mesh:morphing

Version: 0.0.0

Description

Applies morphing on a meshed region depending on an input displacement field.

Inputs

This table lists the input pins for this operator. Input pins define the data that the operator requires to perform its operation. Some inputs are required, while others are optional and provide additional configuration. Each parameter is detailed in the sections that follow the table.

displacement (Pin 0)

• Required: Yes
• Expected type(s): field, fields_container

expects either a field or a fields container with one field

disp_mesh (Pin 1)

• Required: No
• Expected type(s): abstract_meshed_region

mesh on which displacement are scoped

mesh (Pin 2)

• Required: Yes
• Expected type(s): abstract_meshed_region

mesh to morph

in_place (Pin 3)

• Required: No
• Expected type(s): bool

Apply in place morhing (the input mesh is changed instead of copied) (default is true)

morphing_type (Pin 4)

• Required: No
• Expected type(s): int32

morphing algorithm to use (0=PrimeRBF, 1=BSpline, 2=TetLinear, 3=TetRBF, 4=FFI) (default is 0)

morphing_manager_data (Pin 5)

• Required: No
• Expected type(s):

Morphing Manager Data from prepare_morphing_operator (needed if disp_coordinates not specified).

sliding_planes (Pin 6)

• Required: No
• Expected type(s): field

Sliding planes

sliding_nodes (Pin 7)

• Required: No
• Expected type(s): scopings_container

Sliding nodes

Outputs

This table lists the output pins for this operator. Output pins provide the results of the operator's computation and can be connected to inputs of other operators or retrieved for further processing. Each output is detailed in the sections that follow the table.

mesh (Pin 0)

• Expected type(s): abstract_meshed_region

morphed mesh

Configurations

This operator supports configuration options that modify its behavior.

mutex

• Expected type(s): bool
• Default value: false

If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads.

num_threads

• Expected type(s): int32
• Default value: 1

run_in_parallel

• Expected type(s): bool
• Default value: false

Loops are allowed to run in parallel if the value of this config is set to true.

Scripting

This operator can be accessed through scripting interfaces using these identifiers.

Category: mesh

Plugin: N/A

Scripting name: morphing

Full name: mesh.morphing

Internal name: morphing

License: any_dpf_supported_increments

Examples

These examples demonstrate how to use this operator in different programming environments. Each example shows how to instantiate the operator, connect the required inputs, and retrieve the output.

#include "dpf_api.h"

ansys::dpf::Operator op("morphing"); // operator instantiation
op.connect(0, my_displacement);
op.connect(1, my_disp_mesh);
op.connect(2, my_mesh);
op.connect(3, my_in_place);
op.connect(4, my_morphing_type);
op.connect(5, my_morphing_manager_data);
op.connect(6, my_sliding_planes);
op.connect(7, my_sliding_nodes);
ansys::dpf::MeshedRegion my_mesh = op.getOutput<ansys::dpf::MeshedRegion>(0);

import ansys.dpf.core as dpf

op = dpf.operators.mesh.morphing() # operator instantiation
op.inputs.displacement.connect(my_displacement)
op.inputs.disp_mesh.connect(my_disp_mesh)
op.inputs.mesh.connect(my_mesh)
op.inputs.in_place.connect(my_in_place)
op.inputs.morphing_type.connect(my_morphing_type)
op.inputs.morphing_manager_data.connect(my_morphing_manager_data)
op.inputs.sliding_planes.connect(my_sliding_planes)
op.inputs.sliding_nodes.connect(my_sliding_nodes)
my_mesh = op.outputs.mesh()

import mech_dpf
import Ans.DataProcessing as dpf

op = dpf.operators.mesh.morphing() # operator instantiation
op.inputs.displacement.Connect(my_displacement)
op.inputs.disp_mesh.Connect(my_disp_mesh)
op.inputs.mesh.Connect(my_mesh)
op.inputs.in_place.Connect(my_in_place)
op.inputs.morphing_type.Connect(my_morphing_type)
op.inputs.morphing_manager_data.Connect(my_morphing_manager_data)
op.inputs.sliding_planes.Connect(my_sliding_planes)
op.inputs.sliding_nodes.Connect(my_sliding_nodes)
my_mesh = op.outputs.mesh.GetData()

Changelog

• Version 0.0.0: Initial release.