averaging:extend to mid nodes (fields container)

Version: 0.0.0

Description

Extends Elemental Nodal or Nodal fields defined on corner nodes to Elemental Nodal fields defined also on the mid nodes.

Inputs

This table lists the input pins for this operator. Input pins define the data that the operator requires to perform its operation. Some inputs are required, while others are optional and provide additional configuration. Each parameter is detailed in the sections that follow the table.

fields_container (Pin 0)

• Required: Yes
• Expected type(s): fields_container

mesh (Pin 1)

• Required: No
• Expected type(s): abstract_meshed_region

The mesh region in this pin is used to perform the averaging. It is used if there is no fields support.

Outputs

This table lists the output pins for this operator. Output pins provide the results of the operator's computation and can be connected to inputs of other operators or retrieved for further processing. Each output is detailed in the sections that follow the table.

fields_container (Pin 0)

• Expected type(s): fields_container

Configurations

This operator supports configuration options that modify its behavior.

inplace

• Expected type(s): bool
• Default value: false

The output is written over the input to save memory if this configuration is set to true. Only supported for nodal fields in input.

mutex

• Expected type(s): bool
• Default value: false

If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads.

num_threads

• Expected type(s): int32
• Default value: 0

Number of threads to use to run in parallel

run_in_parallel

• Expected type(s): bool
• Default value: true

Loops are allowed to run in parallel if the value of this config is set to true.

Scripting

This operator can be accessed through scripting interfaces using these identifiers.

Category: averaging

Plugin: core

Scripting name: extend_to_mid_nodes_fc

Full name: averaging.extend_to_mid_nodes_fc

Internal name: extend_to_mid_nodes_fc

License: any_dpf_supported_increments

Examples

These examples demonstrate how to use this operator in different programming environments. Each example shows how to instantiate the operator, connect the required inputs, and retrieve the output.

#include "dpf_api.h"

ansys::dpf::Operator op("extend_to_mid_nodes_fc"); // operator instantiation
op.connect(0, my_fields_container);
op.connect(1, my_mesh);
ansys::dpf::FieldsContainer my_fields_container = op.getOutput<ansys::dpf::FieldsContainer>(0);

import ansys.dpf.core as dpf

op = dpf.operators.averaging.extend_to_mid_nodes_fc() # operator instantiation
op.inputs.fields_container.connect(my_fields_container)
op.inputs.mesh.connect(my_mesh)
my_fields_container = op.outputs.fields_container()

import mech_dpf
import Ans.DataProcessing as dpf

op = dpf.operators.averaging.extend_to_mid_nodes_fc() # operator instantiation
op.inputs.fields_container.Connect(my_fields_container)
op.inputs.mesh.Connect(my_mesh)
my_fields_container = op.outputs.fields_container.GetData()

Changelog

• Version 0.0.0: Initial release.