTERSECTINGBOUNDARYEDGESFAILED`	Splitting of intersecting boundary edges failed.
`ErrorCode.FUSEINTERIORFAILED`	Fusing interior region of overlap failed.
`ErrorCode.TOLERANCEVALUEINVALID`	Invalid tolerance value specified.
`ErrorCode.SOURCEORTARGETNOTSPECIFIED`	No target or source faces specified.
`ErrorCode.STITCHWITHPRESERVEDENTITIESFAILED`	Stitch with preserved entities failed.
`ErrorCode.STITCHENTITIESFAILED`	Stitch entities failed.
`ErrorCode.NOTSUPPORTEDFORTOPOLOGYPART`	Not supported for part with topology data.
`ErrorCode.NOTSUPPORTEDFORHIGHERORDERMESHPART`	Operation does not support higher order elements.
`ErrorCode.NOTSUPPORTEDFORNONTRIFACEZONE`	Only triangular face zone is supported.
`ErrorCode.NOTSUPPORTEDFORNONQUADFACEZONE`	Operation supports only quads.
`ErrorCode.ADDINGPROVIDEDENTITIESNOTSUPPORTEDFORTOPOLOGYPART`	Adding provided entities is not supported for part with topology data.
`ErrorCode.MERGEZONELETSNOTSUPPORTEDFORTOPOLOGYPART`	Merge zonelets is not supported for part with topology data.
`ErrorCode.MERGEVOLUMESNOTSUPPORTEDFORTOPOLOGYPART`	Merge volumes is not supported for part with topology data.
`ErrorCode.NOTSUPPORTEDFORPOLYMESHPART`	Operation does not support poly elements.
`ErrorCode.MERGEPARTSFAILED`	Merge parts failed.
`ErrorCode.MERGEPARTSWANDWOTOPO`	Merge parts with topology and parts without topology are not supported.
`ErrorCode.SETNAMEFAILED`	Set name failed.
`ErrorCode.CONTROLNOTFOUND`	Control not found.
`ErrorCode.NOINPUT`	No input provided.
`ErrorCode.DELETEPARTSFAILED`	Delete parts failed.
`ErrorCode.DELETECONTROLSFAILED`	Delete controls failed.
`ErrorCode.INPUTNOTCOMPLETE`	Input provided is incomplete.
`ErrorCode.INVALIDINPUTZONELETS`	Invalid input zonelets.
`ErrorCode.MERGEZONELETSFAILED`	Merge zonelets failed.
`ErrorCode.MERGESMALLZONELETSSUPPORTEDFORFACEZONELETS`	Merge small zonelets option is supported for only face zonelets.
`ErrorCode.INVALIDINPUTVOLUMES`	List of volume ids provided is empty or incorrect.
`ErrorCode.MORPHER_COMPUTEBCS`	Failed to compute boundary conditions.
`ErrorCode.MATCHMORPH_INVALIDSOURCEINPUT`	Invalid source input for match morphing.
`ErrorCode.MATCHMORPH_BCPAIRINPUTTYPEMISMATCH`	Entity type does not match with input for defined boundary condition pair.
`ErrorCode.INVALIDGLOBALMINMAX`	Invalid global min and max value.
`ErrorCode.INVALIDSIZECONTROLINPUTS`	Invalid size control input.
`ErrorCode.INVALIDSIZECONTROLSCOPE`	Invalid size control scope.
`ErrorCode.INVALIDCURVATURESIZINGINPUT`	Invalid curvature sizing input.
`ErrorCode.INVALIDPROXIMITYSIZINGINPUT`	Invalid proximity sizing input.
`ErrorCode.INVALIDSCOPEENTITYTYPEINPUT`	Invalid input scope entity type.
`ErrorCode.EXTRACTFEATURESBYANGLEFAILED`	Feature extraction by angle failed.
`ErrorCode.EXTRACTFEATURESBYEDGESFAILED`	Extracting features by angle failed.
`ErrorCode.CREATEEDGEZONELETFAILED`	Creating edge zonelet failed.
`ErrorCode.EXTRACTFEATURESBYINTERSECTIONFAILED`	Feature extraction by intersection failed.
`ErrorCode.VOLUMEMESH_MIDNODESNOTSUPPORTED`	Mid side nodes are not supported.
`ErrorCode.VOLUMEMESHNOTFOUND`	Volume mesh not found.
`ErrorCode.PREPAREFORVOLUMEMESHINGFAILED`	Prepare for volume meshing failed.
`ErrorCode.NOTSUPPORTEDFORDISTRIBUTEMESHING`	Method not supported for distributed meshing.
`ErrorCode.SPLITANDCOLLAPSEFACEELEMENTSFAILED`	Failed to split and collapse face element(s).
`ErrorCode.IMPROVESURFACEMESHQUALITYFAILED`	Improve surface mesh quality failed.
`ErrorCode.REMOVECUSPSFAILED`	Cusp removal failed.
`ErrorCode.NOTSUPPORTEDFORREMOVECUSPS`	Parts with multiple volumes do not support Cusp removal.
`ErrorCode.IGA_NURBSOPFAILED`	Spline operation failed.
`ErrorCode.IGA_INCORRECTCONTROLPOINTSIZEWRTDEGREE`	Incorrect control point size with respect to degree.
`ErrorCode.IGA_INCORRECTCONTROLPOINTSIZEWRTINPUT`	Incorrect control point size with respect to mesh size.
`ErrorCode.IGA_NURBSFITTINGFAILED`	Spline fitting failed.
`ErrorCode.IGA_NEGATIVEJACOBIAN`	Spline has negative jacobian.
`ErrorCode.IGA_PERIODICKNOTVECTORCONVERSIONFAILED`	Periodic knot conversion of spline failed.
`ErrorCode.IGA_HREFINEMENTFAILED`	H-refinement of spline failed.
`ErrorCode.IGA_PREFINEMENTFAILED`	P-refinement of spline failed.
`ErrorCode.IGA_NURBSSMOOTHFAILED`	Smoothing of spline failed.
`ErrorCode.IGA_NODEINDEXINGFAILED`	Hex mesh is unstructured.
`ErrorCode.IGA_NOCELLZONELETS`	No cell zonelets found.
`ErrorCode.IGA_INVALIDINPUTFILEFORSTRUCTUREDHEXMESHFITTING`	Invalid model for structured hex-mesh spline fitting.
`ErrorCode.IGA_INVALIDINPUTFILEFORGENUSZEROFITTING`	Invalid model for genus-zero spline fitting.
`ErrorCode.IGA_NOFACEZONELETS`	No face zonelets found.
`ErrorCode.IGA_EDGEPATHCOMPUTATIONFAILED`	Edge path computation failed.
`ErrorCode.IGA_INCORRECTDEGREE`	Incorrect degree.
`ErrorCode.IGA_QUADRATICMESHINPUT`	Quadratic mesh is not supported for solid spline creation.
`ErrorCode.IGA_UNIFORMTRIMMEDNURBSFAILED`	Uniform trimmed spline creation failed.
`ErrorCode.IGA_QUADTOSPLINEBASISFAILED`	Quad to spline operation failed.
`ErrorCode.MULTIZONEMESHER_INVALIDPRISMPARAMETERS`	The prism parameters for MultiZone are invalid.
`ErrorCode.MULTIZONEMESHER_GEOMETRYTRANSFERFAILED`	Geometry import of prime topology failed.
`ErrorCode.MULTIZONEMESHER_BLOCKINGFAILED`	Creating MultiZone blocking failed.
`ErrorCode.MULTIZONEMESHER_PRISMMESHINGFAILED`	Creating MultiZone boundary layers failed.
`ErrorCode.MULTIZONEMESHER_MESHINGFAILED`	Generating MultiZone mesh failed.
`ErrorCode.MULTIZONEMESHER_MESHTRANSFERFAILED`	MultiZone mesh transfer failed.
`ErrorCode.MULTIZONEMESHER_USERINPUTTOPOLOGYMISSING`	Input does not have topology for MultiZone mesh.
`ErrorCode.MULTIZONEMESHER_MULTIPLECONTROLSNOTSUPPORTED`	MultiZone mesh does not support multiple controls.
`ErrorCode.MULTIZONEMESHER_NOVOLUMESFORGEOMETRYTRANSFER`	No volumes for geometry import.
`ErrorCode.MULTIZONEMESHER_NOVOLUMESSCOPEDINCURRENTPART`	No volumes for geometry import in the current part.
`ErrorCode.PARTHASTOPOLOGY`	Part has a topology.
`ErrorCode.SURFACESEARCHFAILED`	Surface search failed.
`ErrorCode.SURFACESEARCHPARTWITHMESHNOTFOUND`	Part with mesh not found for surface quality check.
`ErrorCode.INVALIDPLANEPOINTS`	Invalid plane points, cannot define a plane.
`ErrorCode.PLANECOLLINEARPOINTS`	Collinear or duplicate points given to define plane.
`ErrorCode.INVALIDREGISTERID`	Invalid register id provided.
`ErrorCode.SURFACEFEATURETYPENOTSUPPORTED`	Surface search for provided feature type is not supported.
`ErrorCode.VOLUMESEARCHPARTWITHMESHNOTFOUND`	Part with mesh not found for volume quality check.
`ErrorCode.VOLUMESEARCHFAILED`	Volume search failed.
`ErrorCode.INVALIDCELLQUALITYLIMIT`	Invalid cell quality limit.
`ErrorCode.FILLHOLEFAILED`	Unable to create capping surface.
`ErrorCode.SUBTRACTZONELETSFAILED`	Unable to subtract cutters from input zonelets.
`ErrorCode.CREATECAPONFACEZONELETSFAILED`	Failed to create cap on face zonelets.
`ErrorCode.UNITEZONELETSFAILED`	Failed to unite input zonelets.
`ErrorCode.REFINEATCONTACTSFAILED`	Failed to refine at contacts.
`ErrorCode.RECOVERPERIODICSURFACESFAILED`	Unable to recover periodic surfaces.
`ErrorCode.RECOVERPERIODICSURFACESINVALIDSCOPE`	Invalid scope input for periodic surface recovery.
`ErrorCode.CHECKPERIODICPAIRSFAILED`	Could not find a matching periodic face pair.
`ErrorCode.PERIODICSURFACESEDGESMISMATCH`	Edge entities do not match on periodic source and target surfaces.
`ErrorCode.PERIODICRECOVERYFORALREADYVOLUMEMESHEDPART`	Periodic recovery unsupported for already volume meshed part.
`ErrorCode.TRANSFORMATIONFAILED`	Transformation failed.
`ErrorCode.SCALINGFAILED`	Scaling failed.
`ErrorCode.ALIGNMENTFAILED`	Alignment failed.
`ErrorCode.INVALIDTRANSFORMATIONMATRIX`	Invalid transformation matrix.
`ErrorCode.DELETEMESHFACESFAILED`	Delete Mesh faces failed
`ErrorCode.DELETEMESHFACES_TOPOLOGYNOTSUPPORTED`	Topoentities do not support deleting faces.
`ErrorCode.DELETEMESHFACES_CELLFOUND`	Deleting faces failed as they have cell neighbors.
`ErrorCode.DELETEFRINGESANDOVERLAPSFAILED`	Deleting fringes and overlaps failed.
`ErrorCode.DELETEZONELETSCONNECTEDTOCELLS`	Cannot delete zonelets connected to volume mesh.
`ErrorCode.DELETEZONELETSFAILED`	Delete zonelets failed.
`ErrorCode.MATERIALPOINTWITHSAMENAMEEXISTS`	Material point with the same name already exists.
`ErrorCode.MATERIALPOINTWITHGIVENNAMEDOESNTEXIST`	Material point with the given name does not exist.
`ErrorCode.MATERIALPOINTWITHGIVENIDDOESNTEXIST`	Material point with the given ID already exists.
`ErrorCode.OCTREELIMITREACHED`	Limit reached for the number of octants supported.
`ErrorCode.WRAPPERGLOBALSETTINGSNOTSET`	Global settings for wrapper not set.
`ErrorCode.WRAPPERRESOLVEINTERSECTIONFAILED`	Resolving intersections failed for wrapper.
`ErrorCode.WRAPPERCONNECTFAILED`	Wrapper connect failed.
`ErrorCode.WRAPPERCOULDNOTEXTRACTINTERFACE`	Failed to extract wrapper interface.
`ErrorCode.WRAPPERLEAKPREVENTIONFAILED`	Wrapper leak prevention failed.
`ErrorCode.WRAPPERUNSUPPORTEDWRAPREGION`	Wrap region option provided does not support wrap operation.
`ErrorCode.WRAPPERCONTROL_NOLIVEMATERIALPOINTSPROVIDED`	Live material points list provided for wrapper control is empty.
`ErrorCode.WRAPPERSURFACEHASHOLES`	Wrapper surface has holes.
`ErrorCode.WRAPPEROCTREEREGIONINGFAILED`	Octree regioning failed.
`ErrorCode.WRAPPERPROJECTIONFAILED`	Projection failed for wrapper.
`ErrorCode.WRAPPERCONTROL_MATERIALPOINTWITHGIVENNAMEDOESNTEXIST`	Live material point added to wrapper control doesn't exist.
`ErrorCode.WRAPPERCONTROL_LIVEMATERIALPOINTDOESNTEXIST`	Live material point does not exist for wrapper.
`ErrorCode.WRAPPERSIZINGMETHODNOTSUPPORTED`	Sizing method is not supported for wrapper.
`ErrorCode.WRAPPERIMPROVEFAILED`	Wrapper improve quality failed.
`ErrorCode.WRAPPERSIZEFIELDSNOTDEFINED`	No size field ids provided for wrapping.
`ErrorCode.WRAPPERCONTROL_INVALIDGEOMETRYSCOPE`	Geometry scope specified under wrapper control is invalid.
`ErrorCode.WRAPPERCONTROL_INVALIDCONTACTPREVENTIONCONTROLID`	Contact prevention specified under wrapper control doesn't exist.
`ErrorCode.WRAPPERCONTROL_INVALIDCONTACTPREVENTIONCONTROLINPUTS`	Contact prevention control specified under wrapper is invalid.
`ErrorCode.WRAPPERCONTROL_INVALIDLEAKPREVENTIONID`	Leak prevention specified under wrapper control doesn't exist.
`ErrorCode.WRAPPERCONTROL_INVALIDLEAKPREVENTIONCONTROLINPUTS`	Leak prevention control specified under wrapper is invalid.
`ErrorCode.WRAPPERCONTROL_INVALIDFEATURERECOVERYCONTROLID`	Feature recovery control specified under wrapper control doesn't exist.
`ErrorCode.WRAPPERCONTROL_LEAKPREVENTIONMPTCANNOTBELIVE`	Dead material point cannot be same as live.
`ErrorCode.INVALIDWRAPPERCONTROL`	Invalid wrapper control.
`ErrorCode.WRAPPERCLOSEGAPS_INVALIDGAPSIZE`	Gap size specified for patching should be positive double.
`ErrorCode.WRAPPERCLOSEGAPS_INVALIDSCOPE`	Scope specified for close gaps is invalid.
`ErrorCode.WRAPPERCLOSEGAPSFAILED`	Wrapper gap closing failed.
`ErrorCode.WRAPPERCLOSEGAPS_INVALIDRESOLUTIONFACTOR`	Resolution Factor should be greater than 0 but less than or equal to 1.
`ErrorCode.WRAPPERLEAKINGFLUIDREGIONS`	Two or more fluid regions leaking into each other.
`ErrorCode.WRAPPERPATCHFLOWREGIONS_INVALIDHOLESIZE`	Hole size specified for dead region should be positive double.
`ErrorCode.WRAPPERPATCHFLOWREGIONS_FAILED`	Unable to create patch surfaces.
`ErrorCode.WRAPPERPATCHFLOWREGIONS_TOOSMALLHOLESIZE`	Too small hole size provided for dead region.
`ErrorCode.WRAPPERPATCHFLOWREGIONS_INVALIDBASESIZE`	Base size specified for patching should be positive double.
`ErrorCode.WRAPPERPATCHFLOWREGIONS_EMPTYORINVALIDINPUT`	Empty or invalid input face zonelet ids.
`ErrorCode.VT_INVALIDINPUT`	Invalid input provided for VT operation.
`ErrorCode.VT_MERGEFACESFAILED`	Merge faces operation failed.
`ErrorCode.VT_MERGETHINSTRIPESFAILED`	Merge thin stripes operation failed.
`ErrorCode.VT_MERGETHINEXTFAILED`	Merge thin extensions operation failed.
`ErrorCode.VT_REPAIRSHARPCORNERANGLESFAILED`	Repair sharp corner angles operation failed.
`ErrorCode.VT_PINCHFACESFAILED`	Pinch faces operation failed.
`ErrorCode.VT_FILLHOLEFAILED`	Fill hole operation failed.
`ErrorCode.VT_FILLANNULARHOLEFAILED`	Fill annular hole operation failed.
`ErrorCode.VT_COLLAPSESHORTEDGESFAILED`	Collapse short edges operation failed.
`ErrorCode.VT_SEPARATEFACESFAILED`	Separate faces operation failed.
`ErrorCode.VT_CREATELEADINGEDGEFAILED`	Create leading edge operation failed.
`ErrorCode.VT_CREATEMIDEDGEFAILED`	Create mid edge operation failed.
`ErrorCode.VT_OPERATIONFAILED`	VT operation failed.
`ErrorCode.JSONKEYNOTFOUND`	JSON key not found.
`ErrorCode.NUMENMETHODNOTFOUND`	Could not find numen method.
`ErrorCode.CELLSEPARATIONFAILED`	Cell separation failed.
`ErrorCode.NOCELLSSEPARATED`	No cells separated based on given input.
`ErrorCode.SIZEFIELDTYPENOTSUPPORTED`	Provided Size Field Type is not supported by this operation.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORPMDAT`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORFLUENTMESHINGMESH`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORFLUENTCASE`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORKEYWORDFILE`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORFLUENTSIZEFIELD`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORSIZEFIELD`	Provided file extension is not supported.
`ErrorCode.UNSUPPORTEDFILEEXTENSIONFORMAPDLCDB`	Provided file extension is not supported.
`ErrorCode.INVALIDFILEEXTENSIONFORFLUENTCASEEXPORT`	Provided file extension is invalid.
`ErrorCode.PLUGINLOADFAILURE`	Failed to load Surface Editor plugin.
`ErrorCode.TARGETZONELETS_SELFINTERSECTING`	Target zonelets form a self intersecting volume.
`ErrorCode.TARGETZONELETS_NOTWATERTIGHT`	Target zonelets do not form a watertight volume.
`ErrorCode.TOOLZONELETS_SELFINTERSECTING`	Tool zonelets form a self intersecting volume.
`ErrorCode.TOOLZONELETS_NOTWATERTIGHT`	Tool zonelets do not form a watertight volume.
`ErrorCode.STACKER_INVALIDINPUTVOLUMES`	Invalid input volumes provided to stacker.
`ErrorCode.STACKER_INVALIDPARAMS`	Invalid parameters provided to stacker.
`ErrorCode.STACKER_FACESEPARATIONFAILED`	Stacker failed to separate base face.
`ErrorCode.STACKER_FAILED`	Stacker failed to mesh the model.
`ErrorCode.STACKER_NOFACEFOUNDINVOLUMES`	No faces are found in the specified volumes.
`ErrorCode.STACKER_MESHEDFACESFOUND`	Some faces in the input model have existing mesh.
`ErrorCode.STACKER_INVALIDBASEFACEINPUT`	Base face list input is invalid.
`ErrorCode.STACKER_NONSTACKABLEVOLUMESFOUND`	Some volumes are not aligned in the stacking direction.
`ErrorCode.STACKER_INCORRECTBODYDEFINITION`	Some bodies are intersecting or incorrectly defined.
`ErrorCode.STACKER_BASEFACEUNMESHED`	Base face list input has unmeshed topofaces.
`ErrorCode.FACEZONELETSHAVECELLSCONNECTED`	Face zonelets have cells connected.
`ErrorCode.INVALIDTHINVOLUMECONTROLS`	Invalid input provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDSOURCESCOPE`	Invalid source scope provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDTARGETSCOPE`	Invalid target scope provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDSCOPE`	Same source and target scope provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDSOURCESCOPEENTITY`	Invalid source scope entity provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDTARGETSCOPEENTITY`	Invalid target scope entity provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDNUMBEROFLAYER`	Invalid number of layers provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLTOPOLOGYNOTSUPPORTED`	Thin volume mesh controls not supported for part with topology data.
`ErrorCode.THINVOLUMECONTROLINVALIDVOLUMESCOPE`	Invalid volume scope provided for thin volume control.
`ErrorCode.THINVOLUMECONTROLINVALIDCONTROL`	Same face scope is set as target for multiple thin volume controls.
`ErrorCode.THINVOLUMECONTROLSAMESOURCEFORMORETHANTWOCONTROL`	Same face scope is set as source for more than two thin volume controls.
`ErrorCode.THINVOLUMEMESHNOTSUPPORTEDWITHFACEBASEDDATABASE`	Thin volume mesh is not supported with face based database.
`ErrorCode.INVALIDCONTROLPARAMS`	Invalid control parameters.
`ErrorCode.MICROSTRUCTUREINVALIDELEMENTTYPE`	Invalid input provided.
`ErrorCode.MICROSTRUCTUREINVALIDSHAPETYPE`	Invalid input provided.
`ErrorCode.MICROSTRUCTUREWRONGAPICALLSEQUENCE`	Wrong API call sequence.
`ErrorCode.MICROSTRUCTUREBADSHAPEPROPERTIES`	Bad shape properties.
`ErrorCode.MICROSTRUCTURESMOOTHNOTSUPPORTED`	Smoothing operation is not supported.
`ErrorCode.MICROSTRUCTUREREMESHNOTSUPPORTED`	Surface remesh operation is not supported.
`ErrorCode.MICROSTRUCTUREQUADRATICHEXREQUIREDQUADRATICVOXELGRID`	Volume mesh generation for hexahedra requires generation of a quadratic voxel grid.
`ErrorCode.AUTOQUADMESHER_NEGATIVEINPUTPARAMETER`	Autoquadmesher error codes.
`ErrorCode.AUTOQUADMESHER_INVALIDMINMAXSIZES`	Difference in maximum value and minimum value is negative.
`ErrorCode.INVALIDINPUTPOINT`	Invalid input point.
`ErrorCode.IMPORTABAQUSFAILEDWITHUNKNOWNERROR`	Import Abaqus failed.
`ErrorCode.IMPORTABAQUSFAILEDWITHPARSINGFAILURE`	Import Abaqus failed.
`ErrorCode.IMPORTABAQUSFAILEDDURINGMESHCREATION`	Import Abaqus failed.
`ErrorCode.ZEROELEMENTSREADFROMCDBFILE`	No elements read from CDB file.
`ErrorCode.ZERONODESREADFROMCDBFILE`	No nodes read from CDB file.
`ErrorCode.INVALIDCMBLOCKFORMAT`	CMBLOCK command format error in CDB file.
`ErrorCode.ZEROELEMENTSFORCDBEXPORT`	No elements found for cdb export.
`ErrorCode.MESHDECOUPLEDFAILED`	Invalid load balancing or failed in volume meshing for one or more parts.

Prime Mesh Python client library 2026 R1

class ansys.meshing.prime.ErrorCode(*values)

Methods

Attributes

Connect with Ansys