Namespace VM.Managed.DAFUL.Car
Last update: 16.07.2025Namespaces
VM.Managed.DAFUL.Car.Operation
Classes
The acceleration configuration class
AnalysisStaticLoad.AligningTorque
The aligning torque class
The 3D road analysis class
The acceleration analysis class
The car analysis base class
The braking analysis class
The braking-in-turn analysis class
AnalysisConstantRadiusCornering
The constant radius cornering analysis class
AnalysisCorneringWithSteerRelease
The cornering with steer release analysis class
The drift analysis class
The extern file analysis class
The file driven class
The fish-hook analysis class
The handling steady single analysis class
This class is to represent the analysis information.
The vibration analysis class
This struct is to represent the analysis information.
The frequency analysis class
The ISO lane change analysis class
The impulse steer analysis class
This struct is to represent the analysis information.
The Judder analysis class
The lift-off-turn-in analysis class
The opposite travel analysis class
The parallel travel analysis class
The power-off cornering analysis class
The power=off straight line analysis class
The ramp steer analysis class
The random motion analysis class
The ride drum analysis class
The ride general analysis class
The roll vertical analysis class
The Shimmy analysis class
The single-lane change analysis class
The single travel analysis class
The static load analysis class
The handling steady batch analysis class
The handling steady single analysis class
The steer analysis base class
The steering analysis class
The step steer analysis class
The swept-sine steer analysis class
The handling transient batch analysis class
The handling transient single analysis class
The anti roll bar subsystem document
Apply parameter Operation
The body subsystem document
The break-system subsystem document
The braking configuration class
AnalysisStaticLoad.BrakingForce
The braking force class
The braking in turn configuration class
CADOperation
The cleat shape base class
ConstantRadiusCorneringConfiguration
The constant radius cornering configuration class
The analysis base class for cornering
AnalysisStaticLoad.CorneringForce
The cornering force class
CorneringWithSteerReleaseConfiguration
The cornering with steer release configuration class
The analysis base class for cource
CreateGroup Implementation.
AnalysisStaticLoad.DamageForce
The damage force class
AnalysisStaticLoad.DamageRadius
The damage radius class
The car analysis document create information
DocCreateFourPostTestRigAnalysisInfo
The tire testrig analysis document create information
The full car analysis document create information
DocCreateFullCarAnalysisInfoExceptWheel
The full car analysis document create information except wheel
The half car analysis document create information
DocCreateShimmyJudderTestRigAnalysisInfo
The tire testrig analysis document create information
DocCreateTireTestrigAnalysisInfo
The tire testrig analysis document create information
The suspension subsystem document creation information class.
The drift configuration class
The drive-line subsystem document
The experiment information class
The external files configuration class
The file driven configuration class
The fish hook configuration class
The FourPost analysis base class
FourPostAnalysisConfigurationBase
The 4-Post analysis configuration base class
FourPostRideSimulationConfiguration
The 4-Post Test Rig configuration class
The 4-Post Test rig subsystem documet
FourPostVibrationSimulationConfiguration
The 4-Post Vibration configuration class
The full car analysis base class
FullCarAnalysisConfigurationBase
The full car analysis configuration base class
The full car test rig subsystem documet
The ISO lane change configuration class
The impulse steer configuration class
This interface is to represent interface manager for car.
This class is to represent the simulation configuration for Judder.
The lift off turn in configuration class
The car load case base class
MinorRole Implementation.
The open loop steering analysis base class
OppositeWheelTravelConfiguration
The opposite wheel travel configuration class
The toe-camber orientation class
AnalysisStaticLoad.OverturningTorque
The overturning torque class
ParallelWheelTravelConfiguration
The parallel wheel travel configuration class
PowerOffCorneringConfiguration
The power off cornering in configuration class
PowerOffStraightLineConfiguration
The power off straight line configuration class
The power-train subsystem document
The ramp steer configuration class
The random motion configuration class
The rectangle cleat shape class
The rectangle with bevel edge cleat shape class
The ride drum configuration class
The ride general configuration class
AnalysisStaticLoad.RollResTorque
The roll res torque class
RollVerticalForceConfiguration
The roll and vertical force configuration class
The semi-circle cleat shape class
CADOperation.SetMinorRoleForInterfaceOp
SetInterfaceNamesOp
This class is to represent the setting for car configuration.
The Shimmy-Judder analysis base class
ShimmyJudderAnalysisConfigurationBase
This base class is to represent the simulation configuration for Shimmy-Judder.
The Shimmy-Judder test rig documet
This class is to represent the simulation configuration for Shimmy.
The single lane change configuration class
SingleWheelTravelConfiguration
The single wheel travel configuration class
The static load configuration class
AnalysisStaticLoad.StaticRoadBaseInfo
The aligning torque class
The steady batch configuration class
The steady single configuration class
The steering configuration class
The steering subsystem documet class
The step steer configuration class
The analysis base class for straight line
The suspension car analysis base class
SuspensionAnalysisConfigurationBase
The suspension analysis configuration base class
The suspension subsystem document.
The suspension car load case class
SuspensionLoadCase.SuspensionMode
Suspension mode class
SuspensionSimulationConfiguration
The suspension simulation configuration class
The swept sine steer configuration class
The test rig subsystem documet
The test rig subsystem documet base
ThreeDimensionRoadConfiguration
The 3D road configuration class
The tire analysis base class
The tire analysis configuration base class
The tire test rig subsystem documet
AnalysisStaticLoad.TractionForce
The traction force class
The transient batch configuration class
The transient single configuration class
The trapezoid cleat shape class
The vehicle test rig subsystem documet
AnalysisStaticLoad.VerticalLength
The certical length class
The wheel subsystem document
Structs
This struct is to represent the actuator information.
Output channel information
Interfaces
This interface is to represent the document that has the minor role.
The output channel interface
The road file interface
Enums
Specifies type for a batch.
AnalysisTransientBatch.BatchType
Specifies type for a batch.
Specifies type for a cleat shape.
Specifies type for a column of data.
AnalysisExternFiles.ExternFileType
Specifies type for the extern file.
Specifies type for 4-Post analysis.
Specifies type for full car analysis.
AnalysisFrequencyBase.IncrementType
Specifies type for a increment of step.
The suspension minor role type
Specifies type for a Shimmy-Judder analysis.
Specifies type for a side.
TireAnalysisBase.SimulationType
Specifies type for a simulation.
SuspensionDocument.SteeringAxis
SteeringAxis type
Specifies type for suspension analysis.
Specifies type for tire analysis.
AnalysisStaticLoad.VerticalInputType
Specifies type for a vertical input.
Delegates
ApplyParameterOperation.ApplyParameterCallback
Apply parameter delegate
